HG Internal Gear Pump for Injection Molding

The HG internal gear pump is listed for injection molding and other hydraulic machinery, including servo-driven systems. Its technical table separates HG0, HG1 and HG2 models, with different pressure and minimum-speed limits rather than one universal family rating.

  • Internal gear construction
  • Axial and radial pressure compensation listed
  • HG0, HG1 and HG2 model groups
  • Servo-drive application review requires minimum speed checks

PRANCE HYDRAULIC · PRODUCT SERIES

HG Internal Gear Pump for Injection Molding

Internal gear; pressure compensation · Confirm the selected hydraulic circuit

The HG internal gear pump is listed for injection molding and other hydraulic machinery, including servo-driven systems. Its technical table separates HG0, HG1 and HG2 models, with different pressure and minimum-speed limits rather than one universal family rating.

Model

✓HG original product photograph
إتش جيInternal gear; pressure compensation
Request a Quotationعرض البيانات الفنية وورقة البيانات

Confirm the complete model and approved specification with Prance Hydraulic. Product-series references alone do not establish interchangeability.

Configuration review · Technical documentation · Product selection

تفاصيل المنتج

  • Internal gear construction
  • Axial and radial pressure compensation listed
  • HG0, HG1 and HG2 model groups
  • Servo-drive application review requires minimum speed checks

CATEGORIES: مضخة تروس داخلية, مضخة تروس

HG Features & Application

Internal gear construction

Specify the full MS order code, installation drawing and operating duty so the quotation can identify the proposed configuration.

Axial and radial pressure compensation listed

Keep continuous, intermittent and peak conditions separate. Use the row for the selected size and configuration.

HG0, HG1 and HG2 model groups

Include the series and all order-code suffixes in the enquiry. A common nominal size does not establish compatibility.

Servo-drive application review requires minimum speed checks

Keep continuous, intermittent and peak conditions separate. Use the row for the selected size and configuration.

HG Specifications

Series / modelإتش جي
Product typeHG Internal Gear Pump for Injection Molding
تصميمInternal gear; pressure compensation
Circuit / selectionConfirm the selected hydraulic circuit
Model groupsHG0, HG1 and HG2
Listed geometric displacement8.0–162.8 mL/rev across the published model table
الضغط والسرعةUse the individual model row, not a family-wide maximum

HG Selection & Configuration

The HG internal gear pump is listed for injection molding and other hydraulic machinery, including servo-driven systems. Its technical table separates HG0, HG1 and HG2 models, with different pressure and minimum-speed limits rather than one universal family rating.

In a variable-speed drive, check the lowest speed during pressure holding as carefully as the maximum flow speed. HG0 and the larger model groups have different minimum speeds in the existing table. The HG2 size 160 pressure row is also lower than the other HG2 rows.

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

Your Application.
The Right Configuration.

Hydraulic pumps · Hydraulic motors · Hydraulic valves

Send the MS nameplate, operating requirements and installation drawing for a configuration review before quoting.

  • Model review — send the full model code or an existing nameplate photograph.
  • Interface matching — confirm shaft, mounting flange, rotation and ports.
  • Operating conditions — provide flow, pressure, speed, fluid and duty cycle.
  • Documentation — request the relevant product data and drawings for your review.
Prance workshop with a row of production equipment

HG Buying Guide

Use this sequence to prepare the MS configuration for review and quotation.

  1. Define required flow at the actual drive speed and continuous pressure.
  2. Identify peak pressure, duration and the work cycle.
  3. Confirm the selected displacement control and any auxiliary-drive requirement.
  4. Match rotation viewed from the shaft end, shaft, flange and ports.
  5. Review inlet conditions, drain routing and the installation envelope.
  6. Confirm fluid, viscosity, temperature, filtration and seals.
  7. Approve the complete model, control, drawing, quantity and delivery terms.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

Selection, Documentation & Project Support

Prance technical team image from its company website

Selection Support

Learn more →

Share your hydraulic circuit, operating point and installation requirements for a configuration discussion.


Flow · Pressure · Speed · Interfaces
Prance quality standards image from its company website

Technical Resources

Learn more →

Review product documentation, model codes and technical data before finalizing the specification.


Datasheets · Model codes · Drawings
Prance sales team image from its company website

Project Inquiries

Learn more →

Send your required model, quantity, application and project requirements to discuss your inquiry.


Product inquiries · Configuration review

Configuration, Quantity & Delivery

Confirm the complete MS code, approved drawing and operating limits. Availability, quantity, documentation and delivery date are confirmed in the quotation.

Discuss Your HG Application

Send the full model code, operating duty, installation details and quantity.

Request a HG Quotation

HG Questions Before Ordering

What type of product is the HG?

HG Internal Gear Pump for Injection Molding. Design: Internal gear; pressure compensation. Confirm the selected hydraulic circuit. Confirm the complete order code for the offered version.

Can a similar pump replace the HG?

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

Define required flow at the actual drive speed and continuous pressure. Identify peak pressure, duration and the work cycle. Attach the nameplate, complete order code, installation drawing and required quantity.

HG Technical Data & Documents

View HG catalog data and operating conditions

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.

البيانات الفنية

مواصفات

الموديل الحجم DESP. mL/r الضغط ميجا باسكال سرعة الدوران ر/دقيقة الوزن كجم
مُصنَّف الأقصى الأقصى الأدنى
HG0 8 8.0 25 30 3000 600 4.4
10 10.0 31.5 35 3000 600 4.6
13 13.3 31.5 35 3000 600 4.9
16 16.0 31.5 35 3000 600 5.2
20 20.0 31.5 35 3000 600 5.6
HG1 25 25.3 31.5 35 3000 200 14.5
32 32.7 31.5 35 3000 200 15
40 40.1 31.5 35 3000 200 16
50 50.7 31.5 35 3000 200 17
63 63.7 31.5 35 3000 200 18.5
HG2 80 81.4 31.5 35 3000 200 43.5
100 100.2 31.5 35 3000 200 45.5
125 125.3 31.5 35 3000 200 48
160 162.8 21 26 3000 200 52
Watch HG Product Video
HG product video

Request a HG Quotation

أخبرنا بالتكوين المطلوب، الكمية والتطبيق.

نموذج الاتصال التجريبي
HG original product photograph

البيانات الفنية

مواصفات

الموديل الحجم الوصف.
مل/د
الضغط ميجا باسكال سرعة الدوران ر/دقيقة الوزن كجم
مُصنَّف الأقصى الأقصى الأدنى
HG0 8 8.0 25 30 3000 600 4.4
10 10.0 31.5 35 3000 600 4.6
13 13.3 31.5 35 3000 600 4.9
16 16.0 31.5 35 3000 600 5.2
20 20.0 31.5 35 3000 600 5.6
HG1 25 25.3 31.5 35 3000 200 14.5
32 32.7 31.5 35 3000 200 15
40 40.1 31.5 35 3000 200 16
50 50.7 31.5 35 3000 200 17
63 63.7 31.5 35 3000 200 18.5
HG2 80 81.4 31.5 35 3000 200 43.5
100 100.2 31.5 35 3000 200 45.5
125 125.3 31.5 35 3000 200 48
160 162.8 21 26 3000 200 52

منتج HG النهائي