شركة ونزهو برانس للمعدات الهيدروليكية المحدودة
4WRZE Pilot Operated Proportional Valve
The 4WRZE pilot-operated proportional valve controls flow direction and flow rate. Its subplate interface and spring-centered spool are part of the existing product description. For a press application, valve selection must be tied to the complete machine hydraulic and control design.
- Pilot-operated directional control
- Subplate mounting
- Spring-centered spool
- Proportional electronics must match the valve code
PRANCE HYDRAULIC · PRODUCT SERIES
Pilot-operated proportional directional valve · Subplate-mounted direction and flow control
The 4WRZE pilot-operated proportional valve controls flow direction and flow rate. Its subplate interface and spring-centered spool are part of the existing product description. For a press application, valve selection must be tied to the complete machine hydraulic and control design.
Model

Confirm the complete model and approved specification with Prance Hydraulic. Product-series references alone do not establish interchangeability.
Configuration review · Technical documentation · Product selection
تفاصيل المنتج
- Pilot-operated directional control
- Subplate mounting
- Spring-centered spool
- Proportional electronics must match the valve code
CATEGORIES: صمام هيدروليكي, صمام تناسبي
4WRZE Features & Application
Pilot-operated directional control
Match the complete control option and its command requirements to the existing controller. Similar housings can use different control arrangements.
Subplate mounting
Check pilot diameter, bolt pattern, shaft engagement or port pattern against the approved installation drawing.
Spring-centered spool
Match the circuit symbol, flow condition and mounting interface. The family name alone does not establish the correct spool or electrical option.
Proportional electronics must match the valve code
Match the complete control option and its command requirements to the existing controller. Similar housings can use different control arrangements.
4WRZE Specifications
| Series / model | 4WRZE |
|---|---|
| Product type | 4WRZE Pilot Operated Proportional Valve |
| تصميم | Pilot-operated proportional directional valve |
| Circuit / selection | Subplate-mounted direction and flow control |
| التركيب | Subplate mounting |
| وظيفة التحكم | Proportional direction and flow; confirm spool and electronics |
4WRZE Selection & Configuration
The 4WRZE pilot-operated proportional valve controls flow direction and flow rate. Its subplate interface and spring-centered spool are part of the existing product description. For a press application, valve selection must be tied to the complete machine hydraulic and control design.
Check pilot supply, drain arrangement, spool overlap and command behavior at startup and switch-off. Do not use the series name as evidence of a safety function. Request the specific valve symbol, pressure-drop condition for rated flow and electrical connection drawing.

Your Application.
The Right Configuration.
Hydraulic pumps · Hydraulic motors · Hydraulic valves
Send the MS nameplate, operating requirements and installation drawing for a configuration review before quoting.
- Model review — send the full model code or an existing nameplate photograph.
- Interface matching — confirm shaft, mounting flange, rotation and ports.
- Operating conditions — provide flow, pressure, speed, fluid and duty cycle.
- Documentation — request the relevant product data and drawings for your review.

4WRZE Buying Guide
Use this sequence to prepare the 4WRZE configuration for review and quotation.
- Select the circuit symbol and required de-energized spool position.
- State working flow, pressure and the pressure-drop condition for rated flow.
- Review spool overlap and command behavior during startup and switch-off.
- Confirm nominal size, subplate pattern, port and seal requirements.
- Match supply voltage, command input, connector and pin assignment.
- Review pilot supply, drain and feedback where the selected valve uses them.
- Approve the exact valve code, circuit drawing, quantity and documentation.

Selection, Documentation & Project Support

Selection Support
Learn more →Share your hydraulic circuit, operating point and installation requirements for a configuration discussion.
Flow · Pressure · Speed · Interfaces

Technical Resources
Learn more →Review product documentation, model codes and technical data before finalizing the specification.
Datasheets · Model codes · Drawings

Project Inquiries
Learn more →Send your required model, quantity, application and project requirements to discuss your inquiry.
Product inquiries · Configuration review
Configuration, Quantity & Delivery
Confirm the complete MS code, approved drawing and operating limits. Availability, quantity, documentation and delivery date are confirmed in the quotation.
Discuss Your 4WRZE Application
Send the full model code, operating duty, installation details and quantity.
Request a 4WRZE Quotation4WRZE Questions Before Ordering
What type of product is the 4WRZE?
4WRZE Pilot Operated Proportional Valve. Design: Pilot-operated proportional directional valve. Subplate-mounted direction and flow control. Confirm the complete order code for the offered version.
Can a similar valve replace the 4WRZE?
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
Select the circuit symbol and required de-energized spool position. State working flow, pressure and the pressure-drop condition for rated flow. Attach the nameplate, complete order code, installation drawing and required quantity.
4WRZE Technical Data & Documents
View 4WRZE catalog data and operating conditions
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
البيانات الفنية (للتطبيقات خارج هذه المعايير يرجى استشارتنا)
هيدروليكي (يُقاس باستخدام HLP46، θزيت=40 ℃+5 ℃ و p=100 بار)
| حجم | حجم | 10 | 16 | 25 | 32 | 52 | |
| Operating pressure – Pilot control valve | External pilot oil supply Internal pilot oil supply | بار | 30 إلى 100 | 20 إلى 100 | |||
| _ | |||||||
| بار | 100 to 315 only with “D3” | 100 to 350 only with “D3” | |||||
| -صمام رئيسي | بار | حتى 315 | حتى 350 | حتى 350 | حتى 350 | حتى 350 | |
| ضغط تدفق العودة | – Port T (port R) (external pilot oil retum) | بار | حتى 315 | حتى 250 | حتى 250 | حتى 150 | حتى 250 |
| – Port T (internal pilot oil return) | بار | حتى 30 | حتى 30 | حتى 30 | حتى 30 | – | |
| – Port Y | بار | حتى 30 | حتى 30 | حتى 30 | حتى 30 | حتى 30 | |
| تدفق الصمام الرئيسي | ل/دقيقة | حتى 170 | حتى 460 | حتى 870 | حتى 1600 | حتى 2800 | |
| تدفق الطيار عند المنافذ X و Y مع إشارة إدخال متدرجة 0→100% | ل/دقيقة | 3.5 | 5.5 | 7 | 15.9 | 7 | |
| حجم الطيار لعملية التبديل 0→100% | سم3 | 1.7 | 4.6 | 10 | 26.5 | 54.3 | |
| السائل الهيدروليكي | انظر الجدول أدناه | ||||||
| نطاق درجة حرارة سائل الهيدروليك (عند منافذ عمل الصمام) | ℃ | -20 إلى +80 (يفضل +40 إلى +50) | |||||
| نطاق اللزوجة | mm2/s | 20 إلى 380 (يفضل 30 إلى 46) | |||||
| الحد الأقصى المسموح به لدرجة تلوث سائل الهيدروليك، فئة النظافة وفقًا لـ ISO 4406 (c) | |||||||
| – Pilot control valve | الفئة 18/16/13 1) | ||||||
| – Main valve | الفئة 20/18/15 1) | ||||||
| الهيسيريسيس | % | ≤6 | |||||
| السائل الهيدروليكي | تصنيف | Suitable sealing materials | المعايير | |
| الزيوت المعدنية والهيدروكربونات ذات الصلة | HL، HLP | NBR، FKM | DIN 51524 | |
| مقاوم للاشتعال | -يحتوي على ماء | HFC (Fuchs HYDROTHERM 46M، Petrofer Ultra Safe 620) | NBR | ISO 12922 |
| Important information on hydraulic fluids! -For more information and data on the use of other hydraulic fluids refer to data sheet 90220 or contact us! -There may be limitations regarding the technical valve data (temperature, pressure range, service life , maintenance intervals, etc.)! -The flash point of the process and operating medium used must be 40 K higher than the maximum solenoid surface temperature. – Flame-resistant- wate-containingr: Maximum pressure differential per control edge 175 bar. Pressure pre-loading at the tank port > 20% of the pressure differential; otherwise, increased cavitation. Life cycle as compared to operation with mineral oil HL,HLP 50% to 100% | ||||
Electric
| Valvetype | .WRZ 1) | .WRZE | ||
| Voltage type | Direct voltage | |||
| Command value overlap | % | 15 | ||
| Maximum current | A | 1.5 | 2.5 | |
| Solenoid coil resistance | – Cold value at 20 °C | Ω | 4.8 | 2 |
| – Maximum hot value | Ω | 7.2 | 3 | |
| Duty cycle | % | 100 | ||
| Maximum coil temperature 3) | ℃ | 150 | ||
| Protection class of the valve according to EN 60529 | IP65 with mating connectors mounted and locked | |||
Control electronics
| Type 4WRZ | Digital amplifier in Euro-card format 2) | VT-VSPD-1-2X/…according to data sheet 30523 | ||
| مضخم تماثلي بصيغة بطاقة يورو 2) مع زمن ارتفاع واحد | VT-VSPA2-1-2X/V0/T1، وفقًا لورقة البيانات 30110 | |||
| مضخم تماثلي بصيغة بطاقة يورو 2) مع 5 أزمنة ارتفاع | VT-VSPA2-1-2X/V0/T5، وفقًا لورقة البيانات 30110 | |||
| مضخم وحدة تماثلية 2) | VT-11118-1X/… according to data sheet 30218 | |||
| النوع 4WRZE | وحدة قيمة الأمر التماثلي 2) | متكاملة في الصمام، انظر الصفحة 14 | ||
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | ||||
| وحدة قيمة الأمر التماثلي 2) | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | |||
| Digital command value card 2) | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | |||
| بطاقة قيمة الأمر التناظرية 2) | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | |||
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | Iالحد الأقصى | A | - | 1.8 |
| – Impulse current | A | - | 3 | |
| إشارة قيمة الأمر | – Voltage input “A1” | V | - | ±10 |
| – Current input “F1” | mA | - | 4 to 20 | |
Watch 4WRZE Product Video
Related Selection Resources
Request a 4WRZE Quotation
أخبرنا بالتكوين المطلوب، الكمية والتطبيق.
البيانات الفنية (للتطبيقات خارج هذه المعايير يرجى استشارتنا)
هيدروليكي (يُقاس باستخدام HLP46، θزيت=40 ℃+5 ℃ و p=100 بار)
| حجم | حجم | 10 | 16 | 25 | 32 | 52 | |
| ضغط التشغيل - صمام تحكم بواسطة الطيار |
توريد الزيت الخارجي للطيار توريد الزيت الداخلي للطيار |
بار | 30 إلى 100 | 20 إلى 100 | |||
| _ | |||||||
| بار | 100 إلى 315 فقط مع "D3" | 100 إلى 350 فقط مع "D3" | |||||
| -صمام رئيسي | بار | حتى 315 | حتى 350 | حتى 350 | حتى 350 | حتى 350 | |
| ضغط تدفق العودة | - منفذ T (منفذ R) (عائد زيت الطيار الخارجي) |
بار | حتى 315 | حتى 250 | حتى 250 | حتى 150 | حتى 250 |
| - منفذ T (عائد زيت الطيار الداخلي) |
بار | حتى 30 | حتى 30 | حتى 30 | حتى 30 | - | |
| - منفذ Y | بار | حتى 30 | حتى 30 | حتى 30 | حتى 30 | حتى 30 | |
| تدفق الصمام الرئيسي | ل/دقيقة | حتى 170 | حتى 460 | حتى 870 | حتى 1600 | حتى 2800 | |
| تدفق الطيار عند المنافذ X و Y مع إشارة إدخال متدرجة 0→100% | ل/دقيقة | 3.5 | 5.5 | 7 | 15.9 | 7 | |
| حجم الطيار لعملية التبديل 0→100% | سم3 | 1.7 | 4.6 | 10 | 26.5 | 54.3 | |
| السائل الهيدروليكي | انظر الجدول أدناه | ||||||
| نطاق درجة حرارة سائل الهيدروليك (عند منافذ عمل الصمام) | ℃ | -20 إلى +80 (يفضل +40 إلى +50) | |||||
| نطاق اللزوجة | mm2/s | 20 إلى 380 (يفضل 30 إلى 46) | |||||
| الحد الأقصى المسموح به لدرجة تلوث سائل الهيدروليك، فئة النظافة وفقًا لـ ISO 4406 (c) | |||||||
| - صمام تحكم بواسطة الطيار | الفئة 18/16/13 1) | ||||||
| - الصمام الرئيسي | الفئة 20/18/15 1) | ||||||
| الهيسيريسيس | % | ≤6 | |||||
يجب الالتزام بفصول النظافة المحددة للمكونات في الأنظمة الهيدروليكية. الترشيح الفعال يمنع الأعطال وفي نفس الوقت يزيد من عمر المكونات.
| السائل الهيدروليكي | تصنيف | مناسب مواد الختم |
المعايير | |
| الزيوت المعدنية والهيدروكربونات ذات الصلة | HL، HLP | NBR، FKM | DIN 51524 | |
| مقاوم للاشتعال | -يحتوي على ماء | HFC (Fuchs HYDROTHERM 46M، Petrofer Ultra Safe 620) | NBR | ISO 12922 |
| معلومات مهمة عن السوائل الهيدروليكية! -لمزيد من المعلومات والبيانات حول استخدام سوائل هيدروليكية أخرى، يرجى الرجوع إلى ورقة البيانات 90220 أو الاتصال بنا! -قد تكون هناك قيود تتعلق ببيانات الصمام الفنية (درجة الحرارة، نطاق الضغط، عمر الخدمة، فترات الصيانة، إلخ)! -يجب أن يكون نقطة الوميض للوسط المستخدم في العملية والتشغيل 40 كلفن أعلى من أقصى درجة حرارة سطح الملف اللولبي. - مقاوم للاشتعال-يحتوي على ماء: الحد الأقصى لفارق الضغط لكل حافة تحكم هو 175 بار. تحميل الضغط المسبق عند منفذ الخزان > 20% لفارق الضغط؛ وإلا، يحدث تكوين فراغ متزايد. - Life cycle as compared to operation with mineral oil HL,HLP 50% to 100% |
||||
Electric
| Valvetype | .WRZ 1) | .WRZE | ||
| Voltage type | Direct voltage | |||
| Command value overlap | % | 15 | ||
| Maximum current | A | 1.5 | 2.5 | |
| Solenoid coil resistance | - Cold value at 20 °C | Ω | 4.8 | 2 |
| - Maximum hot value | Ω | 7.2 | 3 | |
| Duty cycle | % | 100 | ||
| Maximum coil temperature 3) | ℃ | 150 | ||
| Protection class of the valve according to EN 60529 | IP65 with mating connectors mounted and locked | |||
Control electronics
| Type 4WRZ | Digital amplifier in Euro-card format 2) | VT-VSPD-1-2X/...وفقًا لورقة البيانات 30523 | ||
| مضخم تماثلي بصيغة بطاقة يورو 2) مع زمن ارتفاع واحد |
VT-VSPA2-1-2X/V0/T1، وفقًا لورقة البيانات 30110 | |||
| مضخم تماثلي بصيغة بطاقة يورو 2) مع 5 أزمنة ارتفاع |
VT-VSPA2-1-2X/V0/T5، وفقًا لورقة البيانات 30110 | |||
| مضخم وحدة تماثلية 2) | VT-11118-1X/... وفقًا لورقة البيانات 30218 | |||
| النوع 4WRZE | وحدة قيمة الأمر التماثلي 2) | متكاملة في الصمام، انظر الصفحة 14 | ||
| VT- SWMA-1-1X/... وفقًا لورقة البيانات 29902 | ||||
| وحدة قيمة الأمر التماثلي 2) | VT-SWMAK-1-1X/... according to data sheet 29903 | |||
| Digital command value card 2) | VT-HACD-1-1X/... وفقًا لورقة البيانات 30143 | |||
| بطاقة قيمة الأمر التناظرية 2) | VT-SWKA-1-1X/... according to data sheet 30255 | |||
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | Iالحد الأقصى | A | - | 1.8 |
| - التيار النبضي | A | - | 3 | |
| إشارة قيمة الأمر | - إدخال الجهد "A1" | V | - | ±10 |
| - إدخال التيار "F1" | mA | - | 4 to 20 | |
1) مع إلكترونيات التحكم من شركة بوش ريكسروث
2) Separate order
3) نظرًا لدرجات الحرارة التي تحدث على أسطح ملفات الملف اللولبي، يجب الالتزام بالمعايير الأوروبية ISO 13732-1 و EN 982.







