4WRZE Pilot Operated Proportional Valve

The 4WRZE pilot-operated proportional valve controls flow direction and flow rate. Its subplate interface and spring-centered spool are part of the existing product description. For a press application, valve selection must be tied to the complete machine hydraulic and control design.

  • Pilot-operated directional control
  • Subplate mounting
  • Spring-centered spool
  • Proportional electronics must match the valve code
HOME › Hydraulikventile › 4WRZE

PRANCE HYDRAULIC · PRODUCT SERIES

4WRZE Pilot Operated Proportional Valve

Pilot-operated proportional directional valve · Subplate-mounted direction and flow control

The 4WRZE pilot-operated proportional valve controls flow direction and flow rate. Its subplate interface and spring-centered spool are part of the existing product description. For a press application, valve selection must be tied to the complete machine hydraulic and control design.

Model

✓cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
4WRZEPilot-operated proportional directional valve
Request a QuotationTechnische Daten & Datenblatt anzeigen

Confirm the complete model and approved specification with Prance Hydraulic. Product-series references alone do not establish interchangeability.

Configuration review · Technical documentation · Product selection

Produktdetails

  • Pilot-operated directional control
  • Subplate mounting
  • Spring-centered spool
  • Proportional electronics must match the valve code

CATEGORIES: Hydraulikventil, Proportionalventil

4WRZE Features & Application

Pilot-operated directional control

Match the complete control option and its command requirements to the existing controller. Similar housings can use different control arrangements.

Subplate mounting

Check pilot diameter, bolt pattern, shaft engagement or port pattern against the approved installation drawing.

Spring-centered spool

Match the circuit symbol, flow condition and mounting interface. The family name alone does not establish the correct spool or electrical option.

Proportional electronics must match the valve code

Match the complete control option and its command requirements to the existing controller. Similar housings can use different control arrangements.

4WRZE Specifications

Series / model4WRZE
Product type4WRZE Pilot Operated Proportional Valve
DesignPilot-operated proportional directional valve
Circuit / selectionSubplate-mounted direction and flow control
MontageSubplate mounting
SteuerungsfunktionProportional direction and flow; confirm spool and electronics

4WRZE Selection & Configuration

The 4WRZE pilot-operated proportional valve controls flow direction and flow rate. Its subplate interface and spring-centered spool are part of the existing product description. For a press application, valve selection must be tied to the complete machine hydraulic and control design.

Check pilot supply, drain arrangement, spool overlap and command behavior at startup and switch-off. Do not use the series name as evidence of a safety function. Request the specific valve symbol, pressure-drop condition for rated flow and electrical connection drawing.

4WRZE original product view

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.

Hydraulic pumps · Hydraulic motors · Hydraulic valves

Send the MS nameplate, operating requirements and installation drawing for a configuration review before quoting.

  • Model review — send the full model code or an existing nameplate photograph.
  • Interface matching — confirm shaft, mounting flange, rotation and ports.
  • Operating conditions — provide flow, pressure, speed, fluid and duty cycle.
  • Documentation — request the relevant product data and drawings for your review.
Prance workshop with a row of production equipment

4WRZE Buying Guide

Use this sequence to prepare the 4WRZE configuration for review and quotation.

  1. Select the circuit symbol and required de-energized spool position.
  2. State working flow, pressure and the pressure-drop condition for rated flow.
  3. Review spool overlap and command behavior during startup and switch-off.
  4. Confirm nominal size, subplate pattern, port and seal requirements.
  5. Match supply voltage, command input, connector and pin assignment.
  6. Review pilot supply, drain and feedback where the selected valve uses them.
  7. Approve the exact valve code, circuit drawing, quantity and documentation.
4WRZE original product photograph for installation review

Selection, Documentation & Project Support

Prance technical team image from its company website

Selection Support

Learn more →

Share your hydraulic circuit, operating point and installation requirements for a configuration discussion.


Flow · Pressure · Speed · Interfaces
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

Technical Resources

Learn more →

Review product documentation, model codes and technical data before finalizing the specification.


Datasheets · Model codes · Drawings
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

Project Inquiries

Learn more →

Send your required model, quantity, application and project requirements to discuss your inquiry.


Product inquiries · Configuration review

Configuration, Quantity & Delivery

Confirm the complete MS code, approved drawing and operating limits. Availability, quantity, documentation and delivery date are confirmed in the quotation.

Discuss Your 4WRZE Application

Send the full model code, operating duty, installation details and quantity.

Request a 4WRZE Quotation

4WRZE Questions Before Ordering

What type of product is the 4WRZE?

4WRZE Pilot Operated Proportional Valve. Design: Pilot-operated proportional directional valve. Subplate-mounted direction and flow control. Confirm the complete order code for the offered version.

Can a similar valve replace the 4WRZE?

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

Select the circuit symbol and required de-energized spool position. State working flow, pressure and the pressure-drop condition for rated flow. Attach the nameplate, complete order code, installation drawing and required quantity.

4WRZE Technical Data & Documents

View 4WRZE catalog data and operating conditions

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.

Technische Daten (für Anwendungen außerhalb dieser Parameter sprechen Sie uns bitte an!)

hydraulisch (gemessen mit HLP46, θÖl= 40 ℃ + 5 ℃ und p = 100 bar)

Größe Größe 10 16 25 32 52
Operating pressure – Pilot control valve External pilot oil supply Internal pilot oil supply Bar 30 bis 100 20 bis 100
_
Bar 100 to 315 only with “D3” 100 to 350 only with “D3”
Hauptventil Bar Bis zu 315 Bis zu 350 Bis zu 350 Bis zu 350 Bis zu 350
Rücklaufdruck – Port T (port R) (external pilot oil retum) Bar Bis zu 315 Bis zu 250 Bis zu 250 Bis zu 150 Bis zu 250
– Port T (internal pilot oil return) Bar Bis zu 30 Bis zu 30 Bis zu 30 Bis zu 30 –
– Port Y Bar Bis zu 30 Bis zu 30 Bis zu 30 Bis zu 30 Bis zu 30
Hauptventil-Durchfluss l/min Bis zu 170 Bis zu 460 Bis zu 870 Bis zu 1600 Bis zu 2800
Pilotfluss an den Anschlüssen X und Y bei stufenweisem Eingangssignal 0→100% l/min 3.5 5.5 7 15.9 7
Pilotvolumen für den Schaltvorgang 0→100% cm3 1.7 4.6 10 26.5 54.3
Hydraulikflüssigkeit Siehe Tabelle unten
Hydraulikflüssigkeit-Temperaturbereich (an den Ventil-Arbeitsanschlüssen) ℃ -20 bis +80 (vorzugsweise +40 bis +50)
Viskositätsbereich mm2/s 20 bis 380 (vorzugsweise 30 bis 46)
Höchstzulässiger Verschmutzungsgrad der Hydraulikflüssigkeit, Reinheitsklasse nach ISO 4406 (c)
– Pilot control valve Klasse 18/16/13 1)
– Main valve Klasse 20/18/15 1)
Hysterese % ≤6
Die für die Komponenten vorgeschriebenen Sauberkeitsklassen müssen in Hydrauliksystemen eingehalten werden. Eine effektive Filtration verhindert Störungen und erhöht gleichzeitig die Lebensdauer der Komponenten.
Hydraulikflüssigkeit Klassifikation Suitable sealing materials Standards
Mineralöle und verwandte Kohlenwasserstoffe HL, HLP NBR, FKM DIN 51524
flammhemmend wasserhaltig HFC (Fuchs HYDROTHERM 46M, Petrofer Ultra Safe 620) NBR ISO 12922
Important information on hydraulic fluids! -For more information and data on the use of other hydraulic fluids refer to data sheet 90220 or contact us! -There may be limitations regarding the technical valve data (temperature, pressure range, service life , maintenance intervals, etc.)! -The flash point of the process and operating medium used must be 40 K higher than the maximum solenoid surface temperature. – Flame-resistant- wate-containingr: Maximum pressure differential per control edge 175 bar. Pressure pre-loading at the tank port > 20% of the pressure differential; otherwise, increased cavitation. Life cycle as compared to operation with mineral oil HL,HLP 50% to 100%

Elektrisch

Ventiltyp .WRZ 1) .WRZE
Spannungsart Gleichspannung
Sollwert-Überlappung % 15
Maximaler Strom A 1.5 2.5
Magnetspulenwiderstand – Cold value at 20 °C Ω 4.8 2
– Maximum hot value Ω 7.2 3
Einschaltdauer % 100
Maximale Spulentemperatur 3) ℃ 150
Schutzart des Ventils nach EN 60529 IP65 bei montierten und verriegelten Gegensteckern

Steuerelektronik

Typ 4WRZ Digitalverstärker im Eurokartenformat 2) VT-VSPD-1-2X/…according to data sheet 30523
Analanger Verstärker im Eurokartenformat 2) mit 1 Ramopenzeit VT-VSPA2-1-2X/V0/T1, gemäß Datenblatt 30110
Analanger Verstärker im Eurokartenformat 2) mit 5 Rampenzeiten VT-VSPA2-1-2X/V0/T5, gemäß Datenblatt 30110
Analog-Modulverstärker 2) VT-11118-1X/… according to data sheet 30218
Typ 4WRZE Analoger Sollwert-Befehlsgeber 2) Im Ventil integriert, siehe Seite 14
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
Analoger Sollwert-Befehlsgeber 2) cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
Digitale Sollwertkarte 2) cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
Analoge Sollwertkarte 2) cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
Stromverbrauch IMax A - 1.8
– Impulse current A - 3
Führungsgröße – Voltage input “A1” V - ±10
– Current input “F1” mA - 4 bis 20
1) With Bosch Rexroth AG control electronics 2) Separate order 3) Due to the temperatures occurring at the surfaces of the solenoid coils, the European standards ISO 13732-1 and EN 982 need to be adhered to.
Watch 4WRZE Product Video
4WRZE product video

Request a 4WRZE Quotation

Tell us your required configuration, quantity and application.

Kontaktformular-Demo
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

Technische Daten (für Anwendungen außerhalb dieser Parameter sprechen Sie uns bitte an!)

hydraulisch (gemessen mit HLP46, θÖl= 40 ℃ + 5 ℃ und p = 100 bar)

Größe Größe 10 16 25 32 52
Betriebsdruck
- Vorsteuerventil
Externe Vorsteuerölversorgung
Interne Steuerölversorgung
Bar 30 bis 100 20 bis 100
_
Bar 100 bis 315 nur mit "D3" 100 bis 350 nur mit "D3"
Hauptventil Bar Bis zu 315 Bis zu 350 Bis zu 350 Bis zu 350 Bis zu 350
Rücklaufdruck - Port T (Port R)
(Externer Steuerölrücklauf)
Bar Bis zu 315 Bis zu 250 Bis zu 250 Bis zu 150 Bis zu 250
- Port T
(interner Steuerölrücklauf)
Bar Bis zu 30 Bis zu 30 Bis zu 30 Bis zu 30 -
- Hafen Y Bar Bis zu 30 Bis zu 30 Bis zu 30 Bis zu 30 Bis zu 30
Hauptventil-Durchfluss l/min Bis zu 170 Bis zu 460 Bis zu 870 Bis zu 1600 Bis zu 2800
Pilotfluss an den Anschlüssen X und Y bei stufenweisem Eingangssignal 0→100% l/min 3.5 5.5 7 15.9 7
Pilotvolumen für den Schaltvorgang 0→100% cm3 1.7 4.6 10 26.5 54.3
Hydraulikflüssigkeit Siehe Tabelle unten
Hydraulikflüssigkeit-Temperaturbereich (an den Ventil-Arbeitsanschlüssen) ℃ -20 bis +80 (vorzugsweise +40 bis +50)
Viskositätsbereich mm2/s 20 bis 380 (vorzugsweise 30 bis 46)
Höchstzulässiger Verschmutzungsgrad der Hydraulikflüssigkeit, Reinheitsklasse nach ISO 4406 (c)
- Vorsteuerventil Klasse 18/16/13 1)
- Hauptventil Klasse 20/18/15 1)
Hysterese % ≤6

Die für die Komponenten vorgeschriebenen Sauberkeitsklassen müssen in Hydrauliksystemen eingehalten werden. Eine effektive Filtration verhindert Störungen und erhöht gleichzeitig die Lebensdauer der Komponenten.

Hydraulikflüssigkeit Klassifikation Geeignet
Dichtungsmaterialien
Standards
Mineralöle und verwandte Kohlenwasserstoffe HL, HLP NBR, FKM DIN 51524
flammhemmend wasserhaltig HFC (Fuchs HYDROTHERM 46M, Petrofer Ultra Safe 620) NBR ISO 12922
Wichtige Informationen zu Hydraulikflüssigkeiten!
-Für weitere Informationen und Daten zur Verwendung anderer Hydraulikflüssigkeiten siehe Datenblatt 90220 oder kontaktieren Sie uns!
-Es kann Einschränkungen hinsichtlich der technischen Ventilatexdaten (Temperatur, Druckbereich, Lebenszyklus, Wartungsintervalle usw.) geben!
- Der Flammpunkt des verwendeten Prozess- und Betriebsmediums muss 40 K über der maximalen Magnetoberflächentemperatur liegen.
- Flammhemmend – wasserhaltig: Der maximale Druckunterschied pro Steuerkante beträgt 175 bar. Die Druckvorspannung am Tankanschluss muss > 20% des Druckunterschieds betragen; andernfalls kommt es zu verstärkter Kavitation.
- Lebensdauer im Vergleich zum Betrieb mit Mineralöl HL, HLP 50% bis 100%

Elektrisch

Ventiltyp .WRZ 1) .WRZE
Spannungsart Gleichspannung
Sollwert-Überlappung % 15
Maximaler Strom A 1.5 2.5
Magnetspulenwiderstand - Kaltwert bei 20 °C Ω 4.8 2
- Maximaler Heißwert Ω 7.2 3
Einschaltdauer % 100
Maximale Spulentemperatur 3) ℃ 150
Schutzart des Ventils nach EN 60529 IP65 bei montierten und verriegelten Gegensteckern

Steuerelektronik

Typ 4WRZ Digitalverstärker im Eurokartenformat 2) VT-VSPD-1-2X/...gemäß Datenblatt 30523
Analanger Verstärker im Eurokartenformat 2)
mit 1 Ramopenzeit
VT-VSPA2-1-2X/V0/T1, gemäß Datenblatt 30110
Analanger Verstärker im Eurokartenformat 2)
mit 5 Rampenzeiten
VT-VSPA2-1-2X/V0/T5, gemäß Datenblatt 30110
Analog-Modulverstärker 2) VT-11118-1X/... gemäß Datenblatt 30218
Typ 4WRZE Analoger Sollwert-Befehlsgeber 2) Im Ventil integriert, siehe Seite 14
VT-SWMA-1-1X/... gemäß Datenblatt 29902
Analoger Sollwert-Befehlsgeber 2) VT-SWMAK-1-1X/... gemäß Datenblatt 29903
Digitale Sollwertkarte 2) VT-HACD-1-1X/... gemäß Datenblatt 30143
Analoge Sollwertkarte 2) VT-SWKA-1-1X/... gemäß Datenblatt 30255
Stromverbrauch IMax A - 1.8
- Stoßstrom A - 3
Führungsgröße - Spannungseingang "A1" V - ±10
- Aktuelle Eingabe "F1" mA - 4 bis 20

1) Mit Bosch Rexroth AG Steuerungselektronik

2) Getrennte Bestellung

3) Aufgrund der an den Oberflächen der Magnetspulen auftretenden Temperaturen müssen die europäischen Normen ISO 13732-1 und EN 982 eingehalten werden.

4WRZE