Wenzhou Prance Hydraulic Equipment Co., Ltd.
Hydraulic Variable Displacement Piston Pump A10VNO
1.Axial piston variable pump in swashplate design forhydrostatic drives in open circuits
2.Flow is proportional to drive speed and displacement. It canbe infinitely varied by adjustment of the swashplate.
3.High power to weight ratio-small dimensions
4.Low noise level
5.Permissible continuous pressure 210 bar
6.Axial and radial loading of drive shaft possible- Pressure and flow control
Detaillierte Beschreibung
This is an axial piston variable pump with a swashplate design, specifically engineered for hydrostatic drive systems in open circuits, making it suitable for a wide range of industrial and mobile hydraulic applications. The pump’s output flow is directly proportional to its drive speed and displacement; by adjusting the swashplate angle precisely, the flow can be infinitely and steplessly varied, allowing flexible adaptation to the changing flow requirements of the hydraulic system during operation. It features a high power-to-weight ratio paired with small dimensions, which effectively saves installation space, reduces the overall weight of the supporting equipment, and simplifies layout in compact installation environments. Additionally, the pump operates at a low noise level, ensuring quiet and stable performance, which is ideal for noise-sensitive working sites. Its permissible continuous pressure is 210 bar, enabling reliable long-term operation under rated pressure conditions. The drive shaft supports both axial and radial loading, enhancing its adaptability to different installation configurations, and it is equipped with integrated pressure and flow control functions to achieve accurate regulation of the hydraulic system.
Auswahl und Preisanfrage
Diese Produktreihe sollte anhand des freigegebenen Hydraulikkreises ausgewählt werden. Bestätigen Sie vor der endgültigen Auswahl den erforderlichen Volumenstrom oder das Verdrängungsvolumen, den Dauer- und Spitzendruck, die Antriebsdrehzahl, die Steuerungsart, das Fluid und die Einbauschnittstelle.
Angaben für Ihre Angebotsanfrage
- Erforderliches Verdrängungsvolumen oder Förderstrom bei Betriebsdrehzahl
- Dauerdruck und Spitzendruck des Systems
- Antriebsgeschwindigkeit, Steuerungsanforderung und Schaltungsart
- Montageflansch, Welle, Anschlüsse, Fluid- und Filtrationsanforderung
Verwandte Ressourcen
Ordering code - Standard program
| A10VN | ○ | DRS | / | 5x | - | V | R | C | N00 | |||
| 01 | 02 | 03 | 04 | 05 | 06 | 07 | 08 | 09 | 10 | 11 |
Axialkolbeneinheit
| 01 | Swash plate design, variable, nominal pressure 210 bar, peak pressure 250 bar | A10VN |
Type of operation
| 02 | Pumpe, offener Kreisklauf | ○ |
Größe
| 28 | 45 | 63 | 85 | |||
| 03 | ~Displacement VG-Max in | in3 | 1.71 | 2.75 | 3.84 | 5.19 |
| cm3 | 28 | 45 | 63 | 85 |
Steuergerät
| 04 | Druckregelung | |
| with flow control, hydraulic, X-T closed | DRS | |
Serie
| 05 | Series 5 | Index 2 | - | ● | ● | - | 52 |
| Index 3 | ● | - | - | ● | 53 |
Drehrichtung
| 06 | Viewed on shaft end | right hand | R |
| left hand | L |
Robben
| 07 | FKM(Fluor-rubber) | V |
Wellenende
| 08 | Splined to SAE J744 | R |
Montageflansch
| 09 | SAE 2-hole | c |
Ports for service lines
| 10 | ISO 6149-1 threaded ports at rear, metric | - | ● | - | - | 40 |
| SAE flange ports at rear, metric bolt holes | ● | - | ● | ● | 11 |
Technische Daten
Operating pressure range, inlet
Absolutdruck an Anschluss S
Pabs min---------------------------12 psi (0,8 bar)
Pabs max---------------------------73 psi (5 bar)
Operating pressure range, outlet
Druck an Anschluss B
Nenndruck PN---------------3000 psi (210 bar)
Spitzendruck PMax------------------3600 psi (250 bar)
(Pressures to DIN 24312)
Direction of flow
S to B
Lecköldruck
Maximum permissible case drain pressure (port Lx):
maximum 7 psi (0,5 bar) higher than the inlet pressure at port S, however not higher than 29 psi (2 bar) absolute.
PLabs max---------------------------29 psi (2 bar)
Table of values (theoretical values, without considering efficiencies and tolerances; values rounded)
| Größe | 28 | 45 | 63 | 85 | |||
| Verschiebung | Vg Max | in3 (cm3) | 1.71(28) | 2.75 (45) | 3.84(63) | 5.19(85) | |
| Speed2) | |||||||
| max.at VG-Max | n0 Max 11) | min-1 | 3200 | 2900 | 2700 | 2700 | |
| Fluss | |||||||
| at n0 max | qv0 Max 11) | gpm | 23.8 | 34.6 | 45 | 60.8 | |
| (L/min) | (90) | (131) | (170) | (230) | |||
| Macht | Δp= 3000 psi (210 bar) | ||||||
| at n0 max | P0 Max 11) | HP(kW) | 42 (31) | 62(46) | 79 (59) | 107 (80) | |
| Drehmoment | Δp= 3000 psi (210 bar) | ||||||
| at VG-Max | TMax | lb-ft (Nm) | 69 (94) | 110 (150) | 155 (210) | 209 (284) | |
| Torsional stiffness | shaft end R | c | lb-ft/rad
(Nm/rad) |
10882 | 19480 | 29770 | 51029 |
| (14800) | (26500) | (40500) | (69400) | ||||
| Moment of inertia rotary group | JTW | lb-ft/rad
(kgm2) |
0.0403 | 0.0474 | 0.0949 | 0.423 | |
| (0,001) | (0,002) | (0,004) | (0,006) | ||||
| Angular acceleration, max.2) | α | rad/s2 | 6800 | 4900 | 3500 | 2500 | |
| Fallzahl | V | gal(L) | 0.08 (0,25) | 0.08 (0,3) | 0.13 (0,5) | 0.21 (0,8) | |
| Weight (with press. control) | m | lbs (kg) | 25.3 (11,5) | 31 (14) | 39.7 (18) | 48.5 (22) | |
1)self priming with absolute pressure of 15 psi (1 bar) at inlet port S
2) -These values are valid for conditions between the min. required and the max. permissible drive speeds.
For external sources of excitation (eg. diesel engine 2-8 fold rotary frequency, cardan shaft 2-fold rotary frequency).
-The limit is valid for a single pump.
-The load carrying capacity of the connecting parts must be taken into consideration.
Caution:Exceeding these limits can lead to a loss of operability, reduction of service life or complete destruction of the axial piston unit.
The permissible values can be calculated
Determination of pump size
| Fluss | qv=(Vg ∙ n ∙ ηv) /231(1000) | gpm(L/min) |
| Drehmoment | M=(Vg ∙ Δp) / 24(20) ∙ π ∙ ηmh | lb-ft(Nm) |
| Macht | P=(2π ∙ M ∙ n)/33000(60000)=(qv ∙ p)/[1714(600) ∙ ηt] | HP(kW) |
Vg=geometr. displacement per revolution in in3 (cm3)
p = pressure differential in psi (bar)
n= drive speed in rpm
ηv = volumetric efficiency
ηmh= mechanical-hydraulic efficiency
ηt=overall efficiency (ηt= ηv*ηmh)
Permissible radial and axial loading on drive shaft
| Größe | 28 | 45 | 63 | 85 | ||||
| Radial force, max. |  |
bei X/2 | FQ-max | lbf | 79 | 146 | 225 | 303 |
| (N) | (350) | (650) | (1000) | (1350) | ||||
| Axial force, max. |  |
FAxt | lbf | 157,4 | 146 | 225 | 303 | |
| (N) | (700) | (650) | (1000) | (1350) | ||||
