PVP Variable Displacement Piston Pump

The PVP variable displacement piston pump is listed with a cast-iron, two-piece housing and replaceable wear components. An enquiry should identify the control arrangement as well as the mechanical mounting, because similar pump bodies can respond differently to the same circuit.

  • Cast-iron housing listed
  • Two-piece housing construction
  • Replaceable port plate and slipper plate listed
  • Through-shaft configuration available subject to order

PRANCE HYDRAULIC · PRODUCT SERIES

PVP Variable Displacement Piston Pump

Axial piston; variable displacement · Confirm the selected open-circuit arrangement

The PVP variable displacement piston pump is listed with a cast-iron, two-piece housing and replaceable wear components. An enquiry should identify the control arrangement as well as the mechanical mounting, because similar pump bodies can respond differently to the same circuit.

Modèle

✓PVP original product photograph
JcJAxial piston; variable displacement
Demander un devisVoir les données techniques et la fiche technique

Confirm the complete model and approved specification with Prance Hydraulic. Product-series references alone do not establish interchangeability.

Étude de configuration · Documentation technique · Sélection de produits

Détails du produit

  • Cast-iron housing listed
  • Two-piece housing construction
  • Replaceable port plate and slipper plate listed
  • Through-shaft configuration available subject to order

CATÉGORIES : Pompe à piston, Pompe à cylindrée variable

PVP Features & Application

Cast-iron housing listed

Specify the full MS order code, installation drawing and operating duty so the quotation can identify the proposed configuration.

Two-piece housing construction

Specify the full MS order code, installation drawing and operating duty so the quotation can identify the proposed configuration.

Replaceable port plate and slipper plate listed

Compare the required flow at the actual drive speed and pressure. Check the selected variant rather than combining maxima from different rows.

Through-shaft configuration available subject to order

Review combined drive torque and simultaneous demand, including any additional pump connected to the drive.

PVP Specifications

Series / modelJcJ
Product typePVP Variable Displacement Piston Pump
ConceptionAxial piston; variable displacement
Circuit / selectionConfirm the selected open-circuit arrangement
BoîtierCast iron; two-piece construction listed
Numerical operating ratingsRequest the exact PVP size and control data before approval

PVP Selection & Configuration

The PVP variable displacement piston pump is listed with a cast-iron, two-piece housing and replaceable wear components. An enquiry should identify the control arrangement as well as the mechanical mounting, because similar pump bodies can respond differently to the same circuit.

For a through-shaft assembly, confirm the torque carried by the first shaft and the mounting loads from the added pump. Metric pilot, shaft and port availability must be checked for the requested configuration rather than assumed from the series description.

PVP original product view

Your Application.
The Right Configuration.

Hydraulic pumps · Hydraulic motors · Hydraulic valves

Send the MS nameplate, operating requirements and installation drawing for a configuration review before quoting.

  • Model review — send the full model code or an existing nameplate photograph.
  • Interface matching — confirm shaft, mounting flange, rotation and ports.
  • Operating conditions — provide flow, pressure, speed, fluid and duty cycle.
  • Documentation — request the relevant product data and drawings for your review.
Prance workshop with a row of production equipment

PVP Buying Guide

Use this sequence to prepare the MS configuration for review and quotation.

  1. Define required flow at the actual drive speed and continuous pressure.
  2. Identify peak pressure, duration and the work cycle.
  3. Confirm the selected displacement control and any auxiliary-drive requirement.
  4. Match rotation viewed from the shaft end, shaft, flange and ports.
  5. Review inlet conditions, drain routing and the installation envelope.
  6. Confirm fluid, viscosity, temperature, filtration and seals.
  7. Approve the complete model, control, drawing, quantity and delivery terms.
PVP original product photograph for installation review

Selection, Documentation & Project Support

Prance technical team image from its company website

Selection Support

Learn more →

Share your hydraulic circuit, operating point and installation requirements for a configuration discussion.


Flow · Pressure · Speed · Interfaces
Prance quality standards image from its company website

Technical Resources

Learn more →

Review product documentation, model codes and technical data before finalizing the specification.


Datasheets · Model codes · Drawings
Prance sales team image from its company website

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

Learn more →

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.


cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

Configuration, Quantity & Delivery

Confirm the complete MS code, approved drawing and operating limits. Availability, quantity, documentation and delivery date are confirmed in the quotation.

Discuss Your PVP Application

Send the full model code, operating duty, installation details and quantity.

Request a PVP Quotation

PVP Questions Before Ordering

What type of product is the PVP?

PVP Variable Displacement Piston Pump. Design: Axial piston; variable displacement. Confirm the selected open-circuit arrangement. Confirm the complete order code for the offered version.

Can a similar pump replace the PVP?

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

Define required flow at the actual drive speed and continuous pressure. Identify peak pressure, duration and the work cycle. Attach the nameplate, complete order code, installation drawing and required quantity.

PVP Technical Data & Documents

Configuration Data for Your Enquiry

For a through-shaft assembly, confirm the torque carried by the first shaft and the mounting loads from the added pump. Metric pilot, shaft and port availability must be checked for the requested configuration rather than assumed from the series description.

Request the displacement or flow rating, pressure limits, operating speed or electrical data applicable to the exact offered model. A photograph or family name does not establish a numerical rating.

Watch PVP Product Video
PVP product video

Request a PVP Quotation

Tell us your required configuration, quantity and application.

Démo du formulaire de contact
PVP original product photograph

JcJ