شركة ونزهو برانس للمعدات الهيدروليكية المحدودة
A10VZO Variable Speed Axial Piston Pump
The A10VZO variable pump is listed for start/stop, pressure-holding and multiple-quadrant operation. Its selection should therefore include how the drive behaves during decompression and energy return, not just the maximum delivered flow.
- Start/stop operation described
- Pressure-holding duty described
- First, second and fourth quadrant use
- Through-drive option subject to configuration
PRANCE HYDRAULIC · PRODUCT SERIES
Axial piston; variable displacement · Confirm the required quadrant and hydraulic circuit
The A10VZO variable pump is listed for start/stop, pressure-holding and multiple-quadrant operation. Its selection should therefore include how the drive behaves during decompression and energy return, not just the maximum delivered flow.
Model

Confirm the complete model and approved specification with Prance Hydraulic. Product-series references alone do not establish interchangeability.
Configuration review · Technical documentation · Product selection
تفاصيل المنتج
- Start/stop operation described
- Pressure-holding duty described
- First, second and fourth quadrant use
- Through-drive option subject to configuration
CATEGORIES: مضخة مكبسية, مضخة ذات إزاحة متغيرة
A10VZO Features & Application
Start/stop operation described
Specify the full MS order code, installation drawing and operating duty so the quotation can identify the proposed configuration.
Pressure-holding duty described
Keep continuous, intermittent and peak conditions separate. Use the row for the selected size and configuration.
First, second and fourth quadrant use
Compare the required flow at the actual drive speed and pressure. Check the selected variant rather than combining maxima from different rows.
Through-drive option subject to configuration
Review combined drive torque and simultaneous demand, including any additional pump connected to the drive.
A10VZO Specifications
| Series / model | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits |
|---|---|
| Product type | A10VZO Variable Speed Axial Piston Pump |
| تصميم | Axial piston; variable displacement |
| Circuit / selection | Confirm the required quadrant and hydraulic circuit |
| Published nominal sizes | 3, 6, 8, 10, 18, 28 and 45 |
| Listed maximum geometric displacement | 3.5, 6, 8, 10.5, 18, 28 and 45 cm³/rev |
A10VZO Selection & Configuration
The A10VZO variable pump is listed for start/stop, pressure-holding and multiple-quadrant operation. Its selection should therefore include how the drive behaves during decompression and energy return, not just the maximum delivered flow.
Define the operating quadrants with the drive supplier and identify when hydraulic energy can return to the electric drive. Check lubrication, inlet pressure, control settings and the permitted speed-pressure envelope in each operating state.

Your Application.
The Right Configuration.
Hydraulic pumps · Hydraulic motors · Hydraulic valves
Send the MS nameplate, operating requirements and installation drawing for a configuration review before quoting.
- Model review — send the full model code or an existing nameplate photograph.
- Interface matching — confirm shaft, mounting flange, rotation and ports.
- Operating conditions — provide flow, pressure, speed, fluid and duty cycle.
- Documentation — request the relevant product data and drawings for your review.

A10VZO Buying Guide
Use this sequence to prepare the A10VZO configuration for review and quotation.
- Define required flow at the actual drive speed and continuous pressure.
- Identify peak pressure, duration and the work cycle.
- Confirm the selected displacement control and any auxiliary-drive requirement.
- Match rotation viewed from the shaft end, shaft, flange and ports.
- Review inlet conditions, drain routing and the installation envelope.
- Confirm fluid, viscosity, temperature, filtration and seals.
- Approve the complete model, control, drawing, quantity and delivery terms.

Selection, Documentation & Project Support

Selection Support
Learn more →Share your hydraulic circuit, operating point and installation requirements for a configuration discussion.
Flow · Pressure · Speed · Interfaces

Technical Resources
Learn more →Review product documentation, model codes and technical data before finalizing the specification.
Datasheets · Model codes · Drawings

Project Inquiries
Learn more →Send your required model, quantity, application and project requirements to discuss your inquiry.
Product inquiries · Configuration review
Configuration, Quantity & Delivery
Confirm the complete MS code, approved drawing and operating limits. Availability, quantity, documentation and delivery date are confirmed in the quotation.
Discuss Your A10VZO Application
Send the full model code, operating duty, installation details and quantity.
Request a A10VZO QuotationA10VZO Questions Before Ordering
What type of product is the A10VZO?
A10VZO Variable Speed Axial Piston Pump. Design: Axial piston; variable displacement. Confirm the required quadrant and hydraulic circuit. Confirm the complete order code for the offered version.
Can a similar pump replace the A10VZO?
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
Define required flow at the actual drive speed and continuous pressure. Identify peak pressure, duration and the work cycle. Attach the nameplate, complete order code, installation drawing and required quantity.
A10VZO Technical Data & Documents
View A10VZO catalog data and operating conditions
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
Technical data A10VZO size 3 to 45
| حجم | غير مقبول | 3 | 6 | 8 | 10 | 18 | 28 | 45 | ||
| Displacement, geometric,per revolution | Vg الحد الأقصى | سم3 | 3.5 | 6 | 8 | 10.5 | 18 | 28 | 45 | |
| Rotational speed maximum1) | عند Vجي ماكس | |||||||||
| Suction speed operation as a pump1) | nالاسمية | دورة في الدقيقة | 3600 | 3600 | 3600 | 3600 | 3300 | 3000 | 3000 | |
| Max. speed decompression operation2) | nالاسمية | دورة في الدقيقة | 3600 | 3600 | 3600 | 3600 | 3300 | 3000 | 3000 | |
| Power Operation as a pump at nالاسمية,Vg max | و Δp = 250 بار | P | كيلوواط | 5 | 10 | 15 | 16 | – | – | – |
| and Δp = 315 bar | P | كيلوواط | – | – | – | – | 34 | 39 | 44 | |
| عزم الدوران | عند Vجي ماكس و Δp = 250 بار | T | لا شيء جديد | 14 | 24 | 32 | 42 | – | – | – |
| عند Vجي ماكس and Δp = 315 bar | T | لا شيء جديد | – | – | – | – | 90 | 140 | 225 | |
| عند Vجي ماكس و Δp = 100 بار | T | لا شيء جديد | 6 | 9 | 13 | 17 | 29 | 140 | 225 | |
| Rotary stiffness of drive shaft | S | c | نيوتن متر/راديان | 8100 | 8100 | 8100 | 8100 | – | – | – |
| R | c | نيوتن متر/راديان | – | – | – | – | 14800 | 26300 | 41000 | |
| عزم القصور الذاتي للمجموعة الدوارة | JTW | كجم.م2 | 0.0006 | 0.0006 | 0.0006 | 0.0006 | 0.00093 | 0.0017 | 0.0033 | |
| التسارع الزاوي الأقصى2)3) | α | راديان/ثانية2 | 14000 | 14000 | 14000 | 14000 | 12600 | 11200 | 9500 | |
| حجم الحالة | V | L | 0.2 | 0.2 | 0.2 | 0.2 | 0.25 | 0.3 | 1.0 | |
| Weight without through drive (14N00, 12N00 approx.) | m | kg | 8 | 8 | 8 | 8 | 12 | 15 | 27 | |
| Weight without through drive (22U00 approx.) | m | kg | – | – | – | – | – | – | – | |
| Weight with through drive (07K.., 12K..approx.) | m | kg | 10.5 | 10.5 | 10.5 | 10.5 | 14 | 18 | 28 | |
| Weight with through drive (22U..approx.) | m | kg | – | – | – | – | – | – | – | |
تحديد خصائص التشغيل
مفتاح
Vg الإزاحة لكل دورة في [سم3] Δp Differential pressure [bar] n Rotational speed [rpm] ηv Volumetric efficiency ηhm Hydraulic-mechanical efficiency ηt الكفاءة الكلية (ηt= ηv*ηhm) 1)The values are applicable: – At absolute pressure Pabs = 1 bar at suction port S – For the optimal viscosity range of vاختيار = 36 إلى 16 ملم2/s – For hydraulic fluid based on mineral oils 2)Higher values on request 3) The limit value is only valid for a single pump, multiple pump version available on request. The load capacity of the connecting parts must be considered.Technical data A10VZO size 71 to 180
| حجم | غير مقبول | 71 | 100 | 140 | 180 | ||
| Displacement, geometric,per revolution | Vg الحد الأقصى | سم3 | 71.1 | 100 | 140 | 180 | |
| Rotational speed maximum1) | عند Vجي ماكس | ||||||
| Suction speed operation as a pump1) | nالاسمية | دورة في الدقيقة | 2550 | 2300 | 2200 | 1800 | |
| Max. speed decompression operation2) | nالاسمية | دورة في الدقيقة | On request | ||||
| عزم الدوران | عند Vجي ماكس and Δp = 280 bar | T | لا شيء جديد | 317 | 445 | 623 | 801 |
| عند Vجي ماكس و Δp = 100 بار | T | لا شيء جديد | 113 | 159 | 223 | 286 | |
| Rotary stiffness of drive shaft | S | c | نيوتن متر/راديان | 8100 | 8100 | 8100 | 8100 |
| R | c | نيوتن متر/راديان | – | 121142 | 169537 | 171107 | |
| عزم القصور الذاتي للمجموعة الدوارة | JTW | كجم.م2 | 0.0087 | 0.0185 | 0.0276 | 0.033 | |
| التسارع الزاوي الأقصى2)3) | α | راديان/ثانية2 | 7500 | 6200 | 5000 | 4000 | |
| حجم الحالة | V | L | 1.6 | 2.2 | 3.0 | 2.7 | |
| Weight without through drive (12N00, 42N00 approx.) | m | kg | 36.5 | 55 | 70 | – | |
| Weight without through drive (22U00 approx.) | m | kg | 47 | 69 | 73 | 78 | |
| Weight with through drive (12K..approx.) | m | kg | – | – | – | – | |
| Weight with through drive (22U..approx.) | m | kg | 47 | 69 | 73 | 78 | |
تحديد خصائص التشغيل
مفتاح
Vg الإزاحة لكل دورة في [سم3] Δp Differential pressure [bar] n Rotational speed [rpm] ηv Volumetric efficiency ηhm Hydraulic-mechanical efficiency ηt الكفاءة الكلية (ηt= ηv*ηhm) 1)The values are applicable: – At absolute pressure Pabs = 1 bar at suction port S – For the optimal viscosity range of vاختيار = 36 إلى 16 ملم2/s – For hydraulic fluid based on mineral oils 2)Higher values on request 3) The limit value is only valid for a single pump, multiple pump version available on request. The load capacity of the connecting parts must be considered. 4) With port plates 7 or 14عزم الإدخال والعزم المسموح بهما للقيادة عبر
| حجم | 003 to 10 | 18 | 28 | 45 | 71 | 100 | 140 | 180 | |||
| عزم الدوران الإدخالي | |||||||||||
| at drive shaft, maximum2) | S | TE max | لا شيء جديد | 126 | – | – | – | – | 1104 | 1620 | 1620 |
| ∅ | in | 3/4 | – | – | – | – | 1 1/2 | 1 3/4 | 1 3/4 | ||
| R | TE max | لا شيء جديد | – | 160 | 250 | 400 | 650 | – | – | – | |
| ∅ | in | – | 3/4 | 7/8 | 1 | 1 1/4 | – | – | – | ||
| Maximum through- drive torque | S | TD max | لا شيء جديد | 41 | – | – | – | – | 778 | 1266 | 1266 |
| R | TD max | لا شيء جديد | – | 92 | 127 | 229 | 480 | – | – | – | |
توزيع عزم الدوران
| عزم الدوران الإدخالي | TE=T1+T2+T3 |
| TE < TE max | |
| Through-drive torque | TD=T2+T3 |
| TD < TD max |
Watch A10VZO Product Video
Related Selection Resources
Request a A10VZO Quotation
أخبرنا بالتكوين المطلوب، الكمية والتطبيق.
Type code A10VZ0
| 01 | 02 | 03 | 04 | 05 | 06 | 07 | 08 | 09 | 10 | 11 | 12 | 13 | ||
| A10V | Z | ○ | / | 10 | - | V | C | N00 |
وحدة كباس محوري
| 01 | Swashplate design, variable | A10V |
Application area
| 02 | Variable-speed drives | Z |
نمط التشغيل
| 03 | مضخة، الدائرة المفتوحة | ○ |
الحجم (نيجيريا)
| 04 | Geometric displacement, see table of values on page 10 | 010 | 018 | 028 | 045 | 071 | 100 | 140 | 180 |
| Other available intermediate sizes | 003,006,008 |
جهاز تحكم
| 05 | Two-point control | كهربائي | الجهد = 12 فولت | ● | ● | ● | ● | ○ | ○ | ○ | ○ | EZ3001) |
| الجهد = 24 فولت | ● | ● | ● | ● | ○ | ○ | ○ | ○ | EZ4001) | |||
| هيدروليكي | ● | ● | ● | ● | ○ | ○ | ○ | ○ | DGO001) | |||
| منظم الضغط | هيدروليكي | ● | ● | ● | ● | ○ | ○ | ○ | ○ | DRO00 | ||
| remote controlled hydraulically | ● | ● | ● | ● | ○ | ○ | ○ | ○ | DRGO0 | |||
| Torque controller | Size 018 to 180 | |||||||||||
| بداية التحكم |
up to 50 bar |
- | ● | ● | ● | ○ | ○ | ○ | ○ | LA5D0 | ||
|
من 51 إلى 90 بار |
- | ● | ● | ● | ○ | ○ | ○ | ○ | LA6D0 | |||
|
من 91 إلى 160 بار |
- | ● | ● | ● | ○ | ○ | ○ | ○ | LA7D0 | |||
|
من 161 إلى 240 بار |
- | ● | ● | ● | ○ | ○ | ○ | ○ | LA8D0 | |||
|
over 240 bar |
- | ● | ● | ● | ○ | ○ | ○ | ○ | LA9D0 | |||
مسلسل
| 06 | Series 1, index 0 | ● |
اتجاه الدوران2)
| 07 | تمت معاينته على عمود الدوران | مع عقارب الساعة | R |
| عكس عقارب الساعة | L |
مادة مانعة للتسرب
| 08 | FKM (إيلاستومر فلوري) | V |
عمود الدوران
| 09 | عمود مسنن
ANSI B92.1a |
عمود قياسي | ● | - | - | - | - | ○ | ○ | ○ | S |
| مشابه للعمود "S" ولكن لعزم دوران أدخل أعلى | - | ● | ● | ● | ○ | - | - | - | R |
شفة التركيب
| 10 | آي إس أو 3019-1 (إس إيه إي) | ثقبان | ● | ● | ● | - | - | - | - | - | C |
| ذو 4 ثقوب | - | - | - | ● | ○ | ○ | ○ | ○ | D |
1) Please specify mechanical flow control Vجي ماكس و Vج مين in the order text.
2)Changing direction of rotation permissible with the same pressure side for decompression
منفذ عامل3)
| 003 to 010 | 018 | 028 | 045 | 071 | 100 | 140 | 180 | |||
| 11 | SAE flange ports at top and bottom, on opposite sides, metric fastening thread with universal through drive | - | - | - | - | ○ | ○ | ○ | ○ | 22U5) |
| SAE flange ports at top and bottom, on opposite sides, metric fastening thread | - | ● | ● | ● | ○ | ○ | ○ | - | 123)5) | |
| DIN 3852 threaded ports at rear, not for through drive | ● | - | - | - | - | - | - | - | 14 | |
| DIN 3852 threaded ports on opposite side, only for through drive | ● | - | - | - | - | - | - | - | 07 |
من خلال القيادة
| 003 to 010 | 018 | 028 | 045 | 071 | 100 | 140 | 180 | ||||||
| 12 | With through-drive shaft, without hub, without intermediate flange;
fastening thread metric, with universal through drive, only port plate 22U |
- | - | - | - | ○ | ○ | ○ | ○ | 004)5) | |||
| Without through drive, only port plates 12 and 14 | ● | ● | ● | ● | ○ | ○ | ○ | ○ | N00 | ||||
| Port plate 12 and 07 | |||||||||||||
| شفة ISO 3019-1 | سرّة لعمود مسنن6)
قطر |
||||||||||||
| قطر | التركيب7) | ||||||||||||
| ٢-٨٢ (أ) | نصف بوصة | 9T 16/32DP | ● | ● | ● | ● | - | - | - | - | K01 | ||
| ٣/٤ بوصة | 11 سن 16/32DP | ● | ● | ● | ● | - | - | - | - | K52 | |||
| 101-2(ب) | 7/8 in | 13 سن 16/32DP | - | - | ● | ● | - | - | - | - | K68 | ||
| ١ بوصة | 15T 16/32DP | - | - | - | ● | - | - | - | - | K04 | |||
| Port plate 22U | |||||||||||||
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | سرّة لعمود مسنن6)
قطر |
||||||||||||
| قطر | |||||||||||||
| ٢-٨٢ (أ) | ٥/٨ بوصة | 9T 16/32DP | - | - | - | - | ○ | ○ | ○ | ○ | 01 | ||
| ٣/٤ بوصة | 11 سن 16/32DP | - | - | - | - | ○ | ○ | ○ | ○ | 52 | |||
| 101-2(ب) | 7/8 in | 13 سن 16/32DP | - | - | - | - | ○ | ○ | ○ | ○ | 68 | ||
| ١ بوصة | 15T 16/32DP | - | - | - | - | ○ | ○ | ○ | ○ | 04 | |||
| ١ وربع بوصة | 14 سن 12/24 دي بي | - | - | - | - | ○ | ○ | ○ | ○ | 06 | |||
| 127-4 (C) | ١ بوصة | 15T 16/32DP | - | - | - | - | ○ | ○ | ○ | ○ | E2 | ||
| ١ وربع بوصة | 14 سن 12/24 دي بي | - | - | - | - | ○ | ○ | ○ | ○ | 15 | |||
| 152-4 (D) | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | 17 سن 12/24DP | - | - | - | - | - | ○ | ○ | ○ | 96 | ||
| 1 3/4 بوصة | 13 سن 8/16DP | - | - | - | - | - | ○ | ○ | ○ | 17 | |||
موصلات الملفات اللولبية
| 13 | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | 0 |
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | H |
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
Vg الحد الأقصىcURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limitsجي ماكس إلى 50% Vg الحد الأقصى بدون درجات
Vg الحد الأدنىcURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limitsج مين to 40% Vجي ماكس stepless,settings to be specified in plain text.
Vg الحد الأقصى و Vg الحد الأدنى limitations on through drives with port plates 12K..and 22U..can only be carried out via fixed set values, this should also be specified in plain text.
4)See data sheet 95581 universal through drive
5)When ordering sizes 071 to 180 with port plate 22, please order the relevant through drive "U"
Example: A10VZO045DR000/10R-VSD22U01
When ordering sizes 018 to 045 with port plate 12, please order the relevant through drive with "K"
Example: A10VZ0018DR000/10R-VSD12K01
6)Splined shaft according to ANSI B92.1a (splined shafts according to SAE J744)
7) Mounting holes pattern viewed on through drive with control at top
Technical data A10VZO size 3 to 45
| حجم | غير مقبول | 3 | 6 | 8 | 10 | 18 | 28 | 45 | ||
| Displacement, geometric,per revolution | Vg الحد الأقصى | سم3 | 3.5 | 6 | 8 | 10.5 | 18 | 28 | 45 | |
| سرعة الدوران
الحد الأقصى1) |
عند Vجي ماكس | |||||||||
| Suction speed operation as a pump1) | nالاسمية | دورة في الدقيقة | 3600 | 3600 | 3600 | 3600 | 3300 | 3000 | 3000 | |
| Max. speed decompression operation2) | nالاسمية | دورة في الدقيقة | 3600 | 3600 | 3600 | 3600 | 3300 | 3000 | 3000 | |
| تدفق | عند nالاسمية و Vg max | qv | لتر/دقيقة | 12.6 | 21.6 | 28.8 | 38 | 59 | 84 | 135 |
| طاقة
Operation as a pump عند nالاسمية,Vg max |
و Δp = 250 بار | P | كيلوواط | 5 | 10 | 15 | 16 | - | - | - |
| and Δp = 315 bar | P | كيلوواط | - | - | - | - | 34 | 39 | 44 | |
| عزم الدوران | عند Vجي ماكس و Δp = 250 بار | T | لا شيء جديد | 14 | 24 | 32 | 42 | - | - | - |
| عند Vجي ماكس and Δp = 315 bar | T | لا شيء جديد | - | - | - | - | 90 | 140 | 225 | |
| عند Vجي ماكس و Δp = 100 بار | T | لا شيء جديد | 6 | 9 | 13 | 17 | 29 | 140 | 225 | |
| Rotary stiffness of
drive shaft |
S | c | نيوتن متر/راديان | 8100 | 8100 | 8100 | 8100 | - | - | - |
| R | c | نيوتن متر/راديان | - | - | - | - | 14800 | 26300 | 41000 | |
| عزم القصور الذاتي للمجموعة الدوارة | JTW | كجم.م2 | 0.0006 | 0.0006 | 0.0006 | 0.0006 | 0.00093 | 0.0017 | 0.0033 | |
| التسارع الزاوي الأقصى2)3) | α | راديان/ثانية2 | 14000 | 14000 | 14000 | 14000 | 12600 | 11200 | 9500 | |
| حجم الحالة | V | L | 0.2 | 0.2 | 0.2 | 0.2 | 0.25 | 0.3 | 1.0 | |
| Weight without through drive (14N00, 12N00 approx.) | m | kg | 8 | 8 | 8 | 8 | 12 | 15 | 27 | |
| Weight without through drive (22U00 approx.) | m | kg | - | - | - | - | - | - | - | |
| Weight with through drive (07K.., 12K..approx.) | m | kg | 10.5 | 10.5 | 10.5 | 10.5 | 14 | 18 | 28 | |
| Weight with through drive (22U..approx.) | m | kg | - | - | - | - | - | - | - | |
تحديد خصائص التشغيل
| تدفق | qv=(Vg ∙ n ∙ ηv) / 1000 | لتر/دقيقة |
| عزم الدوران | م = (فg ∙ Δp) / (20 ∙ π ∙ ηhm) | لا شيء جديد |
| طاقة | P = (2π ∙ م ∙ ن) / 60000 = (qv ∙ Δp) / (600 ∙ ηt) | كيلوواط |
مفتاح
Vg الإزاحة لكل دورة في [سم3]
Δp ضغط تفاضلي [بار]
ن سرعة الدوران [دورة في الدقيقة]
ηv الكفاءة الحجمية
ηhm الكفاءة الهيدروليكية الميكانيكية
ηt الكفاءة الكلية (ηt= ηv*ηhm)
1)القيم قابلة للتطبيق:
- At absolute pressure Pabs = 1 bar at suction port S
- For the optimal viscosity range of vاختيار = 36 إلى 16 ملم2/s
- For hydraulic fluid based on mineral oils
2)Higher values on request
3) The limit value is only valid for a single pump, multiple pump version available on request. The load capacity of the connecting parts must be considered.
Technical data A10VZO size 71 to 180
| حجم | غير مقبول | 71 | 100 | 140 | 180 | ||
| Displacement, geometric,per revolution | Vg الحد الأقصى | سم3 | 71.1 | 100 | 140 | 180 | |
| سرعة الدوران
الحد الأقصى1) |
عند Vجي ماكس | ||||||
| Suction speed operation as a pump1) | nالاسمية | دورة في الدقيقة | 2550 | 2300 | 2200 | 1800 | |
| Max. speed decompression operation2) | nالاسمية | دورة في الدقيقة | On request | ||||
| تدفق | عند nالاسمية و Vg max | qv | لتر/دقيقة | 181 | 230 | 308 | 324 |
| طاقة
Operation as a pump عند nالاسمية,Vg max |
and Δp = 280 bar
|
P
|
كيلوواط
|
84 | 107 | 143 | 151 |
| عزم الدوران | عند Vجي ماكس and Δp = 280 bar | T | لا شيء جديد | 317 | 445 | 623 | 801 |
| عند Vجي ماكس و Δp = 100 بار | T | لا شيء جديد | 113 | 159 | 223 | 286 | |
| Rotary stiffness of
drive shaft |
S | c | نيوتن متر/راديان | 8100 | 8100 | 8100 | 8100 |
| R | c | نيوتن متر/راديان | - | 121142 | 169537 | 171107 | |
| عزم القصور الذاتي للمجموعة الدوارة | JTW | كجم.م2 | 0.0087 | 0.0185 | 0.0276 | 0.033 | |
| التسارع الزاوي الأقصى2)3) | α | راديان/ثانية2 | 7500 | 6200 | 5000 | 4000 | |
| حجم الحالة | V | L | 1.6 | 2.2 | 3.0 | 2.7 | |
| Weight without through drive (12N00, 42N00 approx.) | m | kg | 36.5 | 55 | 70 | - | |
| Weight without through drive (22U00 approx.) | m | kg | 47 | 69 | 73 | 78 | |
| Weight with through drive (12K..approx.) | m | kg | - | - | - | - | |
| Weight with through drive (22U..approx.) | m | kg | 47 | 69 | 73 | 78 | |
تحديد خصائص التشغيل
| تدفق | qv=(Vg ∙ n ∙ ηv) / 1000 | لتر/دقيقة |
| عزم الدوران | T=(Vg ∙ Δp) / (20 ∙ π ∙ ηhm) | لا شيء جديد |
| طاقة | P=(2π ∙ T ∙ n)/60000=(qv ∙ Δp) / (600 ∙ ηt) | كيلوواط |
مفتاح
Vg الإزاحة لكل دورة في [سم3]
Δp ضغط تفاضلي [بار]
ن سرعة الدوران [دورة في الدقيقة]
ηv الكفاءة الحجمية
ηhm الكفاءة الهيدروليكية الميكانيكية
ηt الكفاءة الكلية (ηt= ηv*ηhm)
1)القيم قابلة للتطبيق:
- At absolute pressure Pabs = 1 bar at suction port S
- For the optimal viscosity range of vاختيار = 36 إلى 16 ملم2/s
- For hydraulic fluid based on mineral oils
2)Higher values on request
3) The limit value is only valid for a single pump, multiple pump version available on request. The load capacity of the connecting parts must be considered.
4) With port plates 7 or 14
عزم الإدخال والعزم المسموح بهما للقيادة عبر
| حجم | 003 to 10 | 18 | 28 | 45 | 71 | 100 | 140 | 180 | |||
| عزم الدوران الإدخالي | |||||||||||
| at drive shaft, maximum2) |
S | TE max | لا شيء جديد | 126 | - | - | - | - | 1104 | 1620 | 1620 |
| ∅ | in | 3/4 | - | - | - | - | 1 1/2 | 1 3/4 | 1 3/4 | ||
| R | TE max | لا شيء جديد | - | 160 | 250 | 400 | 650 | - | - | - | |
| ∅ | in | - | 3/4 | 7/8 | 1 | 1 1/4 | - | - | - | ||
| Maximum through- drive torque |
S | TD max | لا شيء جديد | 41 | - | - | - | - | 778 | 1266 | 1266 |
| R | TD max | لا شيء جديد | - | 92 | 127 | 229 | 480 | - | - | - | |
توزيع عزم الدوران

| عزم الدوران عند المضخة الأولى | T1 |
| عزم الدوران عند المضخة الثانية | T2 |
| عزم الدوران عند المضخة الثالثة | T3 |
| عزم الدوران الإدخالي | TE=T1+T2+T3 |
| TE < TE max | |
| Through-drive torque | TD=T2+T3 |
| TD < TD max |
1)الكفاءة غير محسوبة
2) لأعمدة القيادة بدون قوة شعاعية







-2.webp)