شركة ونزهو برانس للمعدات الهيدروليكية المحدودة
A10VO Series 31 Variable Piston Pump
The A10VO Series 31 variable displacement pump is listed for open-circuit systems. The technical data also distinguishes mechanical displacement-limit options and through-drive versions, so those details should be included in the specification.
- Series 31 pump identification
- Open-circuit variable flow
- Mounting and port standards require code matching
- Displacement limiter depends on the version
PRANCE HYDRAULIC · PRODUCT SERIES
Axial piston; variable swashplate · Open circuit
The A10VO Series 31 variable displacement pump is listed for open-circuit systems. The technical data also distinguishes mechanical displacement-limit options and through-drive versions, so those details should be included in the specification.
Model
-2.webp)
Confirm the complete model and approved specification with Prance Hydraulic. Product-series references alone do not establish interchangeability.
Configuration review · Technical documentation · Product selection
تفاصيل المنتج
- Series 31 pump identification
- Open-circuit variable flow
- Mounting and port standards require code matching
- Displacement limiter depends on the version
CATEGORIES: مضخة مكبسية, مضخة ذات إزاحة متغيرة
A10VO Series 31 Features & Application
Series 31 pump identification
Include the series and all order-code suffixes in the enquiry. A common nominal size does not establish compatibility.
Open-circuit variable flow
Specify the displacement range or switching arrangement and verify performance at each required setting.
Mounting and port standards require code matching
Check pilot diameter, bolt pattern, shaft engagement or port pattern against the approved installation drawing.
Displacement limiter depends on the version
Specify the full A17FO Series 10 order code, installation drawing and operating duty so the quotation can identify the proposed configuration.
A10VO Series 31 Specifications
| Series / model | A10VO Series 31 |
|---|---|
| Product type | A10VO Series 31 Variable Piston Pump |
| تصميم | Axial piston; variable swashplate |
| Circuit / selection | Open circuit |
| Published nominal sizes | 18, 28, 45, 71, 100 and 140 |
| Listed nominal outlet pressure | 280 bar; confirm exact model and duty |
| Listed peak outlet pressure | 350 bar; not a continuous rating |
A10VO Series 31 Selection & Configuration
The A10VO Series 31 variable displacement pump is listed for open-circuit systems. The technical data also distinguishes mechanical displacement-limit options and through-drive versions, so those details should be included in the specification.
For a replacement, record the complete Series 31 code and control settings before removal. Confirm whether displacement limitation is required and whether a through drive is present. Do not assume a similar Series 32 or 53 unit has the same installation or controller response.
-1.webp)
Your Application.
The Right Configuration.
Hydraulic pumps · Hydraulic motors · Hydraulic valves
Send the A17FO Series 10 nameplate, operating requirements and installation drawing for a configuration review before quoting.
- Model review — send the full model code or an existing nameplate photograph.
- Interface matching — confirm shaft, mounting flange, rotation and ports.
- Operating conditions — provide flow, pressure, speed, fluid and duty cycle.
- Documentation — request the relevant product data and drawings for your review.

A10VO Series 31 Buying Guide
Use this sequence to prepare the A10VO Series 53 configuration for review and quotation.
- Define required flow at the actual drive speed and continuous pressure.
- Identify peak pressure, duration and the work cycle.
- Confirm the selected displacement control and any auxiliary-drive requirement.
- Match rotation viewed from the shaft end, shaft, flange and ports.
- Review inlet conditions, drain routing and the installation envelope.
- Confirm fluid, viscosity, temperature, filtration and seals.
- Approve the complete model, control, drawing, quantity and delivery terms.
-5.webp)
Selection, Documentation & Project Support

Selection Support
Learn more →Share your hydraulic circuit, operating point and installation requirements for a configuration discussion.
Flow · Pressure · Speed · Interfaces

Technical Resources
Learn more →Review product documentation, model codes and technical data before finalizing the specification.
Datasheets · Model codes · Drawings

Project Inquiries
Learn more →Send your required model, quantity, application and project requirements to discuss your inquiry.
Product inquiries · Configuration review
Configuration, Quantity & Delivery
Confirm the complete A17FO Series 10 code, approved drawing and operating limits. Availability, quantity, documentation and delivery date are confirmed in the quotation.
Discuss Your A10VO Series 31 Application
Send the full model code, operating duty, installation details and quantity.
Request a A10VO Series 31 QuotationA10VO Series 31 Questions Before Ordering
What type of product is the A10VO Series 31?
A10VO Series 31 Variable Piston Pump. Design: Axial piston; variable swashplate. Open circuit. Confirm the complete order code for the offered version.
Can a similar pump replace the A10VO Series 31?
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
Define required flow at the actual drive speed and continuous pressure. Identify peak pressure, duration and the work cycle. Attach the nameplate, complete order code, installation drawing and required quantity.
A10VO Series 31 Technical Data & Documents
View A10VO Series 31 catalog data and operating conditions
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
البيانات الفنية
محدد الإزاحة الميكانيكي
محدد الإزاحة الميكانيكية ممكن في طراز عدم المرور، سلسلة NOO، ولكنه غير متاح للطراز ذي المرور.جي ماكس: for sizes i 8 to 140 Setting range Vجي ماكس إلى 50%Vجي ماكس stepless Vج مين: for sizes 100 and 140 Setting range Vج مين إلى 50% Vg mفأس بدون درجاتمعامل
Operating pressure range -inlet Absolute pressure at port S Pabsmin——————–0.8 bar Pabsالحد الأقصى——————–30 bar Operating pressure range-outlet Pressure at port B Nominal pressure PN———–280 bar Peak pressure Pماx———–350bar Applications with intermittent operating pressures up to 315 bar at 10% duty are permitted.ضغط تصريف العلبة
الضغط الأقصى المسموح به لسائل التسرب (عند المنفذ L, L): بحد أقصى 0.5 بار أعلى من ضغط الدخول عند المنفذ S، ولكن ليس أعلى من 2 بار ضغط مطلق.| الأحجام | 18 | 28 | 45 | 71 | 100 | 140 | |||
| إزاحة | Vgmax سم3 | 18 | 28 | 45 | 71 | 100 | 140 | ||
| السرعة القصوى | nالحد الأقصى دورة في الدقيقة | 3300 | 3000 | 2600 | 2200 | 2000 | 1800 | ||
| الحد الأقصى للتدفق | فيالحد الأقصى | qv | لتر/دقيقة | 59.4 | 84 | 117 | 156 | 200 | 252 |
| بسرعة 1500 دورة في الدقيقة | 27 | 42 | 68 | 107 | 150 | 210 | |||
| (Δp=280bar) Max.power | فيالحد الأقصى | Pالحد الأقصى | الكويت | 27.7 | 39 | 55 | 73 | 93 | 118 |
| بسرعة 1500 دورة في الدقيقة | 12.6 | 20 | 32 | 50 | 70 | 98 | |||
| (4p=280bar) Max.torque | في Vgmax | تي ماكس | لا شيء جديد | 80.1 | 125 | 200 | 316 | 445 | 623 |
| الوزن | m | كيلوغرام | 12 | 15 | 21 | 33 | 45 | 60 | |
علاقات المعلمات
| طاقة القيادة | P=(T ∙ n)/9549=(2π ∙ T ∙ n)/60000=(qv ∙ Δp)/600 ∙ ηt | كيلوواط |
Watch A10VO Series 31 Product Video
Related Selection Resources
Request a A10VO Series 31 Quotation
أخبرنا بالتكوين المطلوب، الكمية والتطبيق.
البيانات الفنية
محدد الإزاحة الميكانيكي
محدد الإزاحة الميكانيكية ممكن في طراز عدم المرور، سلسلة NOO، ولكنه غير متاح للطراز ذي المرور.
Vجي ماكس: للأحجام من 8 إلى 140
نطاق الضبط Vجي ماكس إلى 50%Vجي ماكس بدون درجات
Vج مين: للمقاسات 100 و140
نطاق الضبط Vج مين إلى 50% Vg mفأس بدون درجات
معامل
نطاق ضغط التشغيل - المدخل
الضغط المطلق عند المنفذ S
Pabsmin٠٫٨ بار
Pabsالحد الأقصى--------------------30 بار
نطاق ضغط التشغيل - المخرج
الضغط عند المنفذ B
الضغط الاسمي PN-----------280 بار
الضغط الأقصى Pماx-----------350 بار
التطبيقات التي تتسم بضغوط تشغيل متقطعة تصل إلى
يُسمح بضغط يبلغ 315 بار عند نظام التشغيل 10%.
ضغط تصريف العلبة
الضغط الأقصى المسموح به لسائل التسرب (عند المنفذ L, L): بحد أقصى 0.5 بار أعلى من ضغط الدخول عند المنفذ S، ولكن ليس أعلى من 2 بار ضغط مطلق.
| الأحجام | 18 | 28 | 45 | 71 | 100 | 140 | |||
| إزاحة | Vgmax سم3 | 18 | 28 | 45 | 71 | 100 | 140 | ||
| السرعة القصوى | nالحد الأقصى دورة في الدقيقة | 3300 | 3000 | 2600 | 2200 | 2000 | 1800 | ||
| الحد الأقصى للتدفق | فيالحد الأقصى | qv | لتر/دقيقة | 59.4 | 84 | 117 | 156 | 200 | 252 |
| بسرعة 1500 دورة في الدقيقة | 27 | 42 | 68 | 107 | 150 | 210 | |||
| (Δp=280 بار)
القدرة القصوى |
فيالحد الأقصى | Pالحد الأقصى | الكويت | 27.7 | 39 | 55 | 73 | 93 | 118 |
| بسرعة 1500 دورة في الدقيقة | 12.6 | 20 | 32 | 50 | 70 | 98 | |||
| (4p=280bar)
أقصى عزم دوران |
في Vgmax | تي ماكس | لا شيء جديد | 80.1 | 125 | 200 | 316 | 445 | 623 |
| الوزن | m | كيلوغرام | 12 | 15 | 21 | 33 | 45 | 60 | |
علاقات المعلمات
| تدفق | qv=(Vg ∙ n ∙ ηv) / 1000 | لتر/دقيقة |
| عزم الدوران المحرك | T=(١٫٥٩ ∙ Vg ∙ Δp) /100 ∙ ηمم =(Vg ∙ Δp)/20 ∙ π ∙ ηمم | لا شيء جديد |
| طاقة القيادة | P=(T ∙ n)/9549=(2π ∙ T ∙ n)/60000=(qv ∙ Δp)/600 ∙ ηt | كيلوواط |
Vg=[سم3إزاحة الشكل الهندسي مع كل دورة
Δp= [بار] هبوط/فرق الضغط
n= [دورة/دقيقة] السرعة الدورانية
ηv كفاءة الحجم
ηممالكفاءة الميكانيكية الهيدروليكية
ηt= الكفاءة الإجمالية

-3.webp)
-4.webp)
-6.webp)


-2-1.webp)
