Wenzhou Prance Hydraulic Equipment Co., Ltd
A10VO Series 31 Variable Piston Pump
The A10VO Series 31 variable displacement pump is listed for open-circuit systems. The technical data also distinguishes mechanical displacement-limit options and through-drive versions, so those details should be included in the specification.
- Series 31 pump identification
- Open-circuit variable flow
- Mounting and port standards require code matching
- Displacement limiter depends on the version
PRANCE HYDRAULIC · PRODUCT SERIES
Axial piston; variable swashplate · Open circuit
The A10VO Series 31 variable displacement pump is listed for open-circuit systems. The technical data also distinguishes mechanical displacement-limit options and through-drive versions, so those details should be included in the specification.
Modèle
-2.webp)
Confirm the complete model and approved specification with Prance Hydraulic. Product-series references alone do not establish interchangeability.
Étude de configuration · Documentation technique · Sélection de produits
Détails du produit
- Series 31 pump identification
- Open-circuit variable flow
- Mounting and port standards require code matching
- Displacement limiter depends on the version
CATÉGORIES : Pompe à piston, Pompe à cylindrée variable
A10VO Series 31 Features & Application
Series 31 pump identification
Include the series and all order-code suffixes in the enquiry. A common nominal size does not establish compatibility.
Open-circuit variable flow
Specify the displacement range or switching arrangement and verify performance at each required setting.
Mounting and port standards require code matching
Check pilot diameter, bolt pattern, shaft engagement or port pattern against the approved installation drawing.
Displacement limiter depends on the version
Specify the full A17FO Series 10 order code, installation drawing and operating duty so the quotation can identify the proposed configuration.
A10VO Series 31 Specifications
| Series / model | A10VO Series 31 |
|---|---|
| Product type | A10VO Series 31 Variable Piston Pump |
| Conception | Axial piston; variable swashplate |
| Circuit / selection | Circuit ouvert |
| Published nominal sizes | 18, 28, 45, 71, 100 and 140 |
| Listed nominal outlet pressure | 280 bar; confirm exact model and duty |
| Listed peak outlet pressure | 350 bar; not a continuous rating |
A10VO Series 31 Selection & Configuration
The A10VO Series 31 variable displacement pump is listed for open-circuit systems. The technical data also distinguishes mechanical displacement-limit options and through-drive versions, so those details should be included in the specification.
For a replacement, record the complete Series 31 code and control settings before removal. Confirm whether displacement limitation is required and whether a through drive is present. Do not assume a similar Series 32 or 53 unit has the same installation or controller response.
-1.webp)
Your Application.
The Right Configuration.
Hydraulic pumps · Hydraulic motors · Hydraulic valves
Send the A17FO Series 10 nameplate, operating requirements and installation drawing for a configuration review before quoting.
- Model review — send the full model code or an existing nameplate photograph.
- Interface matching — confirm shaft, mounting flange, rotation and ports.
- Operating conditions — provide flow, pressure, speed, fluid and duty cycle.
- Documentation — request the relevant product data and drawings for your review.

A10VO Series 31 Buying Guide
Use this sequence to prepare the A10VO Series 53 configuration for review and quotation.
- Define required flow at the actual drive speed and continuous pressure.
- Identify peak pressure, duration and the work cycle.
- Confirm the selected displacement control and any auxiliary-drive requirement.
- Match rotation viewed from the shaft end, shaft, flange and ports.
- Review inlet conditions, drain routing and the installation envelope.
- Confirm fluid, viscosity, temperature, filtration and seals.
- Approve the complete model, control, drawing, quantity and delivery terms.
-5.webp)
Selection, Documentation & Project Support

Selection Support
Learn more →Share your hydraulic circuit, operating point and installation requirements for a configuration discussion.
Flow · Pressure · Speed · Interfaces

Technical Resources
Learn more →Review product documentation, model codes and technical data before finalizing the specification.
Datasheets · Model codes · Drawings

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
Learn more →cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
Configuration, Quantity & Delivery
Confirm the complete A17FO Series 10 code, approved drawing and operating limits. Availability, quantity, documentation and delivery date are confirmed in the quotation.
Discuss Your A10VO Series 31 Application
Send the full model code, operating duty, installation details and quantity.
Request a A10VO Series 31 QuotationA10VO Series 31 Questions Before Ordering
What type of product is the A10VO Series 31?
A10VO Series 31 Variable Piston Pump. Design: Axial piston; variable swashplate. Open circuit. Confirm the complete order code for the offered version.
Can a similar pump replace the A10VO Series 31?
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
Define required flow at the actual drive speed and continuous pressure. Identify peak pressure, duration and the work cycle. Attach the nameplate, complete order code, installation drawing and required quantity.
A10VO Series 31 Technical Data & Documents
View A10VO Series 31 catalog data and operating conditions
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
Données techniques
Limiteur de déplacement mécanique
Un limiteur de déplacement mécanique est possible sur le modèle sans entraînement traversant, de la série NOO, mais pas pour le modèle avec entraînement traversant.Giga: for sizes i 8 to 140 Setting range VGiga vers 50%VGiga stepless Vsol mineur: for sizes 100 and 140 Setting range Vsol mineur vers 50% Vg mhache continuParamètre
Operating pressure range -inlet Absolute pressure at port S Pabsmin——————–0.8 bar Pabdosmax——————–30 bar Operating pressure range-outlet Pressure at port B Nominal pressure PN———–280 bar Peak pressure Pmonx———–350bar Applications with intermittent operating pressures up to 315 bar at 10% duty are permitted.Pression de drainage du carter
Pression maximale admissible du fluide de fuite (aux orifices L, L) : Maximum 0,5 bar supérieure à la pression d'entrée à l'orifice S, mais ne dépassant pas 2 bar en pression absolue.| Tailles | 18 | 28 | 45 | 71 | 100 | 140 | |||
| Déplacement | VGmax cm3 | 18 | 28 | 45 | 71 | 100 | 140 | ||
| Vitesse maximale | nmax tours par minute | 3300 | 3000 | 2600 | 2200 | 2000 | 1800 | ||
| Débit max. | dans nmax | qv | L/min | 59.4 | 84 | 117 | 156 | 200 | 252 |
| à 1500 tr/min | 27 | 42 | 68 | 107 | 150 | 210 | |||
| (Δp=280bar) Max.power | dans nmax | Pmax | Kw | 27.7 | 39 | 55 | 73 | 93 | 118 |
| à 1500 tr/min | 12.6 | 20 | 32 | 50 | 70 | 98 | |||
| (4p=280bar) Max.torque | au VGmax | Tmax | Rien | 80.1 | 125 | 200 | 316 | 445 | 623 |
| Poids | m | Kg | 12 | 15 | 21 | 33 | 45 | 60 | |
Relations de paramètres
| Puissance du moteur | P=(T ∙ n)/9549=(2π ∙ T ∙ n)/60000=(qv ∙ Δp)/600 ∙ ηt | kW |
Watch A10VO Series 31 Product Video
Related Selection Resources
Request a A10VO Series 31 Quotation
Tell us your required configuration, quantity and application.
Données techniques
Limiteur de déplacement mécanique
Un limiteur de déplacement mécanique est possible sur le modèle sans entraînement traversant, de la série NOO, mais pas pour le modèle avec entraînement traversant.
VGiga: pour les tailles de 8 à 140
Plage de réglage VGiga vers 50%VGiga continu
Vsol mineur: pour les tailles 100 et 140
Plage de réglage Vsol mineur vers 50% Vg mhache continu
Paramètre
Plage de pression de service - entrée
Pression absolue à l'orifice S
Pabsmin--------------------0,8 bar
Pabdosmax--------------------30 bars
Plage de pression de service - sortie
Pression à l'orifice B
Pression nominale PN-----------280 bars
Pression de crête Pmonx-----------350bar
Applications avec des pressions de service intermittentes allant jusqu'à
Une pression de 315 bars est autorisée pour un cycle de fonctionnement 10%.
Pression de drainage du carter
Pression maximale admissible du fluide de fuite (aux orifices L, L) : Maximum 0,5 bar supérieure à la pression d'entrée à l'orifice S, mais ne dépassant pas 2 bar en pression absolue.
| Tailles | 18 | 28 | 45 | 71 | 100 | 140 | |||
| Déplacement | VGmax cm3 | 18 | 28 | 45 | 71 | 100 | 140 | ||
| Vitesse maximale | nmax tours par minute | 3300 | 3000 | 2600 | 2200 | 2000 | 1800 | ||
| Débit max. | dans nmax | qv | L/min | 59.4 | 84 | 117 | 156 | 200 | 252 |
| à 1500 tr/min | 27 | 42 | 68 | 107 | 150 | 210 | |||
| (Δp = 280 bar)
Puissance max. |
dans nmax | Pmax | Kw | 27.7 | 39 | 55 | 73 | 93 | 118 |
| à 1500 tr/min | 12.6 | 20 | 32 | 50 | 70 | 98 | |||
| (4p=280bar)
Couple max |
au VGmax | Tmax | Rien | 80.1 | 125 | 200 | 316 | 445 | 623 |
| Poids | m | Kg | 12 | 15 | 21 | 33 | 45 | 60 | |
Relations de paramètres
| Flux | qv=(Vg ∙ n ∙ ηv) / 1000 | L/min |
| Couple moteur | T = (1,59 ∙ Vg ∙ Δp) /100 ∙ ηhm =(Vg ∙ Δp)/20 ∙ π ∙ ηhm | Rien |
| Puissance du moteur | P=(T ∙ n)/9549=(2π ∙ T ∙ n)/60000=(qv ∙ Δp)/600 ∙ ηt | kW |
Vg=[cm3Déplacement géométrique à chaque rotation
Δp= [bar] Chute de pression / différentiel de pression
n= [tr/min] Vitesse de rotation
ηv = Efficacité du cubage
ηhm= Efficacité mécanique-hydraulique
ηt= Efficacité globale

-3.webp)
-4.webp)
-6.webp)


-2-1.webp)
