شركة ونزهو برانس للمعدات الهيدروليكية المحدودة
A10VSO Series 52 Variable Piston Pump
The A10VSO Series 52 page covers an open-circuit variable displacement pump. Keep the Series 52 identity in the request and compare the exact control, shaft and ports; a Series 53 photograph or a similar displacement does not establish a replacement.
- Series 52 model reference
- Open-circuit swashplate pump
- Variable displacement flow
- Control and interface selection by full code
PRANCE HYDRAULIC · PRODUCT SERIES
Axial piston; variable swashplate · Open circuit
The A10VSO Series 52 page covers an open-circuit variable displacement pump. Keep the Series 52 identity in the request and compare the exact control, shaft and ports; a Series 53 photograph or a similar displacement does not establish a replacement.
Model
-2-1.webp)
Confirm the complete model and approved specification with Prance Hydraulic. Product-series references alone do not establish interchangeability.
Configuration review · Technical documentation · Product selection
تفاصيل المنتج
- Series 52 model reference
- Open-circuit swashplate pump
- Variable displacement flow
- Control and interface selection by full code
CATEGORIES: مضخة مكبسية, مضخة ذات إزاحة متغيرة
A10VSO Series 52 Features & Application
Series 52 model reference
Include the series and all order-code suffixes in the enquiry. A common nominal size does not establish compatibility.
Open-circuit swashplate pump
Review normal running, startup and reversal where applicable. The pressure and flow requirements can differ between operating states.
Variable displacement flow
Specify the displacement range or switching arrangement and verify performance at each required setting.
Control and interface selection by full code
Match the complete control option and its command requirements to the existing controller. Similar housings can use different control arrangements.
A10VSO Series 52 Specifications
| Series / model | A10VSO Series 52 |
|---|---|
| Product type | A10VSO Series 52 Variable Piston Pump |
| تصميم | Axial piston; variable swashplate |
| Circuit / selection | Open circuit |
| مسلسل | 52 |
| Published family nominal-size table | 10, 18, 28, 45, 60, 63, 72, 85 and 100; availability is configuration-specific |
A10VSO Series 52 Selection & Configuration
The A10VSO Series 52 page covers an open-circuit variable displacement pump. Keep the Series 52 identity in the request and compare the exact control, shaft and ports; a Series 53 photograph or a similar displacement does not establish a replacement.
Select the displacement from the required flow at the working speed and review the full pressure-duty cycle. Confirm which sizes and controls are offered for the exact A10VSO Series 52 code, rather than treating a combined series table as an availability list.
-6.webp)
Your Application.
The Right Configuration.
Hydraulic pumps · Hydraulic motors · Hydraulic valves
Send the A17FO Series 10 nameplate, operating requirements and installation drawing for a configuration review before quoting.
- Model review — send the full model code or an existing nameplate photograph.
- Interface matching — confirm shaft, mounting flange, rotation and ports.
- Operating conditions — provide flow, pressure, speed, fluid and duty cycle.
- Documentation — request the relevant product data and drawings for your review.

A10VSO Series 52 Buying Guide
Use this sequence to prepare the A10VSO Series 52 configuration for review and quotation.
- Define required flow at the actual drive speed and continuous pressure.
- Identify peak pressure, duration and the work cycle.
- Confirm the selected displacement control and any auxiliary-drive requirement.
- Match rotation viewed from the shaft end, shaft, flange and ports.
- Review inlet conditions, drain routing and the installation envelope.
- Confirm fluid, viscosity, temperature, filtration and seals.
- Approve the complete model, control, drawing, quantity and delivery terms.
-3.webp)
Selection, Documentation & Project Support

Selection Support
Learn more →Share your hydraulic circuit, operating point and installation requirements for a configuration discussion.
Flow · Pressure · Speed · Interfaces

Technical Resources
Learn more →Review product documentation, model codes and technical data before finalizing the specification.
Datasheets · Model codes · Drawings

Project Inquiries
Learn more →Send your required model, quantity, application and project requirements to discuss your inquiry.
Product inquiries · Configuration review
Configuration, Quantity & Delivery
Confirm the complete A17FO Series 10 code, approved drawing and operating limits. Availability, quantity, documentation and delivery date are confirmed in the quotation.
Discuss Your A10VSO Series 52 Application
Send the full model code, operating duty, installation details and quantity.
Request a A10VSO Series 52 QuotationA10VSO Series 52 Questions Before Ordering
What type of product is the A10VSO Series 52?
A10VSO Series 52 Variable Piston Pump. Design: Axial piston; variable swashplate. Open circuit. Confirm the complete order code for the offered version.
Can a similar pump replace the A10VSO Series 52?
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
Define required flow at the actual drive speed and continuous pressure. Identify peak pressure, duration and the work cycle. Attach the nameplate, complete order code, installation drawing and required quantity.
A10VSO Series 52 Technical Data & Documents
View A10VSO Series 52 catalog data and operating conditions
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
البيانات الفنية
| حجم | غير مقبول | 10 | 18 | 28 | 45 | 60 | 63 | 72 | 85 | 100 | ||
| الإزاحة الهندسية لكل دورة | Vg الحد الأقصى | سم3 | 10.5 | 18 | 28 | 45 | 60 | 63 | 72 | 85 | 100 | |
| Rotational speed maximum1) | عند Vجي ماكس | nالاسمية | دورة في الدقيقة | 3600 | 3300 | 3000 | 26004) | 2700 | 2600 | 2600 | 2500 | 2300 |
| عند Vg <Vg الحد الأقصى 2) | nالحد الأقصى المسموح به. | دورة في الدقيقة | 4320 | 3960 | 3600 | 3120 | 3140 | 3140 | 3140 | 3000 | 2500 | |
| تدفق | عند nالاسمية و Vجي ماكس | qv | لتر/دقيقة | 37 | 59 | 84 | 117 | 162 | 163 | 187 | 212 | 230 |
| عند nE = 1500 دورة في الدقيقة | qvE | لتر/دقيقة | 15 | 27 | 42 | 68 | 90 | 95 | 108 | 128 | 150 | |
| طاقة | مع Nالاسمية, Vجي ماكس و Δp = 250 بار | P | كيلوواط | 16 | 25 | 35 | 49 | 65 | 68 | 77 | 89 | 96 |
| عند nE= 1500 دورة في الدقيقة | PE | كيلوواط | 7 | 11 | 18 | 28 | 37 | 39 | 45 | 53 | 62 | |
| عزم الدوران | عند Vجي ماكس و Δp = 250 بار | M | لا شيء جديد | 42 | 71 | 111 | 179 | 238 | 250 | 286 | 338 | 398 |
| عند Vجي ماكس و Δp = 100 بار | M | لا شيء جديد | 17 | 29 | 45 | 72 | 95 | 100 | 114 | 135 | 159 | |
| صلابة الدوران عمود القيادة | S | c | نيوتن متر/راديان | 9200 | 11000 | 22300 | 37500 | 65500 | 65500 | 65500 | 143000 | 143000 |
| R | c | نيوتن متر/راديان | – | 14800 | 26300 | 41000 | 69400 | 69400 | 69400 | 152900 | 152900 | |
| U | c | نيوتن متر/راديان | 6800 | 8000 | 16700 | 30000 | 49200 | 49200 | 49200 | 102900 | 102900 | |
| W | c | نيوتن متر/راديان | – | – | 19900 | 34400 | 54000 | 54000 | 54000 | 117900 | 117900 | |
| P | c | نيوتن متر/راديان | 10700 | – | – | – | – | – | – | – | – | |
| عزم القصور الذاتي للمجموعة الدوارة | JTW | كجم.م2 | 0.0006 | 0.0009 | 0.0017 | 0.003 | 0.0056 | 0.0056 | 0.0056 | 0.012 | 0.012 | |
| التسارع الزاوي الأقصى3) | α | راديان/ثانية2 | 8000 | 6800 | 5500 | 4000 | 3300 | 3300 | 3300 | 2700 | 2700 | |
| حجم الحالة | V | L | 0.2 | 0.25 | 0.3 | 0.5 | 0.8 | 0.8 | 0.8 | 1 | 1 | |
| Weight without through drive (approx.) Weight with through drive (approx.) | m | kg | 8 | 11.5 | 15 | 18 | 22 | 22 | 22 | 36 | 36 | |
| – | 13 | 18 | 24 | 28 | 28 | 28 | 45 | 45 | ||||
تحديد خصائص التشغيل
القوى الشعاعية والمحورية المسموح بها على عمود القيادة
| حجم | غير مقبول | 10 | 18 | 28 | 45 | 60/63 | 72 | 85 | 100 | ||
| أقصى قوة شعاعية عند a/2 | ![]() |
Fq الحد الأقصى | N | 250 | 350 | 1200 | 1500 | 1700 | 1500 | 2000 | 2000 |
| القوة المحورية القصوى | ±Fax max | N | 400 | 700 | 1000 | 1500 | 2000 | 1500 | 3000 | 3000 | |
عزم الإدخال والعزم المسموح بهما للقيادة عبر
| حجم | 10 | 18 | 28 | 45 | 60/63 | 72 | 85 | 100 | |||
| عزم الإدخال الأقصى على عمود القيادة2) | |||||||||||
| S | ME max | لا شيء جديد | 126 | 124 | 198 | 319 | 630 | 630 | 1157 | 1157 | |
| ∅ | in | 3/4 | 3/4 | 7/8 | 1 | 1 1/4 | 1 1/4 | 1 1/2 | 1 1/2 | ||
| R | ME max | لا شيء جديد | – | 160 | 250 | 400 | 650 | 650 | 1215 | 1215 | |
| ∅ | in | – | 3/4 | 7/8 | 1 | 1 1/4 | 1 1/4 | 1 1/2 | 1 1/2 | ||
| U | ME max | لا شيء جديد | 60 | 59 | 105 | 188 | 306 | 306 | 628 | 628 | |
| ∅ | in | 5/8 | 5/8 | 3/4 | 7/8 | 1 | 1 | 1 1/4 | 1 1/4 | ||
| W | ME max | لا شيء جديد | – | – | 140 | 220 | 396 | 383 | 650 | 650 | |
| ∅ | in | – | – | 3/4 | 7/8 | 1 | 1 | 1 1/4 | 1 1/4 | ||
| P | ME max | لا شيء جديد | 90 | – | – | – | – | – | – | – | |
| ∅ | mm | 18 | – | – | – | – | – | – | – | ||
| عزم الدوران المسموح به عبر القيادة القصوى | |||||||||||
| S | MD max | لا شيء جديد | – | 108 | 160 | 319 | 484 | 484 | 698 | 698 | |
| R | MD max | لا شيء جديد | – | 120 | 176 | 365 | 484 | 484 | 698 | – | |
| U | MD max | لا شيء جديد | – | 59 | 105 | 188 | 306 | 306 | 628 | 628 | |
| W | MD max | لا شيء جديد | – | – | 140 | 220 | 396 | 383 | 650 | 650 | |
توزيع عزم الدوران
| عزم الدوران الإدخالي | ME=M1+M2+M3 |
| ME < ME max | |
| عزم الدوران عبر القيادة | MD=M2+M3 |
| MD < MD max |
Watch A10VSO Series 52 Product Video
Related Selection Resources
Request a A10VSO Series 52 Quotation
أخبرنا بالتكوين المطلوب، الكمية والتطبيق.
Type code series 52
| 01 | 02 | 03 | 04 | 05 | 06 | 07 | 08 | 09 | 10 | 11 | 12 | ||
| A10V(S) | ○ | / | 32 | - | v |
وحدة كباس محوري
| 10 | 28 | 45 | 60 | 85 | |||
| 01 | Swashplate design, variable, nominal pressure 250 bar, maximum pressure 315 bar | ● | - | - | - | - | A10VS |
| - | ● | ● | ● | ● | A10V |
وضع التشغيل
| 02 | مضخة، الدائرة المفتوحة | ○ |
الحجم (نيجيريا)
| 03 | Geometric displacement, see table of values on page 10 | 10 | 28 | 45 | 60 | 85 |
جهاز تحكم
| 04 | منظم الضغط | هيدروليكي | ● | ● | ● | ● | ● | دكتور | ||||
| مع وحدة تحكم التدفق | هيدروليكي | إكس - تي مفتوح | ● | ● | ● | ● | ● | DFR | ||||
| تم توصيل X-T | مع وظيفة الشطف | ● | ● | ● | ● | ● | DFR1 | |||||
| بدون وظيفة التنظيف | ● | ● | ● | ● | ● | DRSC | ||||||
| مع قطع الضغط | هيدروليكي | تحكم عن بعد | ● | ● | ● | ● | ● | دي إر جي | ||||
| كهربائي | تحكم سلبي | الجهد = 12 فولت | ● | ● | ● | ● | ● | ED71 | ||||
| الجهد = 24 فولت | ● | ● | ● | ● | ● | ED72 | ||||||
| كهربائي | شاهد إيجابي | الجهد = 12 فولت | ● | ● | ● | ● | ● | ER71 | ||||
| الجهد = 24 فولت | ● | ● | ● | ● | ● | ER72 | ||||||
| Differential pressure control | electric control (negative control) | ● | ● | ● | ● | ○ | EF..1) | |||||
مسلسل
| 10 | 28 | 45 | 60 | 85 | |||
| 05 | Series 5, index 2 | ● | ● | ● | ● | ● | 52 |
اتجاه الدوران
| 06 | تمت معاينته على عمود الدوران | مع عقارب الساعة | R |
| عكس عقارب الساعة | L |
مادة مانعة للتسرب
| 07 | FKM (إيلاستومر فلوري) | V |
عمود الدوران
| 08 | عمود مسنن
IS0 3019-1 |
عمود قياسي | ● | ● | ● | ● | ● | S |
| مشابه للعمود "S" ولكن لعزم دوران أدخل أعلى | - | ● | ● | ● | ● | R | ||
| قطر مخفض، ملاءمة محدودة للتشغيل النافذ | ● | ● | ● | ● | ● | U | ||
| similar to shaft "U", however for higher torque only conditionally suitable for mounting with through drive. | - | ● | ● | ● | ● | W | ||
| Parallel keyed shaft DIN 6885 limited suitability for through drive | ● | - | - | - | - | P | ||
شفة التركيب
| 09 | ISO 3019-2 (ISO) | ثقبان | ● | - | - | - | - | A |
| آي إس أو 3019-1 (إس إيه إي) | ذو 4 ثقوب | ● | ● | ● | ● | ● | C | |
| ذو 4 ثقوب | - | - | - | ● | - | D |
منفذ عامل
| 10 | 28 | 45 | 60 | 85 | |||||
| 10 | SAE flange ports Fastening thread metric | rear | not for through drive | - | ● | ● | ● | ● | 11 |
| laterally opposite | for through drive | - | ● | ● | ● | ● | 12 | ||
| at side,offset 90° | not for through drive;
available for counter-clockwise rotation only |
- | - | ● | - | - | 13 | ||
| Threaded port metric | rear | not for through drive | ● | - | - | - | - | 14 |
من خلال القيادة
| 11 | شفة ISO 3019-1
قطر |
سرّة لعمود مسنن1)
قطر |
045 | 071 | 100 | 140 | 180 | ||
| بدون محرك مرور | ● | ● | ● | ● | ● | N00 | |||
| ٢-٨٢ (أ) | ٥/٨ بوصة | 9T 16/32DP | - | ● | ● | ● | ● | K01 | |
| ٣/٤ بوصة | 11 سن 16/32DP | - | ● | ● | ● | ● | K52 | ||
| ١٠١-٢ (ب) | 7/8 بوصة | 13 سن 16/32DP | - | ● | ● | ● | ● | K68 | |
| ١ بوصة | 15T 16/32DP | - | - | ● | ● | ● | K04 | ||
| 127-4 (C) | ١ وربع بوصة | 14 سن 12/24 دي بي | - | - | - | ● | ● | K15 | |
| 1 1/2 بوصة | 17T12/24DP | - | - | - | - | ● | K16 | ||
| 127-2 (C) | ١ ١/٤ بوصة | 14 سن 12/24 دي بي | - | - | - | - | ● | K07 | |
| 1 1/2 in | 17 سن 12/24DP | - | - | - | - | ● | K24 | ||
موصلات الملفات اللولبية
| 12 | Without connector (without solenoid, only for hydraulic controls, without signs) | ● | ● | ● | ● | ● | |
| DEUTSCH - molded connector, 2-pin, without suppressor diode (for electric control) | - | ● | ● | ● | ● | P |
•= Available ○ = On request - = Not available
البيانات الفنية
| حجم | غير مقبول | 10 | 18 | 28 | 45 | 60 | 63 | 72 | 85 | 100 | ||
| الإزاحة الهندسية لكل دورة | Vg الحد الأقصى | سم3 | 10.5 | 18 | 28 | 45 | 60 | 63 | 72 | 85 | 100 | |
| سرعة الدوران
الحد الأقصى1) |
عند Vجي ماكس | nالاسمية | دورة في الدقيقة | 3600 | 3300 | 3000 | 26004) | 2700 | 2600 | 2600 | 2500 | 2300 |
| عند Vg <Vg الحد الأقصى 2) | nالحد الأقصى المسموح به. | دورة في الدقيقة | 4320 | 3960 | 3600 | 3120 | 3140 | 3140 | 3140 | 3000 | 2500 | |
| تدفق | عند nالاسمية و Vجي ماكس | qv | لتر/دقيقة | 37 | 59 | 84 | 117 | 162 | 163 | 187 | 212 | 230 |
| عند nE = 1500 دورة في الدقيقة | qvE | لتر/دقيقة | 15 | 27 | 42 | 68 | 90 | 95 | 108 | 128 | 150 | |
| طاقة | مع Nالاسمية, Vجي ماكس
و Δp = 250 بار |
P | كيلوواط | 16 | 25 | 35 | 49 | 65 | 68 | 77 | 89 | 96 |
| عند nE= 1500 دورة في الدقيقة | PE | كيلوواط | 7 | 11 | 18 | 28 | 37 | 39 | 45 | 53 | 62 | |
| عزم الدوران | عند Vجي ماكس
و Δp = 250 بار |
M | لا شيء جديد | 42 | 71 | 111 | 179 | 238 | 250 | 286 | 338 | 398 |
| عند Vجي ماكس
و Δp = 100 بار |
M | لا شيء جديد | 17 | 29 | 45 | 72 | 95 | 100 | 114 | 135 | 159 | |
| صلابة الدوران عمود القيادة | S | c | نيوتن متر/راديان | 9200 | 11000 | 22300 | 37500 | 65500 | 65500 | 65500 | 143000 | 143000 |
| R | c | نيوتن متر/راديان | - | 14800 | 26300 | 41000 | 69400 | 69400 | 69400 | 152900 | 152900 | |
| U | c | نيوتن متر/راديان | 6800 | 8000 | 16700 | 30000 | 49200 | 49200 | 49200 | 102900 | 102900 | |
| W | c | نيوتن متر/راديان | - | - | 19900 | 34400 | 54000 | 54000 | 54000 | 117900 | 117900 | |
| P | c | نيوتن متر/راديان | 10700 | - | - | - | - | - | - | - | - | |
| عزم القصور الذاتي للمجموعة الدوارة | JTW | كجم.م2 | 0.0006 | 0.0009 | 0.0017 | 0.003 | 0.0056 | 0.0056 | 0.0056 | 0.012 | 0.012 | |
| التسارع الزاوي الأقصى3) | α | راديان/ثانية2 | 8000 | 6800 | 5500 | 4000 | 3300 | 3300 | 3300 | 2700 | 2700 | |
| حجم الحالة | V | L | 0.2 | 0.25 | 0.3 | 0.5 | 0.8 | 0.8 | 0.8 | 1 | 1 | |
| الوزن بدون القيادة المباشرة (تقريبًا)
الوزن مع القيادة المباشرة (تقريبًا) |
m | kg | 8 | 11.5 | 15 | 18 | 22 | 22 | 22 | 36 | 36 | |
| - | 13 | 18 | 24 | 28 | 28 | 28 | 45 | 45 | ||||
تحديد خصائص التشغيل
| تدفق | qv=(Vg ∙ n ∙ ηv) / 1000 | لتر/دقيقة |
| عزم الدوران | م = (فg ∙ Δp) / (20 ∙ π ∙ ηhm) | لا شيء جديد |
| طاقة | P = (2π ∙ م ∙ ن) / 60000 = (qv ∙ Δp) / (600 ∙ ηt) | كيلوواط |
مفتاح
Vg الإزاحة لكل دورة في [سم3]
Δp ضغط تفاضلي [بار]
ن سرعة الدوران [دورة في الدقيقة]
ηv الكفاءة الحجمية
ηhm الكفاءة الهيدروليكية الميكانيكية
ηt الكفاءة الكلية (ηt= ηv*ηhm)
1) القيم قابلة للتطبيق:
- عند ضغط مطلق pabs = 1 بار عند منفذ الشفط S
- لنطاق اللزوجة المثلى من Vاختيار = 36 إلى 16 ملم2/s
- مع سائل هيدروليكي يعتمد على زيوت معدنية
2)انظر الرسم التخطيطي في الصفحة 9 عند زيادة السرعة حتى nالحد الأقصى المسموح به.
3)البيانات صالحة للقيم بين الحد الأدنى المطلوب والحد الأقصى المسموح به لسرعة الدوران. ينطبق ذلك على المحفزات الخارجية (مثل محرك ديزل بسرعة دورانية من 2 إلى 8 مرات، عمود الكردان مرتين سرعة الدوران). القيمة الحدية صالحة فقط لمضخة واحدة. يجب مراعاة سعة التحميل لأجزاء الاتصال.
القوى الشعاعية والمحورية المسموح بها على عمود القيادة
| حجم | غير مقبول | 10 | 18 | 28 | 45 | 60/63 | 72 | 85 | 100 | ||
| أقصى قوة شعاعية عند a/2 | ![]() |
Fq الحد الأقصى | N | 250 | 350 | 1200 | 1500 | 1700 | 1500 | 2000 | 2000 |
| القوة المحورية القصوى | ±Fax max | N | 400 | 700 | 1000 | 1500 | 2000 | 1500 | 3000 | 3000 | |
عزم الإدخال والعزم المسموح بهما للقيادة عبر
| حجم | 10 | 18 | 28 | 45 | 60/63 | 72 | 85 | 100 | |||
| عزم الدوران عند Vجي ماكس و Δp = 250 بار1) | Mالحد الأقصى | لا شيء جديد | 42 | 71 | 111 | 179 | 250 | 321 | 338 | 398 | |
| عزم الإدخال الأقصى على عمود القيادة2) | |||||||||||
| S | ME max | لا شيء جديد | 126 | 124 | 198 | 319 | 630 | 630 | 1157 | 1157 | |
| ∅ | in | 3/4 | 3/4 | 7/8 | 1 | 1 1/4 | 1 1/4 | 1 1/2 | 1 1/2 | ||
| R | ME max | لا شيء جديد | - | 160 | 250 | 400 | 650 | 650 | 1215 | 1215 | |
| ∅ | in | - | 3/4 | 7/8 | 1 | 1 1/4 | 1 1/4 | 1 1/2 | 1 1/2 | ||
| U | ME max | لا شيء جديد | 60 | 59 | 105 | 188 | 306 | 306 | 628 | 628 | |
| ∅ | in | 5/8 | 5/8 | 3/4 | 7/8 | 1 | 1 | 1 1/4 | 1 1/4 | ||
| W | ME max | لا شيء جديد | - | - | 140 | 220 | 396 | 383 | 650 | 650 | |
| ∅ | in | - | - | 3/4 | 7/8 | 1 | 1 | 1 1/4 | 1 1/4 | ||
| P | ME max | لا شيء جديد | 90 | - | - | - | - | - | - | - | |
| ∅ | mm | 18 | - | - | - | - | - | - | - | ||
| عزم الدوران المسموح به عبر القيادة القصوى | |||||||||||
| S | MD max | لا شيء جديد | - | 108 | 160 | 319 | 484 | 484 | 698 | 698 | |
| R | MD max | لا شيء جديد | - | 120 | 176 | 365 | 484 | 484 | 698 | - | |
| U | MD max | لا شيء جديد | - | 59 | 105 | 188 | 306 | 306 | 628 | 628 | |
| W | MD max | لا شيء جديد | - | - | 140 | 220 | 396 | 383 | 650 | 650 | |
توزيع عزم الدوران

| عزم الدوران عند المضخة الأولى | M1 |
| عزم الدوران عند المضخة الثانية | M2 |
| عزم الدوران عند المضخة الثالثة | M3 |
| عزم الدوران الإدخالي | ME=M1+M2+M3 |
| ME < ME max | |
| عزم الدوران عبر القيادة | MD=M2+M3 |
| MD < MD max |
1)الكفاءة غير محسوبة
2) لأعمدة القيادة بدون قوة شعاعية

-5.webp)
-4.webp)
-1.webp)


-2.webp)

-2.webp)