A11VO Open Circuit Variable Piston Pump

The A11VO variable pump is offered for open-circuit mobile hydraulics. Its family documentation includes A11VO and charged A11VLO arrangements, so speed and inlet conditions must be attached to the actual version rather than combined into one family maximum.

  • Mobile-application focus
  • Self-priming or charged arrangements
  • Through-drive configuration available
  • Variable displacement and multiple controls

PRANCE HYDRAULIC · PRODUCT SERIES

A11VO Open Circuit Variable Piston Pump

Axial piston; variable swashplate · Open circuit

The A11VO variable pump is offered for open-circuit mobile hydraulics. Its family documentation includes A11VO and charged A11VLO arrangements, so speed and inlet conditions must be attached to the actual version rather than combined into one family maximum.

Model

✓A11VO original product photograph
A11VOAxial piston; variable swashplate
Request a Quotationعرض البيانات الفنية وورقة البيانات

Confirm the complete model and approved specification with Prance Hydraulic. Product-series references alone do not establish interchangeability.

Configuration review · Technical documentation · Product selection

تفاصيل المنتج

  • Mobile-application focus
  • Self-priming or charged arrangements
  • Through-drive configuration available
  • Variable displacement and multiple controls

CATEGORIES: مضخة مكبسية, مضخة ذات إزاحة متغيرة

A11VO Features & Application

Mobile-application focus

Specify the full MS order code, installation drawing and operating duty so the quotation can identify the proposed configuration.

Self-priming or charged arrangements

Specify the full MS order code, installation drawing and operating duty so the quotation can identify the proposed configuration.

Through-drive configuration available

Review combined drive torque and simultaneous demand, including any additional pump connected to the drive.

Variable displacement and multiple controls

Match the complete control option and its command requirements to the existing controller. Similar housings can use different control arrangements.

A11VO Specifications

Series / modelA11VO
Product typeA11VO Open Circuit Variable Piston Pump
تصميمAxial piston; variable swashplate
Circuit / selectionOpen circuit
Published family sizes40, 60, 75, 95, 130, 145, 190 and 260; version-dependent
Inlet arrangementConfirm self-priming, pressurized tank or charged version

A11VO Selection & Configuration

The A11VO variable pump is offered for open-circuit mobile hydraulics. Its family documentation includes A11VO and charged A11VLO arrangements, so speed and inlet conditions must be attached to the actual version rather than combined into one family maximum.

Review the required flow and power over the machine work cycle, including any pump mounted on the through drive. Specify the inlet arrangement, control and simultaneous auxiliary demand. Confirm whether the quoted unit is A11VO or A11VLO before applying a speed limit.

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

Your Application.
The Right Configuration.

Hydraulic pumps · Hydraulic motors · Hydraulic valves

Send the MS nameplate, operating requirements and installation drawing for a configuration review before quoting.

  • Model review — send the full model code or an existing nameplate photograph.
  • Interface matching — confirm shaft, mounting flange, rotation and ports.
  • Operating conditions — provide flow, pressure, speed, fluid and duty cycle.
  • Documentation — request the relevant product data and drawings for your review.
Prance workshop with a row of production equipment

A11VO Buying Guide

Use this sequence to prepare the A11VO configuration for review and quotation.

  1. Define required flow at the actual drive speed and continuous pressure.
  2. Identify peak pressure, duration and the work cycle.
  3. Confirm the selected displacement control and any auxiliary-drive requirement.
  4. Match rotation viewed from the shaft end, shaft, flange and ports.
  5. Review inlet conditions, drain routing and the installation envelope.
  6. Confirm fluid, viscosity, temperature, filtration and seals.
  7. Approve the complete model, control, drawing, quantity and delivery terms.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

Selection, Documentation & Project Support

Prance technical team image from its company website

Selection Support

Learn more →

Share your hydraulic circuit, operating point and installation requirements for a configuration discussion.


Flow · Pressure · Speed · Interfaces
Prance quality standards image from its company website

Technical Resources

Learn more →

Review product documentation, model codes and technical data before finalizing the specification.


Datasheets · Model codes · Drawings
Prance sales team image from its company website

Project Inquiries

Learn more →

Send your required model, quantity, application and project requirements to discuss your inquiry.


Product inquiries · Configuration review

Configuration, Quantity & Delivery

Confirm the complete MS code, approved drawing and operating limits. Availability, quantity, documentation and delivery date are confirmed in the quotation.

Discuss Your A11VO Application

Send the full model code, operating duty, installation details and quantity.

Request a A11VO Quotation

A11VO Questions Before Ordering

What type of product is the A11VO?

A11VO Open Circuit Variable Piston Pump. Design: Axial piston; variable swashplate. Open circuit. Confirm the complete order code for the offered version.

Can a similar pump replace the A11VO?

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

Define required flow at the actual drive speed and continuous pressure. Identify peak pressure, duration and the work cycle. Attach the nameplate, complete order code, installation drawing and required quantity.

A11VO Technical Data & Documents

View A11VO catalog data and operating conditions

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.

البيانات الفنية

جدول القيم (القيم النظرية، بدون كفاءة وتحملات؛ القيم مقربة)

حجم A11VO 40 60 75 95 130 190 190 260
إزاحة Vg الحد الأقصى سم3 42 58.5 74 93.5 130 190 190 260
Vg الحد الأدنى سم3 0 0 0 0 0 0 0 0
سرعة
الحد الأقصى عند Vg الحد الأقصى1) الحد الأقصى عند Vg ≤ Vg الحد الأقصى1) nالحد الأقصى دورة في الدقيقة 3000 2700 2550 2350 2100 2200 2100 1800
nالأقصى 1 دورة في الدقيقة 3500 3250 3000 2780 2500 2500 2100 2300
صلابة الدوران عمود Z نيوتن متر/راديان 88894 102440 145836 199601 302495 302495 346190 686465
عمود P نيوتن متر/راديان 87467 107888 143104 196435 312403 312403 383292 653835
عمود S نيوتن متر/راديان 58347 86308 101921 173704 236861 236861 259773 352009
عمود T نيوتن متر/راديان 74476 102440 12560 – – – 301928 567115
عزم القصور الذاتي للمجموعة الدوارة JTW كجم.م2 0.0048 0.0082 0.0115 0.0173 0.0318 0.0341 0.055 0.0878
التسارع الزاوي، الحد الأقصى4) α راديان/ثانية2 22000 17500 15000 13000 10500 9000 6800 4800
سعة التعبئة V I 1.1 1.35 1.85 2.1 2.9 2.9 3.8 4.6
الكتلة (تقريبًا) m kg 32 40 45 53 66 76 95 125
حجم A11VO 130 145 190 260
إزاحة Vg الحد الأقصى سم3 130 145 193 260
Vg الحد الأدنى سم3 0 0 0 0
سرعة
الحد الأقصى عند Vg الحد الأقصى1) الحد الأقصى عند Vg ≤ Vg الحد الأقصى1) nالحد الأقصى دورة في الدقيقة 2500 2500 2500 2300
nالأقصى 1 دورة في الدقيقة 2500 2500 2500 2300
صلابة الدوران عمود Z نيوتن متر/راديان 302495 302495 346190 686465
عمود P نيوتن متر/راديان 312403 312403 383292 653835
عمود S نيوتن متر/راديان 236861 236861 259773 352009
عمود T نيوتن متر/راديان – – 301928 567115
عزم القصور الذاتي للمجموعة الدوارة JTW كجم.م2 0.0337 0.036 0.0577 0.0895
التسارع الزاوي، الحد الأقصى4) α راديان/ثانية2 10500 9000 6800 4800
سعة التعبئة V I 2.9 2.9 3.8 4.6
الكتلة (تقريبًا) m kg 72 73 104 138
1) تنطبق القيم عند الضغط المطلق (Pabs) 1 bar at the suction port S and mineral hydraulic fluid. 2)The values apply at absolute pressure (Pabs) of at least 0.8 bar at the suction port S and mineral hydraulic fluid. 3) The values apply at Vs Vg max or in case of an increase in the inlet pressure Pabs at the suction port S (see diagram page 6) 4) – The area of validity is situated between 0 and the maximum permissible speed.It applies for external stimuli (e.g. engine 2-8 times rotary frequency, cardan shaft twice the rotary frequency). -The limit value applies for a single pump only. -The loading on the connection parts has to be considered. Caution: Exceeding the permissible limit values could cause a loss of function, reduced service life or the destruction of the axial piston unit. The permissible values can be determined by calculation.

الحمل المسموح به على عمود القيادة شعاعياً ومحورياً

القيم المذكورة هي بيانات قصوى وليست قابلة للاستخدام المستمر
حجم 40 60 75 95 130 190 190 260
القوة الشعاعية، الحد الأقصى عند المسافة أ، ب، ج (من طوق العمود)   Fq الحد الأقصى a N mm 3600 5000 6300 8000 11000 11000 16925 22000
17.5 17.5 20 20 22.5 22.5 26 29
Fq الحد الأقصى b N mm 2891 4046 4950 6334 8594 8594 13225 16809
30 30 35 35 40 40 46 50
Fq الحد الأقصى c N mm 2416 3398 4077 5242 7051 7051 108500 13600
42.5 42.5 50 50 57.5 57.5 66 71
القوة المحورية، الحد الأقصى.   ±Fax الحد الأقصى N 1500 2200 2750 3500 4800 4800 6000 4150

القوى المسموح بها للدخول والمرور عبر عزم الدوران

حجم 40 60 75 95 130 190 190 260
عزم الدوران للدخول، الحد الأقصى.2) at shaft end P Shaft key DN 6885
TE perm. لا شيء جديد 468 648 824 1044 1448 1448 2226 2787
Φ32 Φ35 Φ40 Φ45 Φ50 Φ50 Φ55 Φ60
at Z shaft end DIN 5480 TE perm. لا شيء جديد 912 912 1460 2190 3140 3140 3140 5780
و35 و35 عرض 40 عرض 45 عرض 50 عرض 50 عرض 50 عرض 60
at S shaft end ANSI B92.1a-1976 (SAE J744) TE perm. لا شيء جديد 314 602 602 1640 1640 1640 1640 1640
١ بوصة ١ وربع بوصة ١ وربع بوصة 1 3/4 بوصة 1 3/4 بوصة 1 3/4 بوصة 1 3/4 بوصة 1 3/4 بوصة
at T shaft end ANSI B92.1a-1976 (SAE J744) TE perm. لا شيء جديد 602 970 970 – – – 2670 4070
1 1/4 بوصة 1 3/8 بوصة 1 3/8 بوصة – – – 2 بوصة 2 1/4 بوصة
عزم الدوران عبر القيادة، الحد الأقصى.3) TD perm. لا شيء جديد 314 521 660 822 1110 1110 1760 2065
1)Efficiency not considered 2) For drive shafts with no radial force 3) Observe max. input torque for shaft S!

توزيع العزم

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

تحديد القيمة الاسمية

Vg = الإزاحة لكل دورة بالديسيمتر3 Δp = Differential pressure in bar n = Speed in rpm ηv = Volumetric efficiency ηمم = Mechanical-hydraulic efficiency ηt = الكفاءة العامة (nt= nv* nمم)
Watch A11VO Product Video
A11VO product video

Request a A11VO Quotation

أخبرنا بالتكوين المطلوب، الكمية والتطبيق.

نموذج الاتصال التجريبي
A11VO original product photograph

رمز الطلب / البرنامج القياسي

A11V ○ / 1 - N
01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16

وحدة كباس محوري

01 تصميم لوح التآكل، متغير، الضغط الاسمي 350 بار، أقصى ضغط 400 بار A11V

مضخة الشحن (المروحة)

02 بدون مضخة شحن ● ● ● ● ● ● ● ●
مع مضخة شحن - - - - ● ● ● ● L

عملية

03 مضخة، الدائرة المفتوحة ○

حجم

04 ≈الازاحة Yg الحد الأقصىبالسنتيمتر3 40 60 75 95 130 145 190 260

وحدة التحكم

05 التحكم في الطاقة اليسار ● ● ● ● ● ● ● ● اليسار
مع تجاوز الاستشعار المتقاطع سلبي اليسار C ● ● ● ● ● ● ● ● إل بي سي
متعلق بالضغط العالي سلبي LR3 ● ● ● ● ● ● ● ● LR3
مرتبط بضغط الدليل سلبي LG1 ● ● ● ● ● ● ● ● LG1
إيجابي LG2 ● ● ● ● ● ● ● ● LG2
كهربائي الجهد = 12 فولت سلبي جنيه مصري واحد ○ ○ ○ ● ● ● ● ● جنيه مصري واحد
الجهد = 24 فولت سلبي إل إي 2 ○ ● ● ● ● ● ● ● إل إي 2
مع قطع الضغط D ● ● ● ● ● ● ● ● ل. د.
هيدروليكي، مرحلتين E ● ● ● ● ● ● ● ● ج.م.
هيدروليكي، يتحكم به عن بعد G ● ● ● ● ● ● ● ● L..G.
مع استشعار الحمل S ● ● ● ● ● ● ● ● إل...إس
كهربائي، تجاوز المروحة، 24 فولت إس 2 ○ ○ ○ ● ● ● ● ● L...S2
هيدروليكي، تجاوز الدعامة أس 5 ○ ○ ○ ● ● ● ● ● L...S5
مع محدّد الشوط سلبي

خاصية

Δp = 25 بار H1 ● ● ● ● ● ● ● ● L...H1
Δp = 10 بار H5 ● ● ● ● ● ● ● ● L...H5
إيجابي

خاصية

Δp = 25 بار H2 ● ● ● ● ● ● ● ● L...H2
Δp = 10 بار H6 ● ● ● ● ● ● ● ● إل...إتش 6
الجهد = 12 فولت U1 ● ● ● ● ● ● ● ● L...U1
الجهد = 24 فولت يو تو ● ● ● ● ● ● ● ● L...U2
التحكم في الضغط دكتور ● ● ● ● ● ● ● ● دكتور
مع استشعار الحمل نظام تقليل المقاومة ● ● ● ● ● ● ● ● نظام تقليل المقاومة
تحكم عن بعد دي إر جي ● ● ● ● ● ● ● ● دي إر جي
للتشغيل على التوازي دي آر إل ● ● ● ● ● ● ● ● دي آر إل
تحكم هيدروليكي، مرتبط بضغط الإرشاد (صفة إيجابية) Δp = 10 بار HD1 ● ● ● ● ● ● ● ● HD1
Δp=25 بار HD2 ● ● ● ● ● ● ● ● HD2
مع قطع الضغط D ● ● ● ● ● ● ● ● HD.D
مع قطع الضغط، يتحكم عن بعد G ○ ● ○ ○ ○ ○ ● ● HD.G
التحكم الكهربائي بمغناطيس تناسبي (صفة إيجابية) U=12 فولت EP1 ● ● ● ● ● ● ● ● EP1
U=24 فولت EP2 ● ● ● ● ● ● ● ● EP2
مع قطع الضغط D ● ● ● ● ● ● ● ● EP.D
مع قطع الضغط، يتحكم عن بعد G ● ● ● ● ● ● ● ● EP.G

في حالة التحكمات التي تحتوي على وظائف إضافية متعددة، راعِ ترتيب الأعمدة، خيار واحد فقط لكل عمود ممكن (مثلاً LRDCH2). التركيبات التالية غير متاحة للتحكم في الطاقة: LRDS2، LRDS5، L.. GS، L.. GS2، L. GS5EC، والتركيبة L..DG بالتزامن مع محددات السكتة H1، H2، H5، H6، U1 و U2.

مسلسل

06 1

الفهرس

07 الحجم 40 ... 130 0
الحجم 145...260 1

اتجاه الدوران

08 من نهاية العمود مع عقارب الساعة R
عكس عقارب الساعة L

أختام

09 حلقة ختم عمود من NBR (نترات البولي فينيل) في FKM (فلورو-كاوتشوك) N

نهاية العمود

10 40 60 75 95 130 145 190 260
عمود مسنن DIN 5480 لمضخة مفردة ومركبة ● ● ● ● ● ● ● ● Z
عمود متوازي مسنن DIN 6885 ● ● ● ● ● ● ● ● P
عمود مسنن ANSI B92.1a-1976 لمضخة واحدة ● ● ● ● ● ● ● ● S
لمضخة مركبة ● ● ● _1) _1) _1) ● ● T

شفة التركيب

11 40 60 75 95 130 145 190 260
مسمار SAE J744-2 ● ● - - - - - - C
مسمار SAE J744-4 - - ● ● ● ● ● ● D
SAE J6172) (SAE 3) - - - ● ● ● ● - G

منافذ خط الخدمة

12 منفذ الضغط والشفط SAE، على الجانب، الجانب المقابل

(بخيوط تثبيت ميتريكية)

40 60 75 95 130 145 190 260
● ● ● ● ● ● ● ● 12

من خلال القيادة

40 60 75 95 130 145 190 260
13 فلنجة SAE J7443) موصل لعمود مسنن
- - ● ● ● ● ● ● ● ● N00
82-2 (أ) نصف بوصة 9T 16/32DP (أ) ● ● ● ● ● ● ● ● K01
ثلاثة أرباع بوصة 11 سن 16/32DP (أ-ب) ○ ● ○ ● ● ● ○ ○ K52
101-2 (ب) 7/8 بوصة 13 سن 16/32DP (ب) ● ● ● ● ● ● ● ● K02
١ بوصة 15T 16/32DP (ب-ب) ● ● ● ● ● ● ● ● K04
و35 2x30x16x9جم ● ● ● ● ● ● ● ● ك79
127-2 (ج)4) 1 1/4 إنش 14 سن 12/24 دي بي (ج) - ● ● ● ● ● ● ● K07
1 1/2 إنش 17 سن 12/24DP (ج-ج) - - - ● ● ● ● ● K24
و30 2x30x14x9جم - ● ● ● ● ● ● ● ك80
و35 2x30x16x9جم - ● ● ● ● ● ● ● ك61
152-4 (د) 1 1/4 إنش 14 سن 12/24 دي بي (ج) - - ● ● ● ● ● ● كي86
1 3/4 إنش 13 سن 8/16DP (د) - - - - ● ● ● ● K17
عرض 40 2x30x18x9جم - - ● ● ● ● ● ● كي81
عرض 45 2x30x21x9جم - - - ● ● ● ● ● كي82
عرض 50 2x30x24x9جم - - - - ● ● ● ● كي83
165-4 (هـ) 1 3/4 إنش 13 سن 8/16DP (د) - - - - - - ● ● كي72
عرض 50 2x30x24x9جم - - - - - - ● ● كي84
عرض 60 2x30x28x9جم - - - - - - - ● كي67

مؤشر زاوية الدوران

14 40 60 75 95 130 145 190 260
بدون مؤشر زاوية الدوران (بدون رمز) ● ● ● ● ● ● ● ●
مع مؤشر زاوية الدوران البصري ● - ● ● ● ● ● ● v
مع حساس زاوية الدوران الكهربائي ● - ● ● ● ● ● ● R

موصل للملفات اللولبية

15 40 60 75 95 130 145 190 260
موصل ديوتش مصبوب، ذو طرفين - بدون ديود مانع للتشويش ● ● ● ● ● ● ● ● P

الإصدار القياسي/الخاص

16 الإصدار القياسي بدون رمز
مُدمج مع جزء ملحق أو مضخة ملحقة -K
الإصدار الخاص -S
مُدمج مع جزء ملحق أو مضخة ملحقة -SK

1) عمود على شكل حرف S مناسب لمضخة التركيب!

2) لتركيب علبة عمود المروحة لمحرك الاحتراق الداخلي

3) 22 ثقب؛ 44 ثقب

4) الحجم 190 و 260 مع فلنجة ذات ثقبين + 4 ثقوب

•= متوفر ○= عند الطلب -= غير متوفر      البرنامج المفضل

البيانات الفنية

جدول القيم (القيم النظرية، بدون كفاءة وتحملات؛ القيم مقربة)

حجم A11VO 40 60 75 95 130 190 190 260
إزاحة Vg الحد الأقصى سم3 42 58.5 74 93.5 130 190 190 260
Vg الحد الأدنى سم3 0 0 0 0 0 0 0 0
سرعة
الحد الأقصى عند Vg الحد الأقصى1)

الحد الأقصى عند Vg ≤ Vg الحد الأقصى1)

nالحد الأقصى دورة في الدقيقة 3000 2700 2550 2350 2100 2200 2100 1800
nالأقصى 1 دورة في الدقيقة 3500 3250 3000 2780 2500 2500 2100 2300
تدفق

عند nالحد الأقصى و vجي ماكس

qv الأقصى لتر/دقيقة 126 158 289 220 273 319 405 468
التدفق عند

qv الحد الأقصى و Δp = 350 بار

Pالحد الأقصى كيلوواط 74 92 110 128 159 186 236 273
عزم الدوران عند

vg الحد الأقصى و Δp = 350 بار

Tالحد الأقصى لا شيء جديد 234 326 412 521 724 808 1075 1448
صلابة الدوران عمود Z نيوتن متر/راديان 88894 102440 145836 199601 302495 302495 346190 686465
عمود P نيوتن متر/راديان 87467 107888 143104 196435 312403 312403 383292 653835
عمود S نيوتن متر/راديان 58347 86308 101921 173704 236861 236861 259773 352009
عمود T نيوتن متر/راديان 74476 102440 12560 - - - 301928 567115
عزم القصور الذاتي للمجموعة الدوارة JTW كجم.م2 0.0048 0.0082 0.0115 0.0173 0.0318 0.0341 0.055 0.0878
التسارع الزاوي، الحد الأقصى4) α راديان/ثانية2 22000 17500 15000 13000 10500 9000 6800 4800
سعة التعبئة V I 1.1 1.35 1.85 2.1 2.9 2.9 3.8 4.6
الكتلة (تقريبًا) m kg 32 40 45 53 66 76 95 125
حجم A11VO 130 145 190 260
إزاحة Vg الحد الأقصى سم3 130 145 193 260
Vg الحد الأدنى سم3 0 0 0 0
سرعة
الحد الأقصى عند Vg الحد الأقصى1)

الحد الأقصى عند Vg ≤ Vg الحد الأقصى1)

nالحد الأقصى دورة في الدقيقة 2500 2500 2500 2300
nالأقصى 1 دورة في الدقيقة 2500 2500 2500 2300
تدفق

عند nالحد الأقصى و vجي ماكس

qv الأقصى لتر/دقيقة 325 363 483 598
التدفق عند

qv الحد الأقصى و Δp = 350 بار

Pالحد الأقصى كيلوواط 190 211 281 349
عزم الدوران عند

vg الحد الأقصى و Δp = 350 بار

Tالحد الأقصى لا شيء جديد 724 808 1075 1448
صلابة الدوران عمود Z نيوتن متر/راديان 302495 302495 346190 686465
عمود P نيوتن متر/راديان 312403 312403 383292 653835
عمود S نيوتن متر/راديان 236861 236861 259773 352009
عمود T نيوتن متر/راديان - - 301928 567115
عزم القصور الذاتي للمجموعة الدوارة JTW كجم.م2 0.0337 0.036 0.0577 0.0895
التسارع الزاوي، الحد الأقصى4) α راديان/ثانية2 10500 9000 6800 4800
سعة التعبئة V I 2.9 2.9 3.8 4.6
الكتلة (تقريبًا) m kg 72 73 104 138

1) تنطبق القيم عند الضغط المطلق (Pabs) 1 بار عند منفذ الشفط S وسائل هيدروليكية معدنية.

2) تنطبق القيم عند الضغط المطلق (Pabs) لا يقل عن 0.8 بار عند منفذ الشفط S وسائل هيدروليكية معدنية.

3) تنطبق القيم عند Vs Vg الحد الأقصى أو في حالة زيادة ضغط المدخل Pabs عند منفذ الشفط S (انظر الرسم التخطيطي الصفحة 6)

4) - منطقة الصلاحية تقع بين 0 والسرعة القصوى المسموح بها. تنطبق على التحفيزات الخارجية (مثل محرك 2-8 مرات تردد الدوران، عمود الكردان مرتين تردد الدوران).

-القيمة الحدية تنطبق على مضخة واحدة فقط.

-يجب أخذ الحمل على أجزاء الاتصال في الاعتبار.

تحذير:

قد يتسبب تجاوز القيم الحدية المسموح بها في فقدان الوظيفة، تقليل عمر الخدمة أو تدمير وحدة المكبس المحوري. يمكن تحديد القيم المسموح بها عن طريق الحساب.

الحمل المسموح به على عمود القيادة شعاعياً ومحورياً

القيم المذكورة هي بيانات قصوى وليست قابلة للاستخدام المستمر

حجم 40 60 75 95 130 190 190 260
القوة الشعاعية، الحد الأقصى عند المسافة أ، ب، ج (من طوق العمود)

 

Fq الحد الأقصى

a

N

mm

3600 5000 6300 8000 11000 11000 16925 22000
17.5 17.5 20 20 22.5 22.5 26 29
Fq الحد الأقصى

b

N

mm

2891 4046 4950 6334 8594 8594 13225 16809
30 30 35 35 40 40 46 50
Fq الحد الأقصى

c

N

mm

2416 3398 4077 5242 7051 7051 108500 13600
42.5 42.5 50 50 57.5 57.5 66 71
القوة المحورية، الحد الأقصى.

 

±Fax الحد الأقصى N 1500 2200 2750 3500 4800 4800 6000 4150

القوى المسموح بها للدخول والمرور عبر عزم الدوران

حجم 40 60 75 95 130 190 190 260
عزم الدوران

(عند Vg الحد الأقصى و Δp = 350 بار 1)

Tالحد الأقصى لا شيء جديد 234 326 412 521 724 808 1075 1448
عزم الدوران للدخول، الحد الأقصى.2)

عند نهاية العمود P

مفتاح العمود DN 6885

TE perm. لا شيء جديد 468 648 824 1044 1448 1448 2226 2787
Φ32 Φ35 Φ40 Φ45 Φ50 Φ50 Φ55 Φ60
عند نهاية عمود Z

DIN 5480

TE perm. لا شيء جديد 912 912 1460 2190 3140 3140 3140 5780
و35 و35 عرض 40 عرض 45 عرض 50 عرض 50 عرض 50 عرض 60
عند نهاية عمود S

ANSI B92.1a-1976 (SAE J744)

TE perm. لا شيء جديد 314 602 602 1640 1640 1640 1640 1640
١ بوصة ١ وربع بوصة ١ وربع بوصة 1 3/4 بوصة 1 3/4 بوصة 1 3/4 بوصة 1 3/4 بوصة 1 3/4 بوصة
عند نهاية عمود T

ANSI B92.1a-1976 (SAE J744)

TE perm. لا شيء جديد 602 970 970 - - - 2670 4070
1 1/4 بوصة 1 3/8 بوصة 1 3/8 بوصة - - - 2 بوصة 2 1/4 بوصة
عزم الدوران عبر القيادة، الحد الأقصى.3) TD perm. لا شيء جديد 314 521 660 822 1110 1110 1760 2065

1) الكفاءة غير محسوبة

2) للعمود القيادة بدون قوة شعاعية

3) راقب عزم الإدخال الأقصى لعمود S!

توزيع العزم

تحديد القيمة الاسمية

تدفق qv=(Vg ∙ n ∙ ηv) / 1000 لتر/دقيقة
عزم الدوران T=(Vg ∙ Δp) / 20 ∙ π ∙ ηمم لا شيء جديد
طاقة P=(2π ∙ T ∙ n)/60000=(qv ∙ Δp)/600 ∙ ηt كيلوواط

Vg = الإزاحة لكل دورة بالديسيمتر3

Δp = الضغط التفريقي بالبار

n = السرعة بالدورة في الدقيقة

ηv = الكفاءة الحجمية

ηمم = الكفاءة الميكانيكية-الهيدروليكية

ηt = الكفاءة العامة (nt= nv* nمم)

A11VLO