A10VO Series 53 Variable Displacement Piston Pump

The A10VO Series 53 pump provides variable displacement through a swashplate rotary group for open-circuit systems. Its series number and control suffix are important: a similar A10VO pump body from another series does not establish the same interfaces or control response.

  • Open-circuit swashplate pump
  • Series 53 model identification
  • Electro-hydraulic pressure control
  • Power-control option
HOME › Hydraulikpumpen › A10VO Series 53

PRANCE HYDRAULIC · PRODUCT SERIES

A10VO Series 53 Variable Displacement Piston Pump

Axial piston; swashplate variable displacement · Open circuit

The A10VO Series 53 pump provides variable displacement through a swashplate rotary group for open-circuit systems. Its series number and control suffix are important: a similar A10VO pump body from another series does not establish the same interfaces or control response.

Model

✓cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
A10VO Series 53Axial piston; swashplate variable displacement
Request a QuotationTechnische Daten & Datenblatt anzeigen

Confirm the complete model and approved specification with Prance Hydraulic. Product-series references alone do not establish interchangeability.

Configuration review · Technical documentation · Product selection

Produktdetails

  • Open-circuit swashplate pump
  • Series 53 model identification
  • Electro-hydraulic pressure control
  • Power-control option

CATEGORIES: Kolbenpumpe, Verstellpumpe

A10VO Series 53 Features & Application

Open-circuit swashplate pump

Review normal running, startup and reversal where applicable. The pressure and flow requirements can differ between operating states.

Series 53 model identification

Include the series and all order-code suffixes in the enquiry. A common nominal size does not establish compatibility.

Electro-hydraulic pressure control

Match the complete control option and its command requirements to the existing controller. Similar housings can use different control arrangements.

Power-control option

Match the complete control option and its command requirements to the existing controller. Similar housings can use different control arrangements.

A10VO Series 53 Specifications

Series / modelA10VO Series 53
Product typeA10VO Series 53 Variable Displacement Piston Pump
DesignAxial piston; swashplate variable displacement
Circuit / selectionOpen circuit
Serie53
Published nominal-size table10, 18, 28, 45, 60, 63, 72, 85 and 100; confirm availability by series and control

A10VO Series 53 Selection & Configuration

The A10VO Series 53 pump provides variable displacement through a swashplate rotary group for open-circuit systems. Its series number and control suffix are important: a similar A10VO pump body from another series does not establish the same interfaces or control response.

For electrical pressure or power control, provide the command signal, supply requirements and required response together with the flow-pressure duty. Keep the Series 53 order code attached to the approved drawing when comparing Series 31, 32 or 52 alternatives.

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.

Hydraulic pumps · Hydraulic motors · Hydraulic valves

Send the A17FO Series 10 nameplate, operating requirements and installation drawing for a configuration review before quoting.

  • Model review — send the full model code or an existing nameplate photograph.
  • Interface matching — confirm shaft, mounting flange, rotation and ports.
  • Operating conditions — provide flow, pressure, speed, fluid and duty cycle.
  • Documentation — request the relevant product data and drawings for your review.
Prance workshop with a row of production equipment

A10VO Series 53 Buying Guide

Use this sequence to prepare the A10VO Series 53 configuration for review and quotation.

  1. Define required flow at the actual drive speed and continuous pressure.
  2. Identify peak pressure, duration and the work cycle.
  3. Confirm the selected displacement control and any auxiliary-drive requirement.
  4. Match rotation viewed from the shaft end, shaft, flange and ports.
  5. Review inlet conditions, drain routing and the installation envelope.
  6. Confirm fluid, viscosity, temperature, filtration and seals.
  7. Approve the complete model, control, drawing, quantity and delivery terms.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

Selection, Documentation & Project Support

Prance technical team image from its company website

Selection Support

Learn more →

Share your hydraulic circuit, operating point and installation requirements for a configuration discussion.


Flow · Pressure · Speed · Interfaces
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

Technical Resources

Learn more →

Review product documentation, model codes and technical data before finalizing the specification.


Datasheets · Model codes · Drawings
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

Project Inquiries

Learn more →

Send your required model, quantity, application and project requirements to discuss your inquiry.


Product inquiries · Configuration review

Configuration, Quantity & Delivery

Confirm the complete A17FO Series 10 code, approved drawing and operating limits. Availability, quantity, documentation and delivery date are confirmed in the quotation.

Discuss Your A10VO Series 53 Application

Send the full model code, operating duty, installation details and quantity.

Request a A10VO Series 53 Quotation

A10VO Series 53 Questions Before Ordering

What type of product is the A10VO Series 53?

A10VO Series 53 Variable Displacement Piston Pump. Design: Axial piston; swashplate variable displacement. Open circuit. Confirm the complete order code for the offered version.

Can a similar pump replace the A10VO Series 53?

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

Define required flow at the actual drive speed and continuous pressure. Identify peak pressure, duration and the work cycle. Attach the nameplate, complete order code, installation drawing and required quantity.

A10VO Series 53 Technical Data & Documents

View A10VO Series 53 catalog data and operating conditions

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.

Technische Daten

Größe NG 10 18 28 45 60 63 72 85 100
Geometrisches Fördervolumen pro Umdrehung Vg Max cm3 10.5 18 28 45 60 63 72 85 100
Rotational speed maximum1) bei VG-Max nnom U/min 3600 3300 3000 26004) 2700 2600 2600 2500 2300
bei Vg <Vg Max 2) nmax. Zul. U/min 4320 3960 3600 3120 3140 3140 3140 3000 2500
Fluss unter nnom und VG-Max qv l/min 37 59 84 117 162 163 187 212 230
unter nE = 1500 U/min qvE l/min 15 27 42 68 90 95 108 128 150
Macht Mit Nnom, VG-Max und Δp = 250 bar P kW 16 25 35 49 65 68 77 89 96
unter nE= 1500 U/min PE kW 7 11 18 28 37 39 45 53 62
Drehmoment bei VG-Max und Δp = 250 bar M Machs gut 42 71 111 179 238 250 286 338 398
bei VG-Max und Δp = 100 bar M Machs gut 17 29 45 72 95 100 114 135 159
Drehsteifigkeit Antriebswelle S c Nm/rad 9200 11000 22300 37500 65500 65500 65500 143000 143000
R c Nm/rad – 14800 26300 41000 69400 69400 69400 152900 152900
U c Nm/rad 6800 8000 16700 30000 49200 49200 49200 102900 102900
W c Nm/rad – – 19900 34400 54000 54000 54000 117900 117900
P c Nm/rad 10700 – – – – – – – –
Trägheitsmoment der Triebwerksgruppe JTW Kgm2 0.0006 0.0009 0.0017 0.003 0.0056 0.0056 0.0056 0.012 0.012
Maximale Winkelbeschleunigung3) α rad/s2 8000 6800 5500 4000 3300 3300 3300 2700 2700
Fallzahl V L 0.2 0.25 0.3 0.5 0.8 0.8 0.8 1 1
Weight without through drive (approx.) Weight with through drive (approx.) m kg 8 11.5 15 18 22 22 22 36 36
– 13 18 24 28 28 28 45 45

Bestimmung der Betriebskennlinien

Key Vg  Fördervolumen pro Umdrehung in [cm3] Δp  Differential pressure [bar] n   Rotational speed [rpm] ηv   Volumetric efficiency ηhm  Hydraulic-mechanical efficiency ηt   Gesamtwirkungsgrad (ηt= ηv*ηhm) 1) The values are applicable: – At an abs. pressure pABS = 1 bar at the suction port S – for the optimum viscosity range from Ventscheiden = 36 bis 16 mm2/s – with hydraulic fluid on the basis of mineral oils 2)Siehe Diagramm auf Seite 9 bei einer Geschwindigkeitserhöhung bis zu nmax adm. 3)Die Daten gelten für Werte zwischen der minimal erforderlichen und der maximal zulässigen Drehzahl. Sie gilt für externe Anregungen (z. B. Dieselmotor das 2- bis 8-fache der Drehfrequenz, Kardanwelle das doppelte der Drehfrequenz). Der Grenzwert gilt nur für eine einzelne Pumpe. Die Belastbarkeit der Verbindungsteile muss berücksichtigt werden.

Zulässige Radial- und Axialkräfte auf die Antriebswelle

Größe NG 10 18 28 45 60/63 72 85 100
Maximale Radialkraft bei a/2 A10VO Series 53 technical reference from the existing product documentation Radiale Kraft FQ-max N 250 350 1200 1500 1700 1500 2000 2000
Maximale Axialkraft A10VO Series 53 technical reference from the existing product documentation Axialkraft ±FAch, Max N 400 700 1000 1500 2000 1500 3000 3000

Zulässige Eingangs- und Durchtriebsdrehmomente

Größe 10 18 28 45 60/63 72 85 100
Maximales Eingangsdrehmoment an der Antriebswelle2)
S ME max Machs gut 126 124 198 319 630 630 1157 1157
∅ in 3/4 3/4 7/8 1 1 1/4 1 1/4 1 1/2 1 1/2
R ME max Machs gut – 160 250 400 650 650 1215 1215
∅ in – 3/4 7/8 1 1 1/4 1 1/4 1 1/2 1 1/2
U ME max Machs gut 60 59 105 188 306 306 628 628
∅ in 5/8 5/8 3/4 7/8 1 1 1 1/4 1 1/4
W ME max Machs gut – – 140 220 396 383 650 650
∅ in – – 3/4 7/8 1 1 1 1/4 1 1/4
P ME max Machs gut 90 – – – – – – –
∅ mm 18 – – – – – – –
Maximales Durchtriebsdrehmoment
S MD max Machs gut – 108 160 319 484 484 698 698
R MD max Machs gut – 120 176 365 484 484 698 –
U MD max Machs gut – 59 105 188 306 306 628 628
W MD max Machs gut – – 140 220 396 383 650 650

Drehmomentverteilung

  A10VO Series 53 technical reference from the existing product documentation
Eingangsdrehmoment ME=M1+M2+M3
ME < ME max
Durchtriebsdrehmoment MD=M2+M3
MD < MD max
1)Effizienz nicht berücksichtigt 2) Für Gelenkwellen ohne Radialkraft
Watch A10VO Series 53 Product Video
A10VO Series 53 product video

Request a A10VO Series 53 Quotation

Tell us your required configuration, quantity and application.

Kontaktformular-Demo
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

Technische Daten

Größe NG 10 18 28 45 60 63 72 85 100
Geometrisches Fördervolumen pro Umdrehung Vg Max cm3 10.5 18 28 45 60 63 72 85 100
Drehzahl

Maximum1)

bei VG-Max nnom U/min 3600 3300 3000 26004) 2700 2600 2600 2500 2300
bei Vg <Vg Max 2) nmax. Zul. U/min 4320 3960 3600 3120 3140 3140 3140 3000 2500
Fluss unter nnom und VG-Max qv l/min 37 59 84 117 162 163 187 212 230
unter nE = 1500 U/min qvE l/min 15 27 42 68 90 95 108 128 150
Macht Mit Nnom, VG-Max

und Δp = 250 bar

P kW 16 25 35 49 65 68 77 89 96
unter nE= 1500 U/min PE kW 7 11 18 28 37 39 45 53 62
Drehmoment bei VG-Max

und Δp = 250 bar

M Machs gut 42 71 111 179 238 250 286 338 398
bei VG-Max

und Δp = 100 bar

M Machs gut 17 29 45 72 95 100 114 135 159
Drehsteifigkeit Antriebswelle S c Nm/rad 9200 11000 22300 37500 65500 65500 65500 143000 143000
R c Nm/rad - 14800 26300 41000 69400 69400 69400 152900 152900
U c Nm/rad 6800 8000 16700 30000 49200 49200 49200 102900 102900
W c Nm/rad - - 19900 34400 54000 54000 54000 117900 117900
P c Nm/rad 10700 - - - - - - - -
Trägheitsmoment der Triebwerksgruppe JTW Kgm2 0.0006 0.0009 0.0017 0.003 0.0056 0.0056 0.0056 0.012 0.012
Maximale Winkelbeschleunigung3) α rad/s2 8000 6800 5500 4000 3300 3300 3300 2700 2700
Fallzahl V L 0.2 0.25 0.3 0.5 0.8 0.8 0.8 1 1
Gewicht ohne Durchtrieb (ca.)

Gewicht mit Durchtrieb (ca.)

m kg 8 11.5 15 18 22 22 22 36 36
- 13 18 24 28 28 28 45 45

Bestimmung der Betriebskennlinien

Fluss qv=(Vg ∙ n ∙ ηv) / 1000 l/min
Drehmoment M=(Vg ∙ Δp) /(20 ∙ π ∙ ηhm) Machs gut
Macht P=(2π ∙ M ∙ n)/60000=(qv ∙ Δp)/(600 ∙ ηt)  kW

Schlüssel

Vg  Fördervolumen pro Umdrehung in [cm3]

Δp Differenzdruck [bar]

n Drehzahl [U/min]

ηv   Volumetrischer Wirkungsgrad

ηhm  Hydraulisch-mechanischer Wirkungsgrad

ηt   Gesamtwirkungsgrad (ηt= ηv*ηhm)

1) Die Werte gelten:

- Bei einem absolutem Druck pABS = 1 bar am Sauganschluss S

- für den optimalen Viskositätsbereich von Ventscheiden = 36 bis 16 mm2/s

- mit Hydraulikflüssigkeit auf Basis von Mineralölen

2)Siehe Diagramm auf Seite 9 bei einer Geschwindigkeitserhöhung bis zu nmax adm.

3)Die Daten gelten für Werte zwischen der minimal erforderlichen und der maximal zulässigen Drehzahl. Sie gilt für externe Anregungen (z. B. Dieselmotor das 2- bis 8-fache der Drehfrequenz, Kardanwelle das doppelte der Drehfrequenz). Der Grenzwert gilt nur für eine einzelne Pumpe. Die Belastbarkeit der Verbindungsteile muss berücksichtigt werden.

Zulässige Radial- und Axialkräfte auf die Antriebswelle

Größe NG 10 18 28 45 60/63 72 85 100
Maximale Radialkraft bei a/2

Radiale Kraft

FQ-max N 250 350 1200 1500 1700 1500 2000 2000
Maximale Axialkraft

Axialkraft

±FAch, Max N 400 700 1000 1500 2000 1500 3000 3000

Zulässige Eingangs- und Durchtriebsdrehmomente

Größe 10 18 28 45 60/63 72 85 100
Drehmoment bei VG-Max und Δp = 250 bar1) MMax Machs gut 42 71 111 179 250 321 338 398
Maximales Eingangsdrehmoment an der Antriebswelle2)
S ME max Machs gut 126 124 198 319 630 630 1157 1157
∅ in 3/4 3/4 7/8 1 1 1/4 1 1/4 1 1/2 1 1/2
R ME max Machs gut - 160 250 400 650 650 1215 1215
∅ in - 3/4 7/8 1 1 1/4 1 1/4 1 1/2 1 1/2
U ME max Machs gut 60 59 105 188 306 306 628 628
∅ in 5/8 5/8 3/4 7/8 1 1 1 1/4 1 1/4
W ME max Machs gut - - 140 220 396 383 650 650
∅ in - - 3/4 7/8 1 1 1 1/4 1 1/4
P ME max Machs gut 90 - - - - - - -
∅ mm 18 - - - - - - -
Maximales Durchtriebsdrehmoment
S MD max Machs gut - 108 160 319 484 484 698 698
R MD max Machs gut - 120 176 365 484 484 698 -
U MD max Machs gut - 59 105 188 306 306 628 628
W MD max Machs gut - - 140 220 396 383 650 650

Drehmomentverteilung

 

Drehmoment an der 1. Pumpe M1
Drehmoment an der 2. Pumpe M2
Drehmoment an der 3. Pumpe M3
Eingangsdrehmoment ME=M1+M2+M3
ME < ME max
Durchtriebsdrehmoment MD=M2+M3
MD < MD max

1)Effizienz nicht berücksichtigt

2) Für Gelenkwellen ohne Radialkraft

A10VO Serie 53