Wenzhou Prance Hydraulic Equipment Co., Ltd.
PVE Open Circuit Variable Piston Pump
The PVE open-circuit piston pump uses a variable swashplate arrangement. The existing table distinguishes PVE012, PVE19 and PVE21 and includes different pressure and input-speed ratings, so the selected model must remain attached to its own values.
- Swashplate displacement adjustment
- Existing table distinguishes PVE012, PVE19 and PVE21
- Pump-specific case-fill instructions
- Separate inlet, outlet and drain limits
PRANCE HYDRAULIC · PRODUCT SERIES
Axial piston; swashplate variable displacement · Open circuit
The PVE open-circuit piston pump uses a variable swashplate arrangement. The existing table distinguishes PVE012, PVE19 and PVE21 and includes different pressure and input-speed ratings, so the selected model must remain attached to its own values.
Model

Confirm the complete model and approved specification with Prance Hydraulic. Product-series references alone do not establish interchangeability.
Configuration review · Technical documentation · Product selection
Detalles del producto
- Swashplate displacement adjustment
- Existing table distinguishes PVE012, PVE19 and PVE21
- Pump-specific case-fill instructions
- Separate inlet, outlet and drain limits
CATEGORIES: Bomba de desplazamiento variable, Bomba de pistón
PVE Features & Application
Swashplate displacement adjustment
Specify the full MS order code, installation drawing and operating duty so the quotation can identify the proposed configuration.
Existing table distinguishes PVE012, PVE19 and PVE21
Specify the full MS order code, installation drawing and operating duty so the quotation can identify the proposed configuration.
Pump-specific case-fill instructions
Compare the required flow at the actual drive speed and pressure. Check the selected variant rather than combining maxima from different rows.
Separate inlet, outlet and drain limits
Keep continuous, intermittent and peak conditions separate. Use the row for the selected size and configuration.
PVE Specifications
| Series / model | PVE |
|---|---|
| Product type | PVE Open Circuit Variable Piston Pump |
| Diseño | Axial piston; swashplate variable displacement |
| Circuit / selection | Open circuit |
| Published models | PVE012, PVE19 and PVE21 |
| Listed displacement | 25, 41 and 45 cm³/rev respectively |
| Published speed/pressure rows | 3000 rpm / 210 bar; 2400 rpm / 210 bar; 2400 rpm / 186 bar respectively; confirm applicable conditions |
PVE Selection & Configuration
The PVE open-circuit piston pump uses a variable swashplate arrangement. The existing table distinguishes PVE012, PVE19 and PVE21 and includes different pressure and input-speed ratings, so the selected model must remain attached to its own values.
Review the drain route as part of the installation, not after the pump is selected. The existing startup instructions require case filling and a drain connection to the reservoir. Confirm the approved mounting position and steady case-pressure limit for the supplied unit.

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
Hydraulic pumps · Hydraulic motors · Hydraulic valves
Send the MS nameplate, operating requirements and installation drawing for a configuration review before quoting.
- Model review — send the full model code or an existing nameplate photograph.
- Interface matching — confirm shaft, mounting flange, rotation and ports.
- Operating conditions — provide flow, pressure, speed, fluid and duty cycle.
- Documentation — request the relevant product data and drawings for your review.

PVE Buying Guide
Use this sequence to prepare the PVE configuration for review and quotation.
- Define required flow at the actual drive speed and continuous pressure.
- Identify peak pressure, duration and the work cycle.
- Confirm the selected displacement control and any auxiliary-drive requirement.
- Match rotation viewed from the shaft end, shaft, flange and ports.
- Review inlet conditions, drain routing and the installation envelope.
- Confirm fluid, viscosity, temperature, filtration and seals.
- Approve the complete model, control, drawing, quantity and delivery terms.

Selection, Documentation & Project Support

Selection Support
Learn more →Share your hydraulic circuit, operating point and installation requirements for a configuration discussion.
Flow · Pressure · Speed · Interfaces

Technical Resources
Learn more →Review product documentation, model codes and technical data before finalizing the specification.
Datasheets · Model codes · Drawings

Project Inquiries
Learn more →Send your required model, quantity, application and project requirements to discuss your inquiry.
Product inquiries · Configuration review
Configuration, Quantity & Delivery
Confirm the complete MS code, approved drawing and operating limits. Availability, quantity, documentation and delivery date are confirmed in the quotation.
Discuss Your PVE Application
Send the full model code, operating duty, installation details and quantity.
Request a PVE QuotationPVE Questions Before Ordering
What type of product is the PVE?
PVE Open Circuit Variable Piston Pump. Design: Axial piston; swashplate variable displacement. Open circuit. Confirm the complete order code for the offered version.
Can a similar pump replace the PVE?
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
Define required flow at the actual drive speed and continuous pressure. Identify peak pressure, duration and the work cycle. Attach the nameplate, complete order code, installation drawing and required quantity.
PVE Technical Data & Documents
View PVE catalog data and operating conditions
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
Datos técnicos
Preparación para el arranque
Antes de poner en marcha una bomba PVE, llene la carcasa a través del puerto de drenaje superior con líquido hidráulico limpio del sistema. La línea de drenaje de la carcasa debe conectarse al depósito por debajo del nivel de aceite. Para disposiciones de bombas múltiples que incluyan secciones que no sean PVE, también se deben considerar los requisitos de las unidades que no sean PVE.Montaje
Eaton Hydraulics recomienda que estas bombas de pistones de la serie PVE se monten horizontalmente.CLASIFICACIONES DE DESPLAZAMIENTO, VELOCIDAD Y PRESIÓN
| Sistema de numeración de modelos | Desplazamiento cm3En (in3/r) | Velocidad de entrada nominal | Presión máxima bar (psi) | ||
| Bomba de extremo de eje | Bomba de extremo de cubierta | (A una entrada de 0 psig) | Extremo del eje | Contraportada | |
| PVE012 | 25(1.54) | - | 3000 | 210(3000) | - |
| PVE19 | 41 (2.50) | - | 2400 | 210(3000) | - |
| PVE21 | 45 (2.75) | - | 2400 | 186(2700) | - |
LÍMITES DE PRESIÓN
| Puerto | Rango de presión |
| Entrada** | 0,2 bar a 2,0 bar (5 pulg. Hg de vacío a 30 psi) |
| Outlet | Ver las presiones máximas enumeradas anteriormente |
| Drenaje* | 0,35 bar (5 psig) máximo |
Watch PVE Product Video
Related Selection Resources
Request a PVE Quotation
Tell us your required configuration, quantity and application.
Datos técnicos
Preparación para el arranque
Antes de poner en marcha una bomba PVE, llene la carcasa a través del puerto de drenaje superior con líquido hidráulico limpio del sistema. La línea de drenaje de la carcasa debe conectarse al depósito por debajo del nivel de aceite. Para disposiciones de bombas múltiples que incluyan secciones que no sean PVE, también se deben considerar los requisitos de las unidades que no sean PVE.
Montaje
Eaton Hydraulics recomienda que estas bombas de pistones de la serie PVE se monten horizontalmente.
CLASIFICACIONES DE DESPLAZAMIENTO, VELOCIDAD Y PRESIÓN
| Sistema de numeración de modelos | Desplazamiento cm3En (in3/r) | Velocidad de entrada nominal | Presión máxima bar (psi) | ||
| Bomba de extremo de eje | Bomba de extremo de cubierta | (A una entrada de 0 psig) | Extremo del eje | Contraportada | |
| PVE012 | 25(1.54) | - | 3000 | 210(3000) | - |
| PVE19 | 41 (2.50) | - | 2400 | 210(3000) | - |
| PVE21 | 45 (2.75) | - | 2400 | 186(2700) | - |
*El producto sombreado puede no estar disponible
LÍMITES DE PRESIÓN
| Puerto | Rango de presión |
| Entrada** | 0,2 bar a 2,0 bar (5 pulg. Hg de vacío a 30 psi) |
| Outlet | Ver las presiones máximas enumeradas anteriormente |
| Drenaje* | 0,35 bar (5 psig) máximo |
*La válvula de alivio integrada protege la bomba al limitar los picos de presión en la carcasa a 0,7 bar
(10 psi) por encima de la presión de entrada. El flujo de la válvula regresa directamente a la entrada de la bomba.
Línea de drenaje de la caja requerida para limitar la presión de la caja en estado estacionario.
** Detalles de velocidad.
Solo para unidades no integradas




-1.webp)


