Wenzhou Prance Hydraulic Equipment Co., Ltd
A20VO Variable Displacement Double Piston Pump
The A20VO is a variable double pump with two axial piston rotary groups. Each group supplies a hydraulic function, while the common drive must carry the combined power and torque demand.
- Two variable axial piston rotary groups
- Mobile and stationary applications
- Size-dependent suction or charging arrangement
- Controls selected for the two-pump duty
PRANCE HYDRAULIC · PRODUCT SERIES
Two axial piston rotary groups; variable swashplate · Open circuit
The A20VO is a variable double pump with two axial piston rotary groups. Each group supplies a hydraulic function, while the common drive must carry the combined power and torque demand.
Modèle

Confirm the complete model and approved specification with Prance Hydraulic. Product-series references alone do not establish interchangeability.
Étude de configuration · Documentation technique · Sélection de produits
Détails du produit
- Two variable axial piston rotary groups
- Mobile and stationary applications
- Size-dependent suction or charging arrangement
- Controls selected for the two-pump duty
CATÉGORIES : Pompe à piston, Pompe à cylindrée variable
A20VO Features & Application
Two variable axial piston rotary groups
Specify the displacement range or switching arrangement and verify performance at each required setting.
Mobile and stationary applications
Specify the full MS order code, installation drawing and operating duty so the quotation can identify the proposed configuration.
Size-dependent suction or charging arrangement
Include the series and all order-code suffixes in the enquiry. A common nominal size does not establish compatibility.
Controls selected for the two-pump duty
Match the complete control option and its command requirements to the existing controller. Similar housings can use different control arrangements.
A20VO Specifications
| Series / model | A20VO |
|---|---|
| Product type | A20VO Variable Displacement Double Piston Pump |
| Conception | Two axial piston rotary groups; variable swashplate |
| Circuit / selection | Circuit ouvert |
| Published nominal sizes | 60, 95, 190, 260 and 520 |
| Displacement convention | Per rotary group; see the table conditions |
| Charging arrangement | Size and version dependent; confirm A20VO or charged variant |
A20VO Selection & Configuration
The A20VO is a variable double pump with two axial piston rotary groups. Each group supplies a hydraulic function, while the common drive must carry the combined power and torque demand.
Specify flow and pressure for each outlet and identify which demands occur simultaneously. Distinguish self-priming and charge-pump versions in the order code. A displacement value given per rotary group is not the total displacement of both groups.

Your Application.
The Right Configuration.
Hydraulic pumps · Hydraulic motors · Hydraulic valves
Send the MS nameplate, operating requirements and installation drawing for a configuration review before quoting.
- Model review — send the full model code or an existing nameplate photograph.
- Interface matching — confirm shaft, mounting flange, rotation and ports.
- Operating conditions — provide flow, pressure, speed, fluid and duty cycle.
- Documentation — request the relevant product data and drawings for your review.

A20VO Buying Guide
Use this sequence to prepare the A20VO configuration for review and quotation.
- Define required flow at the actual drive speed and continuous pressure.
- Identify peak pressure, duration and the work cycle.
- Confirm the selected displacement control and any auxiliary-drive requirement.
- Match rotation viewed from the shaft end, shaft, flange and ports.
- Review inlet conditions, drain routing and the installation envelope.
- Confirm fluid, viscosity, temperature, filtration and seals.
- Approve the complete model, control, drawing, quantity and delivery terms.

Selection, Documentation & Project Support

Selection Support
Learn more →Share your hydraulic circuit, operating point and installation requirements for a configuration discussion.
Flow · Pressure · Speed · Interfaces

Technical Resources
Learn more →Review product documentation, model codes and technical data before finalizing the specification.
Datasheets · Model codes · Drawings

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
Learn more →cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
Configuration, Quantity & Delivery
Confirm the complete MS code, approved drawing and operating limits. Availability, quantity, documentation and delivery date are confirmed in the quotation.
Discuss Your A20VO Application
Send the full model code, operating duty, installation details and quantity.
Request a A20VO QuotationA20VO Questions Before Ordering
What type of product is the A20VO?
A20VO Variable Displacement Double Piston Pump. Design: Two axial piston rotary groups; variable swashplate. Open circuit. Confirm the complete order code for the offered version.
Can a similar pump replace the A20VO?
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
Define required flow at the actual drive speed and continuous pressure. Identify peak pressure, duration and the work cycle. Attach the nameplate, complete order code, installation drawing and required quantity.
A20VO Technical Data & Documents
View A20VO catalog data and operating conditions
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
Données techniques
Tableau de valeurs (valeurs théoriques, sans efficacités ηhm et ηv; valeurs arrondies)
| Taille | sans pompe de charge | 60 | 95 | 520 | |||
| avec pompe de charge | 190 | 260 | |||||
| Displacement (per rotary group) | VGmax | cm3 | 60 | 93,8 | 192,7 | 260 | 520 |
| Vsol mineur | cm3 | 0 | 0 | 0 | 0 | 0 | |
| Speed maximal 1) à Vgmax | |||||||
| nmax | min–1 | 2700 | 2350 | 25002) | 25002) | 1450 | |
| Vitesse max. 3) à Vg ≤VGmax | |||||||
| nmax | min–1 | 3200 | 2780 | 2500 | 2300 | 1720 | |
| Flow at nmonx et Vg max | |||||||
| qvmax | L/min | 2×162 | 2×220 | 2×482 | 2×598 | 2×754 | |
| Puissance à qv monx et Δp = 350 bar | |||||||
| Pmax | kW | 1354) | 257 | 562 | 689 | 880 | |
| Couple à VGiga at long-term (Δp = 350 bar) max. perm., short term (Δp = 400 bar) | |||||||
| Tmax | Rien | 4774) | 1045 | 2147 | 2897 | 5793 | |
| Tmax | Rien | 6024) | 1194 | 2454 | 3310 | 6621 | |
| Moment d'inertie (des pièces en rotation) | J | kgm2 | 0,0113 | 0,0346 | 0,0604 | 0,0912 | 0,696 |
| Masse approx. | m | kg | 44 | 640 | |||
Watch A20VO Product Video
Related Selection Resources
Request a A20VO Quotation
Tell us your required configuration, quantity and application.
Code de commande / Programme standard
| A20V | ○ | / | 10 | - | |||||||||
| 01 | 02 | 03 | 04 | 05 | 06 | 07 | 08 | 09 | 10 | 110 | 12 |
Unité à pistons axiaux
01 |
Conception à plateau incliné, variable (conception en face à face) |
A20V |
Pompe de charge (turbine)
| 60 | 95 | 190 | 260 | 520 | |||
| 02 | sans pompe de charge | ● | ● | - | - | ● | |
| avec pompe de charge | - | - | ● | ● | - | L | |
Opération
| 03 | Double pompe, circuit ouvert | ○ |
Taille
| 04 | ≈Débit Vg maxen cm3(par groupe rotatif) | 60 | 95 | 190 | 260 | 520 |
Dispositifs de contrôle
| 60 | 95 | 190 | 260 | 520 | ||
| 05 | voir RE 92703 (A10VO/53) | ● | - | - | - | - |
| voir RE 92500 (A11VO) | - | ● | ● | ● | - | |
| voir RE 92050 (A4VSO) et RE 92060, RE 92064, RE 92076 | - | - | - | - | ● | |
Séries
| 06 | Série 1, Index 0 | 10 |
Sens de rotation
| 07 | vue sur l'extrémité de l'arbre | dans le sens des aiguilles d'une montre | R |
| dans le sens inverse des aiguilles d'une montre | L |
Joints d'étanchéité
| 08 | NBR (caoutchouc nitrile), anneau d'étanchéité d'arbre en FKM (caoutchouc fluoré) | ● | ● | ● | ● | - | N |
| FKM (caoutchouc fluoré) | - | - | - | - | ● | V |
Extrémité de l'arbre
| 60 | 95 | 190 | 260 | 520 | |||
| 10 | Arbre à splines DIN 5480 | - | ● | ● | ● | ● | Z |
| Arbre à splines, ANSI B92.1a-1976 | ● | ● | - | - | - | S | |
| - | - | ● | ● | - | T | ||
| Arbre à clavette parallèle, DIN 6885 | - | - | - | - | ● | P | |
Bride de fixation
| 60 | 95 | 190 | 260 | 520 | |||
| 09 | SAEJ744-4 trous | ● | ● | ● | ● | - | D |
| Pour adapter le boîtier de volant moteur (conforme à SAE J617)
de moteur à combustion interne (détails sur demande) |
- | ● | ● | - | - | G | |
| SO3019-2-8 trous | - | - | - | ● | H | ||
Ports de ligne de service
| 60 | 95 | 190 | 260 | 520 | |||
| 11 | Deux ports de ligne de service et un port d'aspiration sur site,
en face (filetage de fixation métrique) |
● | ● | ● | ● | - | 24 |
| Sur le site, deux ports de ligne de service chacun, en face, et un port d'aspiration décalé de 90° (filetage de fixation métrique) | - | - | - | - | ● | 26 | |
Pompe de surpression et entraînement par traversée1)
| 60 | 95 | 190 | 260 | 520 | |||||
| 12 | sans pompe de surpression, sans entraînement par traversée | ● | ● | ● | ● | - | N00 | ||
| sans pompe de surpression, avec entraînement par traversée | |||||||||
| Bride SAE J744 | Noyau d'arbre à splines | ||||||||
| 82-2 (A) | 5/8 pouce | 9T 16/32DP (A) | ○ | ○ | ○ | ○ | - | K01 | |
| 127-2(C) | 1 1/4 po | 14T 12/24DP (C) | - | - | - | - | ● | K07 | |
| avec arbre d'entraînement traversant, sans moyeu, sans bride intermédiaire, fermé par un couvercle | - | - | - | - | ● | K99 | |||
•=disponible ○= disponible sur demande -=non disponible
1)Veuillez nous contacter
Données techniques
Tableau de valeurs (valeurs théoriques, sans efficacités ηhm et ηv; valeurs arrondies)
| Taille | sans pompe de charge | 60 | 95 | 520 | |||
| avec pompe de charge | 190 | 260 | |||||
| Déplacement
(par groupe rotatif) |
VGmax | cm3 | 60 | 93,8 | 192,7 | 260 | 520 |
| Vsol mineur | cm3 | 0 | 0 | 0 | 0 | 0 | |
| Vitesse
maximal 1) à Vgmax |
|||||||
| nmax | min-1 | 2700 | 2350 | 25002) | 25002) | 1450 | |
| Vitesse max. 3)
à Vg ≤VGmax |
|||||||
| nmax | min-1 | 3200 | 2780 | 2500 | 2300 | 1720 | |
| Flux
à nmonx et Vg max |
|||||||
| qvmax | L/min | 2x162 | 2x220 | 2x482 | 2x598 | 2x754 | |
| Puissance à qv monx
et Δp = 350 bar |
|||||||
| Pmax | kW | 1354) | 257 | 562 | 689 | 880 | |
| Couple à VGiga
à long terme (Δp = 350 bar) max. perm., court terme (Δp = 400 bar) |
|||||||
| Tmax | Rien | 4774) | 1045 | 2147 | 2897 | 5793 | |
| Tmax | Rien | 6024) | 1194 | 2454 | 3310 | 6621 | |
| Moment d'inertie (des pièces en rotation) | J | kgm2 | 0,0113 | 0,0346 | 0,0604 | 0,0912 | 0,696 |
| Masse approx. | m | kg | 44 | 640 | |||
1)Les valeurs sont indiquées pour une pression absolue (pabs) de 1 bar à la prise d'aspiration S et fluide de fonctionnement minéral
2)Les valeurs sont indiquées pour une pression absolue (Pabdos) d'au moins 0,8 bar à la prise d'aspiration S et fluide de fonctionnement minéral.
3)Les valeurs sont indiquées pour Vg <VGmax ou augmentation de la pression d'entrée Pabdos à la prise d'aspiration S.
4) Δp = 250 bar (opération à long terme) ou plutôt 315 bar (court terme).





-2.webp)

-2-1.webp)