A10VSO Series 52 Variable Piston Pump

The A10VSO Series 52 page covers an open-circuit variable displacement pump. Keep the Series 52 identity in the request and compare the exact control, shaft and ports; a Series 53 photograph or a similar displacement does not establish a replacement.

  • Series 52 model reference
  • Open-circuit swashplate pump
  • Variable displacement flow
  • Control and interface selection by full code
ACCUEIL › Pompes hydrauliques › A10VSO Series 52

PRANCE HYDRAULIC · PRODUCT SERIES

A10VSO Series 52 Variable Piston Pump

Axial piston; variable swashplate · Open circuit

The A10VSO Series 52 page covers an open-circuit variable displacement pump. Keep the Series 52 identity in the request and compare the exact control, shaft and ports; a Series 53 photograph or a similar displacement does not establish a replacement.

Modèle

✓A10VSO Series 52 original product photograph
A10VSO Series 52Axial piston; variable swashplate
Demander un devisVoir les données techniques et la fiche technique

Confirm the complete model and approved specification with Prance Hydraulic. Product-series references alone do not establish interchangeability.

Étude de configuration · Documentation technique · Sélection de produits

Détails du produit

  • Series 52 model reference
  • Open-circuit swashplate pump
  • Variable displacement flow
  • Control and interface selection by full code

CATÉGORIES : Pompe à piston, Pompe à cylindrée variable

A10VSO Series 52 Features & Application

Series 52 model reference

Include the series and all order-code suffixes in the enquiry. A common nominal size does not establish compatibility.

Open-circuit swashplate pump

Review normal running, startup and reversal where applicable. The pressure and flow requirements can differ between operating states.

Variable displacement flow

Specify the displacement range or switching arrangement and verify performance at each required setting.

Control and interface selection by full code

Match the complete control option and its command requirements to the existing controller. Similar housings can use different control arrangements.

A10VSO Series 52 Specifications

Series / modelA10VSO Series 52
Product typeA10VSO Series 52 Variable Piston Pump
ConceptionAxial piston; variable swashplate
Circuit / selectionCircuit ouvert
Séries52
Published family nominal-size table10, 18, 28, 45, 60, 63, 72, 85 and 100; availability is configuration-specific

A10VSO Series 52 Selection & Configuration

The A10VSO Series 52 page covers an open-circuit variable displacement pump. Keep the Series 52 identity in the request and compare the exact control, shaft and ports; a Series 53 photograph or a similar displacement does not establish a replacement.

Select the displacement from the required flow at the working speed and review the full pressure-duty cycle. Confirm which sizes and controls are offered for the exact A10VSO Series 52 code, rather than treating a combined series table as an availability list.

A10VSO Series 52 original product view

Your Application.
The Right Configuration.

Hydraulic pumps · Hydraulic motors · Hydraulic valves

Send the A17FO Series 10 nameplate, operating requirements and installation drawing for a configuration review before quoting.

  • Model review — send the full model code or an existing nameplate photograph.
  • Interface matching — confirm shaft, mounting flange, rotation and ports.
  • Operating conditions — provide flow, pressure, speed, fluid and duty cycle.
  • Documentation — request the relevant product data and drawings for your review.
Prance workshop with a row of production equipment

A10VSO Series 52 Buying Guide

Use this sequence to prepare the A10VSO Series 52 configuration for review and quotation.

  1. Define required flow at the actual drive speed and continuous pressure.
  2. Identify peak pressure, duration and the work cycle.
  3. Confirm the selected displacement control and any auxiliary-drive requirement.
  4. Match rotation viewed from the shaft end, shaft, flange and ports.
  5. Review inlet conditions, drain routing and the installation envelope.
  6. Confirm fluid, viscosity, temperature, filtration and seals.
  7. Approve the complete model, control, drawing, quantity and delivery terms.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

Selection, Documentation & Project Support

Prance technical team image from its company website

Selection Support

Learn more →

Share your hydraulic circuit, operating point and installation requirements for a configuration discussion.


Flow · Pressure · Speed · Interfaces
Prance quality standards image from its company website

Technical Resources

Learn more →

Review product documentation, model codes and technical data before finalizing the specification.


Datasheets · Model codes · Drawings
Prance sales team image from its company website

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

Learn more →

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.


cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

Configuration, Quantity & Delivery

Confirm the complete A17FO Series 10 code, approved drawing and operating limits. Availability, quantity, documentation and delivery date are confirmed in the quotation.

Discuss Your A10VSO Series 52 Application

Send the full model code, operating duty, installation details and quantity.

Request a A10VSO Series 52 Quotation

A10VSO Series 52 Questions Before Ordering

What type of product is the A10VSO Series 52?

A10VSO Series 52 Variable Piston Pump. Design: Axial piston; variable swashplate. Open circuit. Confirm the complete order code for the offered version.

Can a similar pump replace the A10VSO Series 52?

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

Define required flow at the actual drive speed and continuous pressure. Identify peak pressure, duration and the work cycle. Attach the nameplate, complete order code, installation drawing and required quantity.

A10VSO Series 52 Technical Data & Documents

View A10VSO Series 52 catalog data and operating conditions

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.

Données techniques

Taille NG 10 18 28 45 60 63 72 85 100
Cylindrée géométrique par tour Vg max cm3 10.5 18 28 45 60 63 72 85 100
Rotational speed maximum1) à VGiga nnom tours par minute 3600 3300 3000 26004) 2700 2600 2600 2500 2300
à Vg <Vg max 2) nadm. max. tours par minute 4320 3960 3600 3120 3140 3140 3140 3000 2500
Flux à nnom et VGiga qv L/min 37 59 84 117 162 163 187 212 230
à nE = 1500 tr/min qvE L/min 15 27 42 68 90 95 108 128 150
Puissance Avec Nnom, VGiga et Δp = 250 bar P kW 16 25 35 49 65 68 77 89 96
à nE= 1500 tr/min PE kW 7 11 18 28 37 39 45 53 62
Couple à VGiga et Δp = 250 bar M Rien 42 71 111 179 238 250 286 338 398
à VGiga et Δp = 100 bar M Rien 17 29 45 72 95 100 114 135 159
Rigidité de rotation arbre d'entraînement S c Nm/rad 9200 11000 22300 37500 65500 65500 65500 143000 143000
R c Nm/rad – 14800 26300 41000 69400 69400 69400 152900 152900
U c Nm/rad 6800 8000 16700 30000 49200 49200 49200 102900 102900
W c Nm/rad – – 19900 34400 54000 54000 54000 117900 117900
P c Nm/rad 10700 – – – – – – – –
Moment d'inertie du groupe tournant JTW Kgm2 0.0006 0.0009 0.0017 0.003 0.0056 0.0056 0.0056 0.012 0.012
Accélération angulaire maximale3) α rad/s2 8000 6800 5500 4000 3300 3300 3300 2700 2700
Volume du boîtier V L 0.2 0.25 0.3 0.5 0.8 0.8 0.8 1 1
Weight without through drive (approx.) Weight with through drive (approx.) m kg 8 11.5 15 18 22 22 22 36 36
– 13 18 24 28 28 28 45 45

Définir les caractéristiques de fonctionnement

Key Vg  Déplacement par révolution en [cm3] Δp  Differential pressure [bar] n   Rotational speed [rpm] ηv   Volumetric efficiency ηhm  Hydraulic-mechanical efficiency ηt   Efficacité totale (ηt= ηv*ηhm) 1) The values are applicable: – At an abs. pressure pabdos = 1 bar at the suction port S – for the optimum viscosity range from Vopt = 36 à 16 mm2/s – with hydraulic fluid on the basis of mineral oils 2)Voir le diagramme à la page 9 lors de l'augmentation de la vitesse jusqu'à nmax adm. 3)Les données sont valides pour des valeurs comprises entre la vitesse de rotation minimale requise et la vitesse maximale admissible. Cela s'applique aux stimuli externes (par exemple, moteur diesel 2 à 8 fois la fréquence de rotation, arbre de transmission deux fois la fréquence de rotation). La valeur limite n'est valable que pour une seule pompe. La capacité de charge des pièces de connexion doit être prise en compte.

Forces radiales et axiales admissibles sur l'arbre d'entraînement

Taille NG 10 18 28 45 60/63 72 85 100
Force radiale maximale à a/2 cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits Fq max N 250 350 1200 1500 1700 1500 2000 2000
Force axiale maximale cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits ±Fax max N 400 700 1000 1500 2000 1500 3000 3000

couples d'entrée et de transmission admissibles

Taille 10 18 28 45 60/63 72 85 100
Couple d'entrée maximal sur l'arbre d'entraînement2)
S ME max Rien 126 124 198 319 630 630 1157 1157
∅ in 3/4 3/4 7/8 1 1 1/4 1 1/4 1 1/2 1 1/2
R ME max Rien – 160 250 400 650 650 1215 1215
∅ in – 3/4 7/8 1 1 1/4 1 1/4 1 1/2 1 1/2
U ME max Rien 60 59 105 188 306 306 628 628
∅ in 5/8 5/8 3/4 7/8 1 1 1 1/4 1 1/4
W ME max Rien – – 140 220 396 383 650 650
∅ in – – 3/4 7/8 1 1 1 1/4 1 1/4
P ME max Rien 90 – – – – – – –
∅ mm 18 – – – – – – –
Couple maximal en traversée
S MD max Rien – 108 160 319 484 484 698 698
R MD max Rien – 120 176 365 484 484 698 –
U MD max Rien – 59 105 188 306 306 628 628
W MD max Rien – – 140 220 396 383 650 650

Répartition des couples

  cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
Couple d'entrée ME=M1+M2+M3
ME < ME max
Couple en traversée MD=M2+M3
MD < MD max
1)Efficacité non prise en compte 2) For drive shafts with no radial force
Watch A10VSO Series 52 Product Video
A10VSO Series 52 product video

Request a A10VSO Series 52 Quotation

Tell us your required configuration, quantity and application.

Démo du formulaire de contact
A10VSO Series 52 original product photograph

Code de type 52

01 02 03 04 05 06 07 08 09 10 11 12
A10V(S) ○ / 32 - v

Unité à pistons axiaux

10 28 45 60 85
01 Conception à plateau oscillant, variable, pression nominale 250 bar, pression maximale 315 bar ● - - - - A10VS
- ● ● ● ● A10V

Mode de fonctionnement

02 Pompe à circuit ouvert ○

Taille (NG)

03 Déplacement géométrique, voir le tableau des valeurs à la page 10 10 28 45 60 85

Dispositif de commande

04 Régulateur de pression hydraulique ● ● ● ● ● Dr
avec régulateur de débit hydraulique X-T ouvert ● ● ● ● ● DFR
X-T branché avec fonction de chasse d'eau ● ● ● ● ● DFR1
sans fonction de chasse d'eau ● ● ● ● ● DRSC
avec coupure de pression hydraulique télécommandé ● ● ● ● ● GDR
électrique témoin négatif U=12V ● ● ● ● ● ED71
U=24V ● ● ● ● ● ED72
électrique témoin positif U=12V ● ● ● ● ● ER71
U=24V ● ● ● ● ● ER72
Contrôle de pression différentielle contrôle électrique (contrôle négatif) ● ● ● ● ○ EF..1)

Séries

10 28 45 60 85
05 Série 5, indice 2 ● ● ● ● ● 52

Sens de rotation

06 Vu sur l'arbre de transmission dans le sens des aiguilles d'une montre R
dans le sens inverse des aiguilles d'une montre L

 Matériau d'étanchéité

07 FKM (fluoroélastomère) V

Arbre de transmission

08 Arbre cannelé

ISO 3019-1

arbre standard ● ● ● ● ● S
similaire à l'arbre " S ", mais pour un couple d'entrée plus élevé - ● ● ● ● R
diamètre réduit, aptitude limitée pour l'entraînement traversant ● ● ● ● ● U
similaire à l'arbre " U ", mais pour un couple plus élevé, seulement conditionnellement adapté pour un montage avec entraînement traversant. - ● ● ● ● W
Arbre à clavette parallèle DIN 6885, aptitude limitée pour l'entraînement traversant ● - - - - P

Bride de fixation

09 ISO 3019-2 (ISO)  à deux trous ● - - - - A
ISO 3019-1 (SAE)  à 4 trous ● ● ● ● ● C
 à 4 trous - - - ● - D

Port en eau profonde

10 28 45 60 85
10 Orifices de bride SAE, filetage de fixation métrique arrière interdit aux véhicules en transit - ● ● ● ● 11
latéralement opposé pour entraînement traversant - ● ● ● ● 12
sur le côté, décalage 90° Interdit aux véhicules en transit;

disponible pour rotation uniquement dans le sens antihoraire

- - ● - - 13
Orifice fileté métrique arrière interdit aux véhicules en transit ● - - - - 14

Drive

11 Bride ISO 3019-1

Diamètre

Moyeu pour arbre cannelé1)

Diamètre

045 071 100 140 180
sans entraînement direct ● ● ● ● ● N00
82-2 (A) 5/8 po 9T 16/32DP - ● ● ● ● K01
3/4 po 11T 16/32DP - ● ● ● ● K52
101-2 (B) 7/8 po 13T 16/32DP - ● ● ● ● K68
1 po 15T 16/32DP - - ● ● ● K04
127-4 (C) 1 1/4 po 14T 12/24DP - - - ● ● K15
1 1/2 po 17T12/24DP - - - - ● K16
127-2 (C) 1 1/4 po 14T 12/24DP - - - - ● K07
1 1/2 po 17T 12/24DP - - - - ● K24

Connecteurs pour solénoïdes

12 Sans connecteur (sans solénoïde, uniquement pour commandes hydrauliques, sans symboles) ● ● ● ● ●
CONNECTEUR DEUTSCH - moulé, 2 broches, sans diode de suppression (pour commande électrique) - ● ● ● ● P

• = Disponible ○ = Sur demande - = Non disponible

Données techniques

Taille NG 10 18 28 45 60 63 72 85 100
Cylindrée géométrique par tour Vg max cm3 10.5 18 28 45 60 63 72 85 100
Vitesse de rotation

maximum1)

à VGiga nnom tours par minute 3600 3300 3000 26004) 2700 2600 2600 2500 2300
à Vg <Vg max 2) nadm. max. tours par minute 4320 3960 3600 3120 3140 3140 3140 3000 2500
Flux à nnom et VGiga qv L/min 37 59 84 117 162 163 187 212 230
à nE = 1500 tr/min qvE L/min 15 27 42 68 90 95 108 128 150
Puissance Avec Nnom, VGiga

et Δp = 250 bar

P kW 16 25 35 49 65 68 77 89 96
à nE= 1500 tr/min PE kW 7 11 18 28 37 39 45 53 62
Couple à VGiga

et Δp = 250 bar

M Rien 42 71 111 179 238 250 286 338 398
à VGiga

et Δp = 100 bar

M Rien 17 29 45 72 95 100 114 135 159
Rigidité de rotation arbre d'entraînement S c Nm/rad 9200 11000 22300 37500 65500 65500 65500 143000 143000
R c Nm/rad - 14800 26300 41000 69400 69400 69400 152900 152900
U c Nm/rad 6800 8000 16700 30000 49200 49200 49200 102900 102900
W c Nm/rad - - 19900 34400 54000 54000 54000 117900 117900
P c Nm/rad 10700 - - - - - - - -
Moment d'inertie du groupe tournant JTW Kgm2 0.0006 0.0009 0.0017 0.003 0.0056 0.0056 0.0056 0.012 0.012
Accélération angulaire maximale3) α rad/s2 8000 6800 5500 4000 3300 3300 3300 2700 2700
Volume du boîtier V L 0.2 0.25 0.3 0.5 0.8 0.8 0.8 1 1
Poids sans entraînement traversant (approximatif)

Poids avec entraînement traversant (approximatif)

m kg 8 11.5 15 18 22 22 22 36 36
- 13 18 24 28 28 28 45 45

Définir les caractéristiques de fonctionnement

Flux qv=(Vg ∙ n ∙ ηv) / 1000 L/min
Couple M=(Vg ∙ Δp) /(20 ∙ π ∙ ηhm) Rien
Puissance P=(2π ∙ M ∙ n)/60000=(qv ∙ Δp)/(600 ∙ ηt)  kW

Clé

Vg  Déplacement par révolution en [cm3]

Δp  Pression différentielle [bar]

n   Vitesse de rotation [tr/min]

ηv   Efficacité volumétrique

ηhm  Efficacité hydraulico-mécanique

ηt   Efficacité totale (ηt= ηv*ηhm)

1) Les valeurs sont applicables :

- À une pression absolue pabdos = 1 bar à l'entrée d'aspiration S

- pour la plage de viscosité optimale à partir de Vopt = 36 à 16 mm2/s

- avec un fluide hydraulique à base d'huiles minérales

2)Voir le diagramme à la page 9 lors de l'augmentation de la vitesse jusqu'à nmax adm.

3)Les données sont valides pour des valeurs comprises entre la vitesse de rotation minimale requise et la vitesse maximale admissible. Cela s'applique aux stimuli externes (par exemple, moteur diesel 2 à 8 fois la fréquence de rotation, arbre de transmission deux fois la fréquence de rotation). La valeur limite n'est valable que pour une seule pompe. La capacité de charge des pièces de connexion doit être prise en compte.

Forces radiales et axiales admissibles sur l'arbre d'entraînement

Taille NG 10 18 28 45 60/63 72 85 100
Force radiale maximale à a/2 Fq max N 250 350 1200 1500 1700 1500 2000 2000
Force axiale maximale ±Fax max N 400 700 1000 1500 2000 1500 3000 3000

couples d'entrée et de transmission admissibles

Taille 10 18 28 45 60/63 72 85 100
Couple à VGiga et Δp = 250 bar1) Mmax Rien 42 71 111 179 250 321 338 398
Couple d'entrée maximal sur l'arbre d'entraînement2)
S ME max Rien 126 124 198 319 630 630 1157 1157
∅ in 3/4 3/4 7/8 1 1 1/4 1 1/4 1 1/2 1 1/2
R ME max Rien - 160 250 400 650 650 1215 1215
∅ in - 3/4 7/8 1 1 1/4 1 1/4 1 1/2 1 1/2
U ME max Rien 60 59 105 188 306 306 628 628
∅ in 5/8 5/8 3/4 7/8 1 1 1 1/4 1 1/4
W ME max Rien - - 140 220 396 383 650 650
∅ in - - 3/4 7/8 1 1 1 1/4 1 1/4
P ME max Rien 90 - - - - - - -
∅ mm 18 - - - - - - -
Couple maximal en traversée
S MD max Rien - 108 160 319 484 484 698 698
R MD max Rien - 120 176 365 484 484 698 -
U MD max Rien - 59 105 188 306 306 628 628
W MD max Rien - - 140 220 396 383 650 650

Répartition des couples

 

Couple à la première pompe M1
Couple à la deuxième pompe M2
Couple à la troisième pompe M3
Couple d'entrée ME=M1+M2+M3
ME < ME max
Couple en traversée MD=M2+M3
MD < MD max

1)Efficacité non prise en compte

2) For drive shafts with no radial force

Série A10VO 52