شركة ونزهو برانس للمعدات الهيدروليكية المحدودة
A2FM Fixed Displacement Bent Axis Motor
The A2FM fixed displacement motor converts hydraulic flow and pressure difference into shaft speed and torque. It is listed for open and closed circuits, provided the selected model meets the circuit pressure, drainage and installation conditions.
- Fixed displacement motor
- Bent-axis piston design
- Mobile and industrial applications
- Size and interfaces selected from the model code
PRANCE HYDRAULIC · PRODUCT SERIES
Axial piston; bent axis, fixed displacement · Open and closed circuits, subject to configuration
The A2FM fixed displacement motor converts hydraulic flow and pressure difference into shaft speed and torque. It is listed for open and closed circuits, provided the selected model meets the circuit pressure, drainage and installation conditions.
Model

Confirm the complete model and approved specification with Prance Hydraulic. Product-series references alone do not establish interchangeability.
Configuration review · Technical documentation · Product selection
تفاصيل المنتج
- Fixed displacement motor
- Bent-axis piston design
- Mobile and industrial applications
- Size and interfaces selected from the model code
CATEGORIES: محرك إزاحة ثابتة, محرك مكبس
A2FM Features & Application
Fixed displacement motor
For a fixed displacement, flow and speed remain linked by the selected displacement. Check the actual operating point and efficiency.
Bent-axis piston design
Specify the full MS order code, installation drawing and operating duty so the quotation can identify the proposed configuration.
Mobile and industrial applications
Check the required shaft torque and speed at the same operating point. Include starting duty, return pressure and external shaft loads.
Size and interfaces selected from the model code
Check pilot diameter, bolt pattern, shaft engagement or port pattern against the approved installation drawing.
A2FM Specifications
| Series / model | A2FM |
|---|---|
| Product type | A2FM Fixed Displacement Bent Axis Motor |
| تصميم | Axial piston; bent axis, fixed displacement |
| Circuit / selection | Open and closed circuits, subject to configuration |
| التحكم في السعة | Fixed |
| السائل الهيدروليكي | Mineral-oil use described; confirm other fluids and seal options individually |
A2FM Selection & Configuration
The A2FM fixed displacement motor converts hydraulic flow and pressure difference into shaft speed and torque. It is listed for open and closed circuits, provided the selected model meets the circuit pressure, drainage and installation conditions.
Choose displacement from the required torque-speed duty and available flow, then check external shaft loads and case pressure. Increasing supply pressure alone does not establish safe operation if the return or drain is restricted. Use the selected model data for continuous and peak conditions.

Your Application.
The Right Configuration.
Hydraulic pumps · Hydraulic motors · Hydraulic valves
Send the MS nameplate, operating requirements and installation drawing for a configuration review before quoting.
- Model review — send the full model code or an existing nameplate photograph.
- Interface matching — confirm shaft, mounting flange, rotation and ports.
- Operating conditions — provide flow, pressure, speed, fluid and duty cycle.
- Documentation — request the relevant product data and drawings for your review.

A2FM Buying Guide
Use this sequence to prepare the A2FM configuration for review and quotation.
- Define starting and continuous torque, speed range and duty cycle.
- Specify available flow, work-port pressure difference and return pressure.
- Confirm the displacement setting and required behavior during starting and stopping.
- Check shaft, mounting pilot, flange, port orientation and external loads.
- Review case drainage, replenishment and any displacement control.
- Specify fluid conditions and any independent braking requirement.
- Approve the complete model, operating envelope, drawing and quantity.

Selection, Documentation & Project Support

Selection Support
Learn more →Share your hydraulic circuit, operating point and installation requirements for a configuration discussion.
Flow · Pressure · Speed · Interfaces

Technical Resources
Learn more →Review product documentation, model codes and technical data before finalizing the specification.
Datasheets · Model codes · Drawings

Project Inquiries
Learn more →Send your required model, quantity, application and project requirements to discuss your inquiry.
Product inquiries · Configuration review
Configuration, Quantity & Delivery
Confirm the complete MS code, approved drawing and operating limits. Availability, quantity, documentation and delivery date are confirmed in the quotation.
Discuss Your A2FM Application
Send the full model code, operating duty, installation details and quantity.
Request a A2FM QuotationA2FM Questions Before Ordering
What type of product is the A2FM?
AA2FM Fixed Displacement Bent Axis Motor. Design: Axial piston; bent axis, fixed displacement. Open and closed circuits, subject to configuration. Confirm the complete order code for the offered version.
Can a similar motor replace the A2FM?
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
A2FM Technical Data & Documents
View A2FM catalog data and operating conditions
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
البيانات الفنية
السائل الهيدروليكي
محرك A2FM ذو الإزاحة الثابتة مناسب للاستخدام مع الزيت المعدني.نطاق اللزوجة
We recommend that a viscosity (at operating temperature)for optimum efficiency and service life purposes of Vopt= optimum viscosity 16…36mm2يجب اختيار، مع مراعاة درجة حرارة الدورة (الدائرة المغلقة) ودرجة حرارة الخزان (الدائرة المفتوحة).حدود نطاق اللزوجة
The following values apply extreme cases: Vالحد الأدنى=5مم2/s short term(t < 3 min) at max. permitted temperature tالحد الأقصى=115℃ Vالحد الأقصى=1600مم2/s short term (t<3 min) with cold start(P<3MPa, n≤1000rpm tالحد الأدنىملاحظة أن درجة حرارة سائل الهيدروليك القصوى يجب ألا تتجاوز محليًا أيضًا (مثل منطقة التحمل). درجة الحرارة في منطقة التحمل تعتمد على الضغط والسرعة وتصل إلى 12 ك أعلى من درجة حرارة تصريف الحالة المتوسطة.مخطط الاختيار
تفاصيل حول اختيار السائل الهيدروليكي
The correct choice of pressure fluid requires knowledge of the operating temperature in relation to the ambient temperature:in a closed circuit the circulation temperature,in an open circuit the tank temperature. The hydraulic fluid should be selected so that within the operating temperature range,the operating viscosity lies within the optimum range (υ opt) (see shaded section of the selection diagram).We recommend that the highest possible viscosity range should be chosen in each case. Example:At an ambient temperature of X℃ an operating temperature of 60℃ is set in the circuit . In the optimum operating viscosity range (υ opt; shaded area) this corresponds to the viscosity classes VG 46 or VG68; to be selected: CG 68 Please note : The leakage fluid temperature, which is affected by pressure and rotational speed, is always higher than the circulation temperature or tank temperature. At no point in the system may t-he temperature be higher than 115℃.الترشيح
The finer the filtration, the cleaner the fluid and the longer the service life of the axial piston unit. To ensure proper function of the axial piston unit, the hydraulic fluid must have a cleanliness level of least. 20/18/15 according to ISO 4406. At very high hydraulic fluid temperatures (90℃ to max. 115℃),a cleanliness level of at least. 19/17/14 according to ISO 4406 is required. Please contact us if these cleanliness levels cannot be achieved. نطاق ضغط التشغيل Maximum pressure on port A or B (pressure data according to DIN 24312)| Shaft end A,Z | Shaft end B, P | |
| الضغط الاسمي PN | 40 Mpa | 35 Mpa |
| الضغط الأقصى Pالحد الأقصى | 45 MPa | 40 MPa |
| summation pressure (A+B) | 70 MPa | 70 MPa |
Direction of flow
Speed rang
No limit to minimum speed nالحد الأدنى. If uniform motion is required,nالحد الأدنى must not be less than 50 rpm.Shaft seal ring
permissible pressure load The pressure service life of the shaft seal ring is affected by the speed of the motor and the case drain pressure. The permitted loading with intermittent case drain pressure depends on the rotational speed(see chart). Short-term (t<5 min) pressure spikes of up to 1 Mpa absolute are permitted. The average permanent case drain pressure must not exceed 0. 3Mpa absolute. The pressure in the case must be equal to or greater than the external pressure on the shaft seal.
Temperature range
The FKM shaft seal is admissible for a housing temperature range from -25℃ to +115℃Table of values (theoretical values, ignoring ηالحد الأدنى و ηv; values rounded)
| حجم | 10 | 12 | 16 | 23 | 28 | 32 | 45 | |||
| إزاحة | Vg | مل/د | 10.3 | 12.0 | 16.0 | 22.9 | 28.1 | 32 | 45.6 | |
| Speed max | nالحد الأقصى | الحد الأدنى-1 | 8000 | 8000 | 8000 | 6300 | 6300 | 6300 | 5600 | |
| nmax limit1) | الحد الأدنى-1 | 8800 | 8800 | 8800 | 6900 | 6900 | 6900 | 6200 | ||
| Flow max. | qvmax | لتر/دقيقة | 82 | 96 | 128 | 144 | 176 | 201 | 255 | |
| Torque constants | TK | Nm/MPa | 1.64 | 1.9 | 2.5 | 3.6 | 4.45 | 5.09 | 7.25 | |
| عزم الدوران عند | Δp=35 MPa | T | لا شيء جديد | 57 | 67 | 88 | 126 | 156 | 178 | 254 |
| Δp=40 MPa | T | لا شيء جديد | 65 | 76 | 100 | 144 | 178 | 204 | 290 | |
| سعة التعبئة | L | 0.17 | 0.17 | 0.17 | 0.20 | 0.20 | 0.20 | 0.33 | ||
| Mass moment of inertia around output shaft | J | كجم متر2 | 0.0004 | 0.0004 | 0.0004 | 0.0012 | 0.0012 | 0.0012 | 0.0024 | |
| Mass(approx.) | kg | 5.4 | 5.4 | 5.4 | 9.5 | 9.5 | 9.5 | 13.5 | ||
| حجم | 56 | 63 | 80 | 90 | 107 | 125 | 160 | 180 | |||
| إزاحة | Vg | مل/د | 56.1 | 63.0 | 80.4 | 90.0 | 106.7 | 125.0 | 160.4 | 180.0 | |
| Speed max | nالحد الأقصى | الحد الأدنى-1 | 5000 | 5000 | 4500 | 4500 | 4000 | 4000 | 3600 | 3600 | |
| nmax limit1) | الحد الأدنى-1 | 5500 | 5500 | 5000 | 5000 | 4400 | 4400 | 4000 | 4000 | ||
| Flow max. | qvmax | لتر/دقيقة | 280 | 315 | 360 | 405 | 427 | 500 | 577 | 648 | |
| Torque constants | TK | Nm/MPa | 8.9 | 10.0 | 12.7 | 17.0 | 19.9 | 25.4 | 28.6 | 31.8 | |
| عزم الدوران عند | Δp=35 MPa | T | لا شيء جديد | 312 | 350 | 445 | 501 | 595 | 697 | 889 | 1001 |
| Δp=40 MPa | T | لا شيء جديد | 356 | 400 | 508 | 572 | 680 | 796 | 1016 | 1144 | |
| سعة التعبئة | L | 0.45 | 0.45 | 0.55 | 0.55 | 0.8 | 0.80 | 1.1 | 1.1 | ||
| Mass moment of inertia around output shaft | J | كجم متر2 | 0.0042 | 0.0042 | 0.0072 | 0.0072 | 0.0116 | 0.0116 | 0.0220 | 0.0220 | |
| Mass(approx.) | kg | 18 | 18 | 23 | 23 | 32 | 32 | 45 | 45 | ||
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
| تدفق | qv=(VgcURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limitsv) | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | Vg=Displacement per revolution in mL/r Δp=Differential pressure in MPa n=Speed in rpm ηv=Volumetric efficiency ηمم=Mechanical-hydraulic efficiency ηtcURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits |
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | n=(qv∙1000∙ηv)/Vg | [rpm] | |
| عزم الدوران | T=(Vg∙ Δp∙ηمم)/20π | [نيوتن متر] | |
| طاقة | P=(2π∙T∙n)/60000=(qv∙Δp)/(600∙ηt) | [KW] |
| حجم | 10 | 12 | 16 | 23 | 28 | 32 | 45 | 56 | |||
| Radial force,max.1) at distance a (from shaft collar) | ![]() |
Fqmax | N | 2350 | 2750 | 3700 | 4300 | 5400 | 6100 | 81502) | 92002) |
| a | mm | 16 | 16 | 16 | 16 | 16 | 16 | 18 | 18 | ||
| القوة المحورية، الحد الأقصى.3) | ![]() |
+Fax max | N | 320 | 320 | 320 | 500 | 500 | 500 | 630 | 800 |
| -Fax max | N | 320 | 320 | 320 | 500 | 500 | 500 | 630 | 800 | ||
| Permissible axial force/MPa operating pressure | ±Fax per/MPa | N/MPa | 30 | 30 | 30 | 52 | 52 | 52 | 70 | 87 | |
| حجم | 63 | 80 | 90 | 107 | 125 | 160 | 180 | |||
| Radial force,max.1) at distance a (from shaft collar) | ![]() |
Fqmax | N | 10300 | 115002) | 12900 | 13600 | 15900 | 18400 | 20600 |
| a | mm | 18 | 20 | 20 | 20 | 20 | 25 | 25 | ||
| القوة المحورية، الحد الأقصى.3) | ![]() |
+Fax max | N | 800 | 1000 | 1000 | 12500 | 1250 | 1600 | 1600 |
| -Fax max | N | 800 | 1000 | 1000 | 12500 | 1250 | 1600 | 1600 | ||
| Permissible axial force/MPa operating pressure | ±Fax per/MPa | N/MPa | 87 | 106 | 106 | 129 | 129 | 167 | 167 | |
Minimum inlet pressure on service line port A(B)
In order to avid damage of the motor a minimum inlet pressure at the inlet zone must be assured. The minimum inlet pressure is related to the rotational speed of the fixed motor.
Please contact us if these conditions cannot be satisfied.Related Selection Resources
Request a A2FM Quotation
أخبرنا بالتكوين المطلوب، الكمية والتطبيق.
البيانات الفنية
السائل الهيدروليكي
محرك A2FM ذو الإزاحة الثابتة مناسب للاستخدام مع الزيت المعدني.
نطاق اللزوجة
نوصي بلزوجة (عند درجة حرارة التشغيل) لتحقيق أفضل
كفاءة وعمر خدمة ممكنين
Vopt= لزوجة مثلى 16...36مم2/s
يجب اختيار، مع مراعاة درجة حرارة الدورة (الدائرة المغلقة) ودرجة حرارة الخزان (الدائرة المفتوحة).
حدود نطاق اللزوجة
القيم التالية تنطبق على الحالات القصوى:
Vالحد الأدنى=5مم2/s
قصير الأمد (t < 3 دقائق) عند أقصى درجة حرارة مسموح بها
tالحد الأقصى=115℃
Vالحد الأقصى=1600مم2/s
قصير الأمد (t<3 دقائق) مع بدء بارد (P<3 ميجا باسكال،,
n≤1000 دورة/دقيقة tالحد الأدنى=-40℃)
ملاحظة أن درجة حرارة سائل الهيدروليك القصوى يجب ألا تتجاوز محليًا أيضًا (مثل منطقة التحمل). درجة الحرارة في منطقة التحمل تعتمد على الضغط والسرعة وتصل إلى 12 ك أعلى من درجة حرارة تصريف الحالة المتوسطة.
مخطط الاختيار

تفاصيل حول اختيار السائل الهيدروليكي
يتطلب الاختيار الصحيح للسائل الضغط معرفة درجة حرارة التشغيل بالنسبة لدرجة حرارة البيئة: في دائرة مغلقة درجة حرارة الدورة، وفي دائرة مفتوحة درجة حرارة الخزان.
يجب اختيار السائل الهيدروليكي بحيث يكون ضمن نطاق درجة حرارة التشغيل، وتكون اللزوجة التشغيلية ضمن النطاق المثالي (υ opt) (انظر القسم المظلّل من مخطط الاختيار). نوصي باختيار أعلى نطاق لزوجة ممكن في كل حالة.
مثال: عند درجة حرارة بيئية تبلغ X℃، يتم ضبط درجة حرارة التشغيل على 60℃ في الدائرة. في نطاق اللزوجة التشغيلية المثالية (υ opt؛ المنطقة المظللة) هذا يتوافق مع فئات اللزوجة VG 46 أو VG 68؛ ويجب اختيار: CG 68
يرجى ملاحظة ما يلي: تكون درجة حرارة سائل التسرب، التي تتأثر بالضغط وسرعة الدوران، أعلى دائمًا من درجة حرارة سائل الدوران أو درجة حرارة الخزان. يجب ألا تتجاوز درجة الحرارة في أي نقطة من النظام 115℃.
الترشيح
كلما زادت دقة الترشيح، كان السائل أكثر نظافة وطالت مدة الخدمة
لوحدة المكبس المحوري.
لضمان الأداء السليم لوحدة المكبس المحوري، يجب أن يتمتع السائل الهيدروليكي بمستوى نظافة لا يقل عن.
20/18/15 وفقًا للمعيار ISO 4406.
عند درجات حرارة مرتفعة جدًا للسائل الهيدروليكي (من 90℃ إلى 115℃ كحد أقصى)، يلزم مستوى نظافة لا يقل عن.
19/17/14 وفقًا للمعيار ISO 4406.
يرجى الاتصال بنا إذا تعذر تحقيق مستويات النظافة هذه.
نطاق ضغط التشغيل
Maximum pressure on port A or B
(pressure data according to DIN 24312)
| Shaft end A,Z | Shaft end B, P | |
| الضغط الاسمي PN | 40 Mpa | 35 Mpa |
| الضغط الأقصى Pالحد الأقصى | 45 MPa | 40 MPa |
| summation pressure (A+B) | 70 MPa | 70 MPa |
Please note:at the shaft end Z and P, a nominal pressure of PN=31. 5MPa (Pالحد الأقصى=35MPa) is permitted for the driven shaft end that is subjected to transverse bending (pinions, V-belts) !
Size 56 with shaft end Z:PN=35MPa, Pالحد الأقصى=40MPa
in cases of pulsating loading above 31. 5MPa, we recommend the version with splined shaft A or splined shaft Z(sizes 45)
Direction of flow
Speed rang
No limit to minimum speed nالحد الأدنى. If uniform motion is required,nالحد الأدنى must not be less than 50 rpm.
Shaft seal ring
permissible pressure load
The pressure service life of the shaft seal ring is affected by the speed of the motor and the case drain pressure. The permitted loading with intermittent case drain pressure depends on the rotational speed(see chart). Short-term (t<5 min) pressure spikes of up to 1 Mpa absolute are permitted.
The average permanent case drain pressure must not exceed 0. 3Mpa absolute.
The pressure in the case must be equal to or greater than the external pressure on the shaft seal.

Temperature range
The FKM shaft seal is admissible for a housing temperature range
from -25℃ to +115℃
Table of values (theoretical values, ignoring ηالحد الأدنى و ηv; values rounded)
| حجم | 10 | 12 | 16 | 23 | 28 | 32 | 45 | |||
| إزاحة | Vg | مل/د | 10.3 | 12.0 | 16.0 | 22.9 | 28.1 | 32 | 45.6 | |
| Speed max | nالحد الأقصى | الحد الأدنى-1 | 8000 | 8000 | 8000 | 6300 | 6300 | 6300 | 5600 | |
| nmax limit1) | الحد الأدنى-1 | 8800 | 8800 | 8800 | 6900 | 6900 | 6900 | 6200 | ||
| Flow max. | qvmax | لتر/دقيقة | 82 | 96 | 128 | 144 | 176 | 201 | 255 | |
| Torque constants | TK | Nm/MPa | 1.64 | 1.9 | 2.5 | 3.6 | 4.45 | 5.09 | 7.25 | |
| عزم الدوران عند | Δp=35 MPa | T | لا شيء جديد | 57 | 67 | 88 | 126 | 156 | 178 | 254 |
| Δp=40 MPa | T | لا شيء جديد | 65 | 76 | 100 | 144 | 178 | 204 | 290 | |
| سعة التعبئة | L | 0.17 | 0.17 | 0.17 | 0.20 | 0.20 | 0.20 | 0.33 | ||
| Mass moment of inertia around output shaft |
J | كجم متر2 | 0.0004 | 0.0004 | 0.0004 | 0.0012 | 0.0012 | 0.0012 | 0.0024 | |
| Mass(approx.) | kg | 5.4 | 5.4 | 5.4 | 9.5 | 9.5 | 9.5 | 13.5 | ||
| حجم | 56 | 63 | 80 | 90 | 107 | 125 | 160 | 180 | |||
| إزاحة | Vg | مل/د | 56.1 | 63.0 | 80.4 | 90.0 | 106.7 | 125.0 | 160.4 | 180.0 | |
| Speed max | nالحد الأقصى | الحد الأدنى-1 | 5000 | 5000 | 4500 | 4500 | 4000 | 4000 | 3600 | 3600 | |
| nmax limit1) | الحد الأدنى-1 | 5500 | 5500 | 5000 | 5000 | 4400 | 4400 | 4000 | 4000 | ||
| Flow max. | qvmax | لتر/دقيقة | 280 | 315 | 360 | 405 | 427 | 500 | 577 | 648 | |
| Torque constants | TK | Nm/MPa | 8.9 | 10.0 | 12.7 | 17.0 | 19.9 | 25.4 | 28.6 | 31.8 | |
| عزم الدوران عند | Δp=35 MPa | T | لا شيء جديد | 312 | 350 | 445 | 501 | 595 | 697 | 889 | 1001 |
| Δp=40 MPa | T | لا شيء جديد | 356 | 400 | 508 | 572 | 680 | 796 | 1016 | 1144 | |
| سعة التعبئة | L | 0.45 | 0.45 | 0.55 | 0.55 | 0.8 | 0.80 | 1.1 | 1.1 | ||
| Mass moment of inertia around output shaft |
J | كجم متر2 | 0.0042 | 0.0042 | 0.0072 | 0.0072 | 0.0116 | 0.0116 | 0.0220 | 0.0220 | |
| Mass(approx.) | kg | 18 | 18 | 23 | 23 | 32 | 32 | 45 | 45 | ||
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
| تدفق | qv=(VgcURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limitsv) | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | VgcURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits ηv=الكفاءة الحجمية ηممcURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits ηtcURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits |
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | n=(qv∙1000∙ηv)/Vg | [rpm] | |
| عزم الدوران | T=(Vg∙ Δp∙ηمم)/20π | [نيوتن متر] | |
| طاقة | P=(2π∙T∙n)/60000=(qv∙Δp)/(600∙ηt) | [KW] |
Permissible radial and axial loading on the drive shaft
The values given are maximum values and do not apply to continuous operation
| حجم | 10 | 12 | 16 | 23 | 28 | 32 | 45 | 56 | |||
| Radial force,max.1) at distance a (from shaft collar) |
![]() |
Fqmax | N | 2350 | 2750 | 3700 | 4300 | 5400 | 6100 | 81502) | 92002) |
| a | mm | 16 | 16 | 16 | 16 | 16 | 16 | 18 | 18 | ||
| القوة المحورية، الحد الأقصى.3) | ![]() |
+Fax max | N | 320 | 320 | 320 | 500 | 500 | 500 | 630 | 800 |
| -Fax max | N | 320 | 320 | 320 | 500 | 500 | 500 | 630 | 800 | ||
| Permissible axial force/MPa operating pressure |
±Fax per/MPa | N/MPa | 30 | 30 | 30 | 52 | 52 | 52 | 70 | 87 | |
| حجم | 63 | 80 | 90 | 107 | 125 | 160 | 180 | |||
| Radial force,max.1) at distance a (from shaft collar) |
![]() |
Fqmax | N | 10300 | 115002) | 12900 | 13600 | 15900 | 18400 | 20600 |
| a | mm | 18 | 20 | 20 | 20 | 20 | 25 | 25 | ||
| القوة المحورية، الحد الأقصى.3) | ![]() |
+Fax max | N | 800 | 1000 | 1000 | 12500 | 1250 | 1600 | 1600 |
| -Fax max | N | 800 | 1000 | 1000 | 12500 | 1250 | 1600 | 1600 | ||
| Permissible axial force/MPa operating pressure |
±Fax per/MPa | N/MPa | 87 | 106 | 106 | 129 | 129 | 167 | 167 | |
1) during intermittent operation
2)permissible max.radial force with shaft end Z:Fq max = 6500N
3)max. permissible axial force when stopped or when axial piston unit working in pressureless conditions
4)when stopped or when axial piston unit working in pressureless condition. Higher forces are permitted when under pressure.
Please contact us.
When considering the permissible axial force, the force-transfer direction must be taken into account:
-Fفأس الحد الأقصى = increase in service life of bearings
+Fفأس الحد الأقصى =reduction in service life of bearings(avoid if at all possible)
Minimum inlet pressure on service line port A(B)
In order to avid damage of the motor a minimum inlet pressure at the inlet zone must be assured.
The minimum inlet pressure is related to the rotational speed of the fixed motor.

Please contact us if these conditions cannot be satisfied.











