شركة ونزهو برانس للمعدات الهيدروليكية المحدودة
A2FE Fixed Displacement Bent Axis Motor
The A2FE is a fixed displacement bent-axis hydraulic motor. Its installation arrangement must be reviewed from the A2FE drawing; a related A2FM description does not establish that its housing and mounting interface are interchangeable.
- Fixed displacement axial piston motor
- Bent-axis construction
- Installation interface must match the A2FE drawing
- Output depends on flow and pressure difference
PRANCE HYDRAULIC · PRODUCT SERIES
Axial piston; bent axis, fixed displacement · Open and closed circuits, subject to configuration
The A2FE is a fixed displacement bent-axis hydraulic motor. Its installation arrangement must be reviewed from the A2FE drawing; a related A2FM description does not establish that its housing and mounting interface are interchangeable.
Model

Confirm the complete model and approved specification with Prance Hydraulic. Product-series references alone do not establish interchangeability.
Configuration review · Technical documentation · Product selection
تفاصيل المنتج
- Fixed displacement axial piston motor
- Bent-axis construction
- Installation interface must match the A2FE drawing
- Output depends on flow and pressure difference
CATEGORIES: محرك إزاحة ثابتة, محرك مكبس
A2FE Features & Application
Fixed displacement axial piston motor
For a fixed displacement, flow and speed remain linked by the selected displacement. Check the actual operating point and efficiency.
Bent-axis construction
Specify the full MS order code, installation drawing and operating duty so the quotation can identify the proposed configuration.
Installation interface must match the A2FE drawing
Check pilot diameter, bolt pattern, shaft engagement or port pattern against the approved installation drawing.
Output depends on flow and pressure difference
Keep continuous, intermittent and peak conditions separate. Use the row for the selected size and configuration.
A2FE Specifications
| Series / model | A2FE |
|---|---|
| Product type | A2FE Fixed Displacement Bent Axis Motor |
| تصميم | Axial piston; bent axis, fixed displacement |
| Circuit / selection | Open and closed circuits, subject to configuration |
| التحكم في السعة | Fixed |
| Technical document | A2FE series document; check the complete configuration |
A2FE Selection & Configuration
The A2FE is a fixed displacement bent-axis hydraulic motor. Its installation arrangement must be reviewed from the A2FE drawing; a related A2FM description does not establish that its housing and mounting interface are interchangeable.
Start a replacement enquiry with the A2FE nameplate and a drawing of the gearbox or mounting location. Check shaft engagement, housing clearance, port access and the drain route. Apply pressure and speed limits to the exact size and series rather than the family as a whole.

Your Application.
The Right Configuration.
Hydraulic pumps · Hydraulic motors · Hydraulic valves
Send the MS nameplate, operating requirements and installation drawing for a configuration review before quoting.
- Model review — send the full model code or an existing nameplate photograph.
- Interface matching — confirm shaft, mounting flange, rotation and ports.
- Operating conditions — provide flow, pressure, speed, fluid and duty cycle.
- Documentation — request the relevant product data and drawings for your review.

A2FE Buying Guide
Use this sequence to prepare the A2FE configuration for review and quotation.
- Define starting and continuous torque, speed range and duty cycle.
- Specify available flow, work-port pressure difference and return pressure.
- Confirm the displacement setting and required behavior during starting and stopping.
- Check shaft, mounting pilot, flange, port orientation and external loads.
- Review case drainage, replenishment and any displacement control.
- Specify fluid conditions and any independent braking requirement.
- Approve the complete model, operating envelope, drawing and quantity.

Selection, Documentation & Project Support

Selection Support
Learn more →Share your hydraulic circuit, operating point and installation requirements for a configuration discussion.
Flow · Pressure · Speed · Interfaces

Technical Resources
Learn more →Review product documentation, model codes and technical data before finalizing the specification.
Datasheets · Model codes · Drawings

Project Inquiries
Learn more →Send your required model, quantity, application and project requirements to discuss your inquiry.
Product inquiries · Configuration review
Configuration, Quantity & Delivery
Confirm the complete MS code, approved drawing and operating limits. Availability, quantity, documentation and delivery date are confirmed in the quotation.
Discuss Your A2FE Application
Send the full model code, operating duty, installation details and quantity.
Request a A2FE QuotationA2FE Questions Before Ordering
What type of product is the A2FE?
AA2FM Fixed Displacement Bent Axis Motor. Design: Axial piston; bent axis, fixed displacement. Open and closed circuits, subject to configuration. Confirm the complete order code for the offered version.
Can a similar motor replace the A2FE?
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
A2FE Technical Data & Documents
View A2FE catalog data and operating conditions
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
البيانات الفنية
Pressure at port A or B Nominal pressure——–Pn = 35MPa Peak pressure———Pالحد الأقصى = 40MPa The sum of the pressure at port A or B must not exceed 710MPa (Individual pressure on either.side max, 40MPa) Maximun pernissible case pressure Pca———–0.2MPa tالحد الأدنى———— -25℃ tالحد الأقصى———— +80℃Viscosity Range
Vالحد الأدنى (for short periods)——— 10mm2/s Vالحد الأقصى (for short periods)——— 1000mm2/s Optimun Operating viscosity Vopt——— 16-36mm2/s Fluid Recommendations| Operatingtemperature range | DIN51519 or ISO(VG) Recommendations viscosity class to DIN51519ISO(VG) |
| 30-40℃ | VG22 22mm2/s at 40°C |
| 40-50℃ | VG35 32mm2/s at 40°C |
| 50-60℃ | VG46 46mm2/s at 40°C |
| 60-70℃ | VG68 68mm2/s at 40°C |
| 70-80℃ | VG100 100mm2/s at 40°C |
Filtration of Fluid
Recommended filtration:10um,Coarser filtration of 25-40um,is possible,but with filtration of10um.longer service life life is obtained (reduce wearing).Speed Range
No limitation on minimum Speed nالحد الأدنى,if high uniformity of rotation is required, nالحد الأدنى should not be lower than 50 rpm.See table for maximum Speed nالحد الأقصى.Mounting Position
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | ||
| تدفق | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limitsgcURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limitsv) | (لتر/دقيقة) |
| عزم الدوران | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limitsg∙Δp∙ηmb) | (Nm) |
| طاقة | P=Mn/9549=(Q∙Δp∙ηt)/60 | (KW) |
| سرعة | n=(1000∙Q∙ηv)/Vg | (د/دقيقة) |
| Vg:geom.displacement(ml/r) | ||
| Δp:Pressure differential(MPa) | ||
| n:Speed | ||
| ηv:volumetric efficiency | ||
| nmp:mech.hydr.efficiency | ||
| ηt:Overall efficiency | ||
| [ηtηy∙ηمم] | ||
| Technical Data (theoretical Values, without considering ηv∙ ηمم ∙Values rounded off) | ||
| حجم | 55 | 80 | 107 | 125 | 160 | ||
| Displaement | Vg | مل/د | 54.8 | 80 | 107 | 126.3 | 160 |
| Max.Speed | nالحد الأقصى | r/min | 3750 | 3350 | 3000 | 3000 | 2650 |
| الحد الأقصى للتدفق | Qالحد الأقصى | لتر/دقيقة | 206 | 268 | 321 | 379 | 424 |
| Torque constants | MK | Nm/MPa | 8.71 | 12.74 | 16.97 | 20.1 | 25.40 |
| Max.Torque Δp=35MPa | M | لا شيء جديد | 305 | 446 | 594 | 703.5 | 889 |
| Max. Power Δp=35MPa | P | KW | 120 | 156 | 187 | 221 | 247 |
| Moment of inertia about drive shaft | J | كجم.م2 | 0.0052 | 0.0109 | 0.0167 | 0.0322 | 0.0532 |
| Weight (approx) | كيلوغرام |
Watch A2FE Product Video
Related Selection Resources
Request a A2FE Quotation
أخبرنا بالتكوين المطلوب، الكمية والتطبيق.
البيانات الفنية
Pressure at port A or B
Nominal pressure--------Pn = 35MPa
Peak pressure---------Pالحد الأقصى = 40MPa
The sum of the pressure at port A or B must not exceed 710MPa
(Individual pressure on either.side max, 40MPa)
Maximun pernissible case pressure
Pca-----------0.2MPa
tالحد الأدنى------------ -25℃
tالحد الأقصى------------ +80℃
Viscosity Range
Vالحد الأدنى (for short periods)--------- 10mm2/s
Vالحد الأقصى (for short periods)--------- 1000mm2/s
Optimun Operating
viscosity
Vopt--------- 16-36mm2/s
Fluid Recommendations
| Operatingtemperature range | DIN51519 or ISO(VG) Recommendations viscosity class to DIN51519ISO(VG) |
| 30-40℃ | VG22 22mm2/s at 40°C |
| 40-50℃ | VG35 32mm2/s at 40°C |
| 50-60℃ | VG46 46mm2/s at 40°C |
| 60-70℃ | VG68 68mm2/s at 40°C |
| 70-80℃ | VG100 100mm2/s at 40°C |
Filtration of Fluid
Recommended filtration:10um,Coarser filtration of 25-40um,is possible,but with filtration of10um.longer service life life is obtained (reduce wearing).
Speed Range
No limitation on minimum Speed nالحد الأدنى,if high uniformity of rotation is required, nالحد الأدنى should not be lower than 50 rpm.See table for maximum Speed nالحد الأقصى.
Mounting Position
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | ||
| تدفق | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limitsgcURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limitsv) | (لتر/دقيقة) |
| عزم الدوران | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limitsg∙Δp∙ηmb) | (Nm) |
| طاقة | P=Mn/9549=(Q∙Δp∙ηt)/60 | (KW) |
| سرعة | n=(1000∙Q∙ηv)/Vg | (د/دقيقة) |
| Vg:geom.displacement(ml/r) | ||
| Δp:Pressure differential(MPa) | ||
| n:Speed | ||
| ηv:volumetric efficiency | ||
| nmp:mech.hydr.efficiency | ||
| ηt:Overall efficiency | ||
| [ηtηy∙ηمم] | ||
| Technical Data (theoretical Values, without considering ηv∙ ηمم ∙Values rounded off) |
||
| حجم | 55 | 80 | 107 | 125 | 160 | ||
| Displaement | Vg | مل/د | 54.8 | 80 | 107 | 126.3 | 160 |
| Max.Speed | nالحد الأقصى | r/min | 3750 | 3350 | 3000 | 3000 | 2650 |
| الحد الأقصى للتدفق | Qالحد الأقصى | لتر/دقيقة | 206 | 268 | 321 | 379 | 424 |
| Torque constants | MK | Nm/MPa | 8.71 | 12.74 | 16.97 | 20.1 | 25.40 |
| Max.Torque Δp=35MPa |
M | لا شيء جديد | 305 | 446 | 594 | 703.5 | 889 |
| Max. Power Δp=35MPa |
P | KW | 120 | 156 | 187 | 221 | 247 |
| Moment of inertia about drive shaft |
J | كجم.م2 | 0.0052 | 0.0109 | 0.0167 | 0.0322 | 0.0532 |
| Weight (approx) | كيلوغرام |







