A2FE Fixed Displacement Bent Axis Motor

The A2FE is a fixed displacement bent-axis hydraulic motor. Its installation arrangement must be reviewed from the A2FE drawing; a related A2FM description does not establish that its housing and mounting interface are interchangeable.

  • Fixed displacement axial piston motor
  • Bent-axis construction
  • Installation interface must match the A2FE drawing
  • Output depends on flow and pressure difference

PRANCE HYDRAULIC · PRODUCT SERIES

A2FE Fixed Displacement Bent Axis Motor

Axial piston; bent axis, fixed displacement · Open and closed circuits, subject to configuration

The A2FE is a fixed displacement bent-axis hydraulic motor. Its installation arrangement must be reviewed from the A2FE drawing; a related A2FM description does not establish that its housing and mounting interface are interchangeable.

Model

✓cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
A2FEAxial piston; bent axis, fixed displacement
Request a QuotationVer Dados Técnicos e Folha de Dados

Confirm the complete model and approved specification with Prance Hydraulic. Product-series references alone do not establish interchangeability.

Configuration review · Technical documentation · Product selection

Detalhes do Produto

  • Fixed displacement axial piston motor
  • Bent-axis construction
  • Installation interface must match the A2FE drawing
  • Output depends on flow and pressure difference

CATEGORIES: Motor de deslocamento fixo, Motor de pistões

A2FE Features & Application

Fixed displacement axial piston motor

For a fixed displacement, flow and speed remain linked by the selected displacement. Check the actual operating point and efficiency.

Bent-axis construction

Specify the full MS order code, installation drawing and operating duty so the quotation can identify the proposed configuration.

Installation interface must match the A2FE drawing

Check pilot diameter, bolt pattern, shaft engagement or port pattern against the approved installation drawing.

Output depends on flow and pressure difference

Keep continuous, intermittent and peak conditions separate. Use the row for the selected size and configuration.

A2FE Specifications

Series / modelA2FE
Product typeA2FE Fixed Displacement Bent Axis Motor
DesignAxial piston; bent axis, fixed displacement
Circuit / selectionOpen and closed circuits, subject to configuration
Controlo de deslocamentoFixed
Technical documentA2FE series document; check the complete configuration

A2FE Selection & Configuration

The A2FE is a fixed displacement bent-axis hydraulic motor. Its installation arrangement must be reviewed from the A2FE drawing; a related A2FM description does not establish that its housing and mounting interface are interchangeable.

Start a replacement enquiry with the A2FE nameplate and a drawing of the gearbox or mounting location. Check shaft engagement, housing clearance, port access and the drain route. Apply pressure and speed limits to the exact size and series rather than the family as a whole.

A2FE original product view

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.

Hydraulic pumps · Hydraulic motors · Hydraulic valves

Send the MS nameplate, operating requirements and installation drawing for a configuration review before quoting.

  • Model review — send the full model code or an existing nameplate photograph.
  • Interface matching — confirm shaft, mounting flange, rotation and ports.
  • Operating conditions — provide flow, pressure, speed, fluid and duty cycle.
  • Documentation — request the relevant product data and drawings for your review.
Prance workshop with a row of production equipment

A2FE Buying Guide

Use this sequence to prepare the A2FE configuration for review and quotation.

  1. Define starting and continuous torque, speed range and duty cycle.
  2. Specify available flow, work-port pressure difference and return pressure.
  3. Confirm the displacement setting and required behavior during starting and stopping.
  4. Check shaft, mounting pilot, flange, port orientation and external loads.
  5. Review case drainage, replenishment and any displacement control.
  6. Specify fluid conditions and any independent braking requirement.
  7. Approve the complete model, operating envelope, drawing and quantity.
A2FE original product photograph for installation review

Selection, Documentation & Project Support

Prance technical team image from its company website

Selection Support

Learn more →

Share your hydraulic circuit, operating point and installation requirements for a configuration discussion.


Flow · Pressure · Speed · Interfaces
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

Technical Resources

Learn more →

Review product documentation, model codes and technical data before finalizing the specification.


Datasheets · Model codes · Drawings
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

Project Inquiries

Learn more →

Send your required model, quantity, application and project requirements to discuss your inquiry.


Product inquiries · Configuration review

Configuration, Quantity & Delivery

Confirm the complete MS code, approved drawing and operating limits. Availability, quantity, documentation and delivery date are confirmed in the quotation.

Discuss Your A2FE Application

Send the full model code, operating duty, installation details and quantity.

Request a A2FE Quotation

A2FE Questions Before Ordering

What type of product is the A2FE?

AA2FM Fixed Displacement Bent Axis Motor. Design: Axial piston; bent axis, fixed displacement. Open and closed circuits, subject to configuration. Confirm the complete order code for the offered version.

Can a similar motor replace the A2FE?

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.

A2FE Technical Data & Documents

View A2FE catalog data and operating conditions

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.

Dados Técnicos

Pressure at port A or B Nominal pressure——–Pn = 35MPa Peak pressure———Pmáx = 40MPa The sum of the pressure at port A or B must not exceed 710MPa (Individual pressure on either.side max, 40MPa) Maximun pernissible case pressure Pcá———–0.2MPa tmin———— -25℃ tmáx———— +80℃

Gama de viscosidade

Vmin (for short periods)——— 10mm2/s Vmáx (for short periods)——— 1000mm2/s Optimun Operating viscosity Vopt——— 16-36mm2/s Fluid Recommendations
Gama de temperaturas de funcionamento Recomendações da classe de viscosidade DIN 51519 ou ISO (VG) para DIN 51519 / ISO (VG)
30-40℃ VG22 22mm2/s a 40°C
40-50℃ VG35 32mm2/s a 40°C
50-60℃ VG46 46mm2/s a 40°C
60-70℃ VG68 68mm2/s a 40°C
70-80ºC VG100 100mm2/s a 40°C

Filtração de FlUID

Filtração recomendada: 10 µm. É possível utilizar uma filtração mais grossa, de 25 a 40 µm, mas com a filtração de 10 µm obtém-se uma vida útil mais longa (reduzindo o desgaste).

Gama de velocidades

Sem limitação na velocidade mínima nmin, se for necessária uma elevada uniformidade de rotação, nmin não deve ser inferior a 50 rpm. Ver tabela para a velocidade máxima nmáx.

Posição de montagem

Opcional. A caixa deve estar sempre cheia de óleo.

Cálculo do tamanho

Motor
Fluxo Q=(Vg∙n)/(1000∙ηv) (l/min)
Binário M=(1.59Vg∙Δp∙ηMB) (Nm)
Energia P=Mn/9549=(Q∙Δp∙ηt)/60 (KW)
Velocidade n=(1000∙Q∙ηv)/Vg (rpm)
Vg:geom.deslocamento(ml/r)
Δp: Diferencial de pressão (MPa)
Velocidade
ηveficácia volumétrica
nPM:eficiência.mec.hidr
ηtEficiência global
[ηtηy∙ηmh]
Dados Técnicos (valores teóricos, sem considerar $\eta$)v∙ ηmh ∙Valores arredondados
Tamanho 55 80 107 125 160
Deslocamento Vg ml/r 54.8 80 107 126.3 160
Velocidade máx. nmáx r.p.m. 3750 3350 3000 3000 2650
Caudal máx. Qmáx L/min 206 268 321 379 424
Constantes de binário MK Nm/MPa 8.71 12.74 16.97 20.1 25.40
Max.Torque Δp=35MPa M Nm 305 446 594 703.5 889
Max. Power Δp=35MPa P kW 120 156 187 221 247
Moment of inertia about drive shaft J quilograma2 0.0052 0.0109 0.0167 0.0322 0.0532
Peso (aprox.) kg
Watch A2FE Product Video
A2FE product video

Request a A2FE Quotation

Tell us your required configuration, quantity and application.

Demonstração de Formulário de Contacto
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

Dados Técnicos

Pressão na porta A ou B

Pressão nominal--------Pn = 35MPa

Pressão de pico---------Pmáx = 40MPa

A soma da pressão na porta A ou B não deve exceder 710 MPa

(Pressão individual em cada lado máx. 40MPa)

Pressão máxima admissível do invólucro

Pcá-----------0,2 MPa

tmin------------ -25℃

tmáx------------ +80ºC

Gama de viscosidade

Vmin (por curtos períodos)--------- 10mm2/s

Vmáx (por curtos períodos)--------- 1000mm2/s

Sistema Operativo Ótimo

viscosidade

Vopt--------- 16-36mm2/s

Recomendações de Fluidos

Gama de temperaturas de funcionamento Recomendações da classe de viscosidade DIN 51519 ou ISO (VG) para DIN 51519 / ISO (VG)
30-40℃ VG22 22mm2/s a 40°C
40-50℃ VG35 32mm2/s a 40°C
50-60℃ VG46 46mm2/s a 40°C
60-70℃ VG68 68mm2/s a 40°C
70-80ºC VG100 100mm2/s a 40°C

Filtração de FlUID

Filtração recomendada: 10 µm. É possível utilizar uma filtração mais grossa, de 25 a 40 µm, mas com a filtração de 10 µm obtém-se uma vida útil mais longa (reduzindo o desgaste).

Gama de velocidades

Sem limitação na velocidade mínima nmin, se for necessária uma elevada uniformidade de rotação, nmin não deve ser inferior a 50 rpm. Ver tabela para a velocidade máxima nmáx.

Posição de montagem

Opcional. A caixa deve estar sempre cheia de óleo.

Cálculo do tamanho

Motor
Fluxo Q=(Vg∙n)/(1000∙ηv) (l/min)
Binário M=(1.59Vg∙Δp∙ηMB) (Nm)
Energia P=Mn/9549=(Q∙Δp∙ηt)/60 (KW)
Velocidade n=(1000∙Q∙ηv)/Vg (rpm)
Vg:geom.deslocamento(ml/r)
Δp: Diferencial de pressão (MPa)
Velocidade
ηveficácia volumétrica
nPM:eficiência.mec.hidr
ηtEficiência global
[ηtηy∙ηmh]
Dados Técnicos (valores teóricos, sem considerar $\eta$)v∙
ηmh ∙Valores arredondados
Tamanho 55 80 107 125 160
Deslocamento Vg ml/r 54.8 80 107 126.3 160
Velocidade máx. nmáx r.p.m. 3750 3350 3000 3000 2650
Caudal máx. Qmáx L/min 206 268 321 379 424
Constantes de binário MK Nm/MPa 8.71 12.74 16.97 20.1 25.40
Binário máx.
Δp=35MPa
M Nm 305 446 594 703.5 889
Potência Máx.
Δp=35MPa
P kW 120 156 187 221 247
Momento de inércia
sobre o veio de transmissão
J quilograma2 0.0052 0.0109 0.0167 0.0322 0.0532
Peso (aprox.) kg

A2FE