MCR Radial Piston Hydraulic Motor

The MCR radial piston motor is offered with switchable displacement and several mounting or brake arrangements. The technical data specifically describes MCR10 configurations; those figures must not be applied to every MCR frame.

  • Radial piston construction
  • Switchable displacement described in the table
  • Flange or face mounting
  • Brake options require separate confirmation

PRANCE HYDRAULIC · PRODUCT SERIES

MCR Radial Piston Hydraulic Motor

Radial piston; switchable displacement variants · Confirm the selected motor and brake circuit

The MCR radial piston motor is offered with switchable displacement and several mounting or brake arrangements. The technical data specifically describes MCR10 configurations; those figures must not be applied to every MCR frame.

Model

✓MCR original product photograph
MCRRadial piston; switchable displacement variants
Request a Quotationعرض البيانات الفنية وورقة البيانات

Confirm the complete model and approved specification with Prance Hydraulic. Product-series references alone do not establish interchangeability.

Configuration review · Technical documentation · Product selection

تفاصيل المنتج

  • Radial piston construction
  • Switchable displacement described in the table
  • Flange or face mounting
  • Brake options require separate confirmation

CATEGORIES: محرك مكبس, محرك مكابس شعاعية

MCR Features & Application

Radial piston construction

Specify the full MS order code, installation drawing and operating duty so the quotation can identify the proposed configuration.

Switchable displacement described in the table

Specify the displacement range or switching arrangement and verify performance at each required setting.

Flange or face mounting

Check pilot diameter, bolt pattern, shaft engagement or port pattern against the approved installation drawing.

Brake options require separate confirmation

Specify the full MS order code, installation drawing and operating duty so the quotation can identify the proposed configuration.

MCR Specifications

Series / modelMCR
Product typeMCR Radial Piston Hydraulic Motor
تصميمRadial piston; switchable displacement variants
Circuit / selectionConfirm the selected motor and brake circuit
Technical table scopeMCR10 configurations
Listed displacements780, 940, 1120, 1250 and 1340 cm³/rev
Displacement switchingConfirm the ordered configuration and switching conditions

MCR Selection & Configuration

The MCR radial piston motor is offered with switchable displacement and several mounting or brake arrangements. The technical data specifically describes MCR10 configurations; those figures must not be applied to every MCR frame.

Specify full- and reduced-displacement duty separately and include required starting torque. If a brake is needed, distinguish a holding brake from a service brake and identify release pressure and control responsibility. A motor photograph cannot establish the brake option supplied.

MCR original product view

Your Application.
The Right Configuration.

Hydraulic pumps · Hydraulic motors · Hydraulic valves

Send the MS nameplate, operating requirements and installation drawing for a configuration review before quoting.

  • Model review — send the full model code or an existing nameplate photograph.
  • Interface matching — confirm shaft, mounting flange, rotation and ports.
  • Operating conditions — provide flow, pressure, speed, fluid and duty cycle.
  • Documentation — request the relevant product data and drawings for your review.
Prance workshop with a row of production equipment

MCR Buying Guide

Use this sequence to prepare the MS configuration for review and quotation.

  1. Define starting and continuous torque, speed range and duty cycle.
  2. Specify available flow, work-port pressure difference and return pressure.
  3. Confirm the displacement setting and required behavior during starting and stopping.
  4. Check shaft, mounting pilot, flange, port orientation and external loads.
  5. Review case drainage, replenishment and any displacement control.
  6. Specify fluid conditions and any independent braking requirement.
  7. Approve the complete model, operating envelope, drawing and quantity.
MCR original product photograph for installation review

Selection, Documentation & Project Support

Prance technical team image from its company website

Selection Support

Learn more →

Share your hydraulic circuit, operating point and installation requirements for a configuration discussion.


Flow · Pressure · Speed · Interfaces
Prance quality standards image from its company website

Technical Resources

Learn more →

Review product documentation, model codes and technical data before finalizing the specification.


Datasheets · Model codes · Drawings
Prance sales team image from its company website

Project Inquiries

Learn more →

Send your required model, quantity, application and project requirements to discuss your inquiry.


Product inquiries · Configuration review

Configuration, Quantity & Delivery

Confirm the complete MS code, approved drawing and operating limits. Availability, quantity, documentation and delivery date are confirmed in the quotation.

Discuss Your MCR Application

Send the full model code, operating duty, installation details and quantity.

Request a MCR Quotation

MCR Questions Before Ordering

What type of product is the MCR?

MCR Radial Piston Hydraulic Motor. Design: Radial piston; switchable displacement variants. Confirm the selected motor and brake circuit. Confirm the complete order code for the offered version.

Can a similar motor replace the MCR?

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.

MCR Technical Data & Documents

View MCR catalog data and operating conditions

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.

البيانات الفنية

(للتطبيقات خارج هذه المعايير يرجى استشارتنا)

عام

نوع محرك مكبس شعاعي
الوصف محرك مكبس شعاعي متعدد الأقراص، قابل لتغيير السعة
وصف النموذج MCR 10…
نوع التركيب تركيب على حافة؛ تركيب على وجه
الاتصالات مخيط أو بلف
وضعية التركيب اختياري
تحميل العمود انظر الصفحة 6
الدوران clockwise/anti-clockwise – reversible
حجم الإطار 10
حجم 780 940 1120 1250 1340
إزاحة V سم3 780 940 1120 1250 1340
التدفق ن= 100 دورة في الدقيقة / 100 بار qV لتر/دقيقة 79 95 113,5 126,5 136,5
عزم الدوران الخارجي 1;7) 1240 1494 1783 1990 2130
-specific torque (at Δp= 100 bar) T لا شيء جديد
– peak torque T لا شيء جديد 5134 6187 6659 7432 8027
سرعة الخرج 1;7) 5 إلى 10 للتشغيل السلس، حسب التطبيق
– min. speed n دورة في الدقيقة
- الحد الأقصى للسرعة n دورة في الدقيقة 170 150 150 140 120
– freewheeling speed n دورة في الدقيقة 400
الطاقة الناتجة 1;7) 44 44 50 50 50
– continuous power P كيلوواط
الوزن - المحرك m kg 69
– motor with holding brake m kg 81
– motor with travel brake m kg 92

هيدروليكي

الضغط الاسمي p بار 250
الفرق في الضغط، مستمر. 2;6;7;8) Δp بار 250
– for mineral oil (HL, HLP)
الفرق في الضغط، الذروة 3; 6;7;8) Δp بار 450 400
- للزيت المعدني (HL، HLP)
ضغط المدخل6)  Port “A” or “B” p بار 470 420
الضغط المجمع 4; 6) Port “A” + “B” p بار 470 420
ضغط صرف الحالة، الحد الأقصى. pmax بار 10
ضغط التبديل (تبديل الإزاحة) بار 10 إلى 30
السائل الهيدروليكي 5) زيت معدني (HL، HLP) وفقًا لـ DIN 51 524
نطاق درجة حرارة السائل الهيدروليكي Θ ℃ -20 إلى 80
نطاق اللزوجة ν mm2/s 10 إلى 2000
نظافة السائل: الحد الأقصى المسموح به لدرجة تلوث السائل وفقًا لـ NAS 1638 الفئة 9. لذلك نوصي باستخدام فلتر بمعدل احتجاز أدنى β10 ≥75.

فرامل

فرامل تثبيت (فرامل قرصية)
عزم التثبيت T لا شيء جديد 7000
ضغط الإطلاق p بار الحد الأدنى 15؛ الحد الأقصى 30
فرامل السفر (فرامل أسطوانية) انظر الجدول الصفحة 10
1)The values given apply after 100 hours run-in time 2) Continuous operation 3) Peak values may occur for a maximum duration of one second only within an operating minute 4) We recommend Pالحد الأدنى cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits تحذيرcURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limitsp = 250 بار

البيانات الفنية (قيم متوسطة، مُقاسة عند ν = 46 مم2/ثانية و θ = 45 درجة مئوية)

ملاحظات حول البيانات الفنية
T = العزم بـ نيوتن.متر qV = التدفق الداخل لتر/دقيقة qVL = تدفق تصريف الغلاف لتر/دقيقة
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limitsV-لا تنطبق قيم عزم الدوران عند نصف الإزاحة على كلا اتجاهي الدوران بل فقط على الاتجاه المفضل للدوران المميز (انظر الصفحات 7-9)
حجم 780 1250
السرعة n بالدورة في الدقيقة 0 25 50 100 150 0 25 50 100 150
الفرق في الضغط Δp بالبار 100 T لا شيء جديد 806 994 1049 1029 911 1094 1818 1726 1517 1309
qV لتر/دقيقة 0,3 19,8 39,47 79,00 118,2 1,00 32,09 63,73 126,69 189,30
qVL لتر/دقيقة 0,15 0,15 0,24 0,50 0,60 0,50 0,56 0,63 0,76 0,90
200 T لا شيء جديد 1736 2232 2282 2232 2158 2586 3669 3684 3497
qV لتر/دقيقة 0,60 20,10 39,80 79,50 118,8 2,86 33,03 64,63 127,82
qVL لتر/دقيقة 0,30 0,30 0,40 0,75 0,9 1,43 1,44 1,45 1,46
300 T لا شيء جديد 2604 3348 3422 3348 4178 5550 5574
qV لتر/دقيقة 0,80 20,30 40,00 80,00 4,08 34,08 66,16
qVL لتر/دقيقة 0,40 0,40 0,50 1,00 2,04 2,10 2,16
400 T لا شيء جديد 3472 4464 4563 5730 7432 7416
qV لتر/دقيقة 1,40 20,90 40,80 5,68 35,11 67,35
qVL لتر/دقيقة 0,70 0,70 0,90 2,84 2,92 3,00
450 T لا شيء جديد 3906 5022 5134
qV لتر/دقيقة 1,6 21,10 41,00
qVL لتر/دقيقة 0,80 0,8 1,00
حجم 940 1340
السرعة n بالدورة في الدقيقة 0 25 50 100 150 0 25 50 100
الفرق في الضغط Δp بالبار 100 T لا شيء جديد 971 1198 1264 1240 1098 1182 1964 1865 1639
qV لتر/دقيقة 1,00 23,80 47,47 95,00 142,20 1,00 34,61 68,78 136,76
qVL لتر/دقيقة 0,15 0,15 0,24 0,50 0,60 0,50 0,56 0,63 0,76
200 T لا شيء جديد 2091 2690 2750 2689 2793 3962 3979 3777
qV لتر/دقيقة 0,60 24,10 47,80 95,50 2,86 35,56 69,68 137,93
qVL لتر/دقيقة 0,30 0,30 0,40 0,75 1,43 1,44 1,45 1,46
300 T لا شيء جديد 3137 4035 4124 4512 5994 6020
qV لتر/دقيقة 0,80 24,30 48,00 4,08 36,64 71,24
qVL لتر/دقيقة 0,40 0,40 0,50 2,04 2,10 2,16
400 T لا شيء جديد 4183 5380 5500 6188 8027 8010
qV لتر/دقيقة 1,40 24,90 48,80 5,68 37,67 72,50
qVL لتر/دقيقة 0,70 0,70 0,90 2,84 2,92 3,00
450 T لا شيء جديد 4706 6052 6187
qV لتر/دقيقة 1,60 25,10 49,00
qVL لتر/دقيقة 0,80 0,80 1,00
حجم 1120
السرعة n بالدورة في الدقيقة 0 25 50 100 150
الفرق في الضغط Δp بالبار 100 T لا شيء جديد 980 1629 1547 1360 1173
qV لتر/دقيقة 1,00 28,82 57,19 113,62 169,80
qVL لتر/دقيقة 0,50 0,56 0,63 0,76 0,90
200 T لا شيء جديد 2317 3287 3301 3134
qV لتر/دقيقة 2,86 29,76 58,07 114,71
qVL لتر/دقيقة 1,43 1,44 1,45 146
300 T لا شيء جديد 3743 4973 4994
qV لتر/دقيقة 4,08 30,76 59,49
qVL لتر/دقيقة 2,04 2,10 2,16
400 T لا شيء جديد 5134 6660 6645
qV لتر/دقيقة 5,68 31,76 60,87
qVL لتر/دقيقة 2,84 2,92 3,00

Request a MCR Quotation

أخبرنا بالتكوين المطلوب، الكمية والتطبيق.

نموذج الاتصال التجريبي
MCR original product photograph

البيانات الفنية

(للتطبيقات خارج هذه المعايير يرجى استشارتنا)

عام

نوع محرك مكبس شعاعي
الوصف محرك مكبس شعاعي متعدد الأقراص، قابل لتغيير السعة
وصف النموذج MCR 10...
نوع التركيب تركيب على حافة؛ تركيب على وجه
الاتصالات مخيط أو بلف
وضعية التركيب اختياري
تحميل العمود انظر الصفحة 6
الدوران اتجاه عقارب الساعة / عكس عقارب الساعة - قابل للعكس
حجم الإطار 10
حجم 780 940 1120 1250 1340
إزاحة V سم3 780 940 1120 1250 1340
التدفق ن= 100 دورة في الدقيقة / 100 بار qV لتر/دقيقة 79 95 113,5 126,5 136,5
عزم الدوران الخارجي 1;7) 1240 1494 1783 1990 2130
- عزم الدوران الخاص
(عند Δp= 100 بار)
T لا شيء جديد
- عزم الدوران الأقصى T لا شيء جديد 5134 6187 6659 7432 8027
سرعة الخرج 1;7) 5 إلى 10 للتشغيل السلس، حسب التطبيق
- الحد الأدنى للسرعة n دورة في الدقيقة
- الحد الأقصى للسرعة n دورة في الدقيقة 170 150 150 140 120
- سرعة التوقف الحر n دورة في الدقيقة 400
الطاقة الناتجة 1;7) 44 44 50 50 50
- الطاقة المستمرة P كيلوواط
الوزن - المحرك m kg 69
- محرك مع فرامل تثبيت m kg 81
- محرك مع فرامل سفر m kg 92

هيدروليكي

الضغط الاسمي p بار 250
الفرق في الضغط، مستمر. 2;6;7;8) Δp بار 250
- للزيت المعدني (HL، HLP)
الفرق في الضغط، الذروة 3; 6;7;8) Δp بار 450 400
- للزيت المعدني (HL، HLP)
ضغط المدخل6) المنفذ "أ" أو "ب" p بار 470 420
الضغط المجمع 4; 6) المنفذ "A" + "B" p بار 470 420
ضغط صرف الحالة، الحد الأقصى. pmax بار 10
ضغط التبديل (تبديل الإزاحة) بار 10 إلى 30
السائل الهيدروليكي 5) زيت معدني (HL، HLP) وفقًا لـ DIN 51 524
نطاق درجة حرارة السائل الهيدروليكي Θ ℃ -20 إلى 80
نطاق اللزوجة ν mm2/s 10 إلى 2000
نظافة السائل: الحد الأقصى المسموح به لدرجة تلوث السائل وفقًا لـ NAS 1638 الفئة 9. لذلك نوصي باستخدام فلتر بمعدل احتجاز أدنى β10 ≥75.

فرامل

فرامل تثبيت (فرامل قرصية)
عزم التثبيت T لا شيء جديد 7000
ضغط الإطلاق p بار الحد الأدنى 15؛ الحد الأقصى 30
فرامل السفر (فرامل أسطوانية) انظر الجدول الصفحة 10

1) القيم المُعطاة تسري بعد 100 ساعة من وقت التشغيل التجريبي

2) التشغيل المستمر

3) قد تحدث القيم القمية لمدة أقصاها ثانية واحدة فقط خلال دقيقة التشغيل

4) نوصي Pالحد الأدنى = 15 بار في خط الإرجاع

5) السوائل الصديقة للبيئة HETG وHEPG وHEES وفقاً لـ RE 90 221

6) عند تشغيل المحركات على التوالي، يُرجى استشارة مكتبنا الفني

7) ⚠ تحذير: عند تشغيل المحرك (لمدة 20 ساعة على الأقل)، يُرجى ملاحظة أنه: يجب عدم تشغيل المحرك بدون حمل بأكثر من 50% من السرعة القصوى.

8) بالنسبة لنهاية العمود المفرد "L60"، أقصى فرق ضغط مسموح به Δp = 250 بار

البيانات الفنية (قيم متوسطة، مُقاسة عند ν = 46 مم2/ثانية و θ = 45 درجة مئوية)

ملاحظات حول البيانات الفنية

T = العزم بـ نيوتن.متر qV = التدفق الداخل لتر/دقيقة qVL = تدفق تصريف الغلاف لتر/دقيقة
- تنطبق جميع العزوم على المحركات التي اجتازت فترة التشغيل التجريبي (انظر الملاحظة ص 4، الحاشية 7)
-للوضع "نصف الإزاحة" اضرب عزم الدوران- و qV-القيم بواسطة 0.5.
-لا تنطبق قيم عزم الدوران عند نصف الإزاحة على كلا اتجاهي الدوران بل فقط على الاتجاه المفضل للدوران المميز (انظر الصفحات 7-9)
حجم 780 1250
السرعة n بالدورة في الدقيقة 0 25 50 100 150 0 25 50 100 150
الفرق في الضغط Δp بالبار 100 T لا شيء جديد 806 994 1049 1029 911 1094 1818 1726 1517 1309
qV لتر/دقيقة 0,3 19,8 39,47 79,00 118,2 1,00 32,09 63,73 126,69 189,30
qVL لتر/دقيقة 0,15 0,15 0,24 0,50 0,60 0,50 0,56 0,63 0,76 0,90
200 T لا شيء جديد 1736 2232 2282 2232 2158 2586 3669 3684 3497
qV لتر/دقيقة 0,60 20,10 39,80 79,50 118,8 2,86 33,03 64,63 127,82
qVL لتر/دقيقة 0,30 0,30 0,40 0,75 0,9 1,43 1,44 1,45 1,46
300 T لا شيء جديد 2604 3348 3422 3348 4178 5550 5574
qV لتر/دقيقة 0,80 20,30 40,00 80,00 4,08 34,08 66,16
qVL لتر/دقيقة 0,40 0,40 0,50 1,00 2,04 2,10 2,16
400 T لا شيء جديد 3472 4464 4563 5730 7432 7416
qV لتر/دقيقة 1,40 20,90 40,80 5,68 35,11 67,35
qVL لتر/دقيقة 0,70 0,70 0,90 2,84 2,92 3,00
450 T لا شيء جديد 3906 5022 5134
qV لتر/دقيقة 1,6 21,10 41,00
qVL لتر/دقيقة 0,80 0,8 1,00
حجم 940 1340
السرعة n بالدورة في الدقيقة 0 25 50 100 150 0 25 50 100
الفرق في الضغط Δp بالبار 100 T لا شيء جديد 971 1198 1264 1240 1098 1182 1964 1865 1639
qV لتر/دقيقة 1,00 23,80 47,47 95,00 142,20 1,00 34,61 68,78 136,76
qVL لتر/دقيقة 0,15 0,15 0,24 0,50 0,60 0,50 0,56 0,63 0,76
200 T لا شيء جديد 2091 2690 2750 2689 2793 3962 3979 3777
qV لتر/دقيقة 0,60 24,10 47,80 95,50 2,86 35,56 69,68 137,93
qVL لتر/دقيقة 0,30 0,30 0,40 0,75 1,43 1,44 1,45 1,46
300 T لا شيء جديد 3137 4035 4124 4512 5994 6020
qV لتر/دقيقة 0,80 24,30 48,00 4,08 36,64 71,24
qVL لتر/دقيقة 0,40 0,40 0,50 2,04 2,10 2,16
400 T لا شيء جديد 4183 5380 5500 6188 8027 8010
qV لتر/دقيقة 1,40 24,90 48,80 5,68 37,67 72,50
qVL لتر/دقيقة 0,70 0,70 0,90 2,84 2,92 3,00
450 T لا شيء جديد 4706 6052 6187
qV لتر/دقيقة 1,60 25,10 49,00
qVL لتر/دقيقة 0,80 0,80 1,00
حجم 1120
السرعة n بالدورة في الدقيقة 0 25 50 100 150
الفرق في الضغط Δp بالبار 100 T لا شيء جديد 980 1629 1547 1360 1173
qV لتر/دقيقة 1,00 28,82 57,19 113,62 169,80
qVL لتر/دقيقة 0,50 0,56 0,63 0,76 0,90
200 T لا شيء جديد 2317 3287 3301 3134
qV لتر/دقيقة 2,86 29,76 58,07 114,71
qVL لتر/دقيقة 1,43 1,44 1,45 146
300 T لا شيء جديد 3743 4973 4994
qV لتر/دقيقة 4,08 30,76 59,49
qVL لتر/دقيقة 2,04 2,10 2,16
400 T لا شيء جديد 5134 6660 6645
qV لتر/دقيقة 5,68 31,76 60,87
qVL لتر/دقيقة 2,84 2,92 3,00