شركة ونزهو برانس للمعدات الهيدروليكية المحدودة
A6VM Variable Displacement Bent Axis Motor
The A6VM variable displacement bent-axis motor is selected around the required torque-speed envelope and control behavior. Its available displacement settings can cover different operating points, but each setting remains subject to pressure, speed and duty limits.
- محرك ذات محور منحني متغير
- Multiple displacement-control arrangements
- Flushing and boost valve options
- Counterbalance configuration must be specified
PRANCE HYDRAULIC · PRODUCT SERIES
Axial piston; bent axis, variable displacement · Confirm open or closed circuit configuration
The A6VM variable displacement bent-axis motor is selected around the required torque-speed envelope and control behavior. Its available displacement settings can cover different operating points, but each setting remains subject to pressure, speed and duty limits.
Model

Confirm the complete model and approved specification with Prance Hydraulic. Product-series references alone do not establish interchangeability.
Configuration review · Technical documentation · Product selection
تفاصيل المنتج
- محرك ذات محور منحني متغير
- Multiple displacement-control arrangements
- Flushing and boost valve options
- Counterbalance configuration must be specified
CATEGORIES: محرك مكبس, محرك مكبس متغير الإزاحة
A6VM Features & Application
محرك ذات محور منحني متغير
Specify the displacement range or switching arrangement and verify performance at each required setting.
Multiple displacement-control arrangements
Match the complete control option and its command requirements to the existing controller. Similar housings can use different control arrangements.
Flushing and boost valve options
Account for pilot or replenishment demand and the relevant pressure limits. Include filtration and the return or drain route in the circuit review.
Counterbalance configuration must be specified
Specify the full MS order code, installation drawing and operating duty so the quotation can identify the proposed configuration.
A6VM Specifications
| Series / model | A6VM |
|---|---|
| Product type | A6VM Variable Displacement Bent Axis Motor |
| تصميم | Axial piston; bent axis, variable displacement |
| Circuit / selection | Confirm open or closed circuit configuration |
| Published technical-table sizes | 28, 55, 80, 107, 140 and 160 |
| Displacement and control | Match size and control to the exact offered configuration |
A6VM Selection & Configuration
The A6VM variable displacement bent-axis motor is selected around the required torque-speed envelope and control behavior. Its available displacement settings can cover different operating points, but each setting remains subject to pressure, speed and duty limits.
Compare starting, continuous and high-speed duty separately. Provide the control type and desired displacement on loss of command or pilot pressure. Confirm whether flushing, boost or counterbalance components are included rather than inferring them from the product photograph.

Your Application.
The Right Configuration.
Hydraulic pumps · Hydraulic motors · Hydraulic valves
Send the MS nameplate, operating requirements and installation drawing for a configuration review before quoting.
- Model review — send the full model code or an existing nameplate photograph.
- Interface matching — confirm shaft, mounting flange, rotation and ports.
- Operating conditions — provide flow, pressure, speed, fluid and duty cycle.
- Documentation — request the relevant product data and drawings for your review.

A6VM Buying Guide
Use this sequence to prepare the A6VM configuration for review and quotation.
- Define starting and continuous torque, speed range and duty cycle.
- Specify available flow, work-port pressure difference and return pressure.
- Confirm the displacement setting and required behavior during starting and stopping.
- Check shaft, mounting pilot, flange, port orientation and external loads.
- Review case drainage, replenishment and any displacement control.
- Specify fluid conditions and any independent braking requirement.
- Approve the complete model, operating envelope, drawing and quantity.

Selection, Documentation & Project Support

Selection Support
Learn more →Share your hydraulic circuit, operating point and installation requirements for a configuration discussion.
Flow · Pressure · Speed · Interfaces

Technical Resources
Learn more →Review product documentation, model codes and technical data before finalizing the specification.
Datasheets · Model codes · Drawings

Project Inquiries
Learn more →Send your required model, quantity, application and project requirements to discuss your inquiry.
Product inquiries · Configuration review
Configuration, Quantity & Delivery
Confirm the complete MS code, approved drawing and operating limits. Availability, quantity, documentation and delivery date are confirmed in the quotation.
Discuss Your A6VM Application
Send the full model code, operating duty, installation details and quantity.
Request a A6VM QuotationA6VM Questions Before Ordering
What type of product is the A6VM?
AA6VM Variable Displacement Bent Axis Motor. Design: Axial piston; bent axis, variable displacement. Confirm open or closed circuit configuration. Confirm the complete order code for the offered version.
Can a similar motor replace the A6VM?
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
A6VM Technical Data & Documents
View A6VM catalog data and operating conditions
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
البيانات الفنية
| حجم | غير مقبول | 28 | 55 | 80 | 107 | 140 | 160 | ||
| Geometric displacement, per revolution1) | Vgmax | سم3 | 28.1 | 54.8 | 80 | 107 | 140 | 160 | |
| Vgmin | سم3 | 0 | 0 | 0 | 0 | 0 | 0 | ||
| Vgx | سم3 | 18 | 35 | 51 | 68 | 88 | 61 | ||
| Maximum rotational speed2)(مع الالتزام بأقصى تدفق للمدخل المسموح به) | عند Vgmax | nالاسمية | دورة في الدقيقة | 5550 | 4450 | 3900 | 3550 | 3250 | 3100 |
| عند Vg<Vgx | nالحد الأقصى | دورة في الدقيقة | 8750 | 7000 | 6150 | 5600 | 5150 | 4900 | |
| where Vgo | nالحد الأقصى | دورة في الدقيقة | 10450 | 8350 | 7350 | 6300 | 5750 | 5500 | |
| تدفق المدخل3) | at nnom and Vgmax | qvmax | ل/دقيقة | 156 | 244 | 312 | 380 | 455 | 496 |
| عزم الدوران4) | عند Vgmax and Δp=400bar | T | لا شيء جديد | 179 | 349 | 509 | 681 | 891 | 1019 |
| عند Vgmax and Δp= 350bar | T | لا شيء جديد | 157 | 305 | 446 | 596 | 778 | 891 | |
| صلابة الدوران | Vgmax إلى Vg/2 | cالحد الأدنى | ك.ن.م/راديان | 6 | 10 | 16 | 21 | 34 | 35 |
| Vg/2 to 0 (interpolated) | cالحد الأدنى | ك.ن.م/راديان | 18 | 32 | 48 | 65 | 93 | 105 | |
| عزم القصور الذاتي للمجموعة الدوارة | JTW | كجم متر2 | 0.0014 | 0.0042 | 0.008 | 0.127 | 0.0207 | 0.0253 | |
| التسارع الزاوي الأقصى | α | راديان/ثانية2 | 47000 | 31500 | 24000 | 19000 | 11000 | 11000 | |
| حجم الحالة | V | l | 0.5 | 0.75 | 1.2 | 1.5 | 1.8 | 2.4 | |
| Weight approx. | m | kg | 16 | 28 | 36 | 46 | 61 | 62 | |
| حجم | غير مقبول | 200 | 250 | 355 | 500 | 1000 | ||
| Geometric displacement, per revolution1) | Vgmax | سم3 | 200 | 250 | 355 | 500 | 1000 | |
| Vgmin | سم3 | 0 | 0 | 0 | 0 | 0 | ||
| Vgx | سم3 | 76 | 205 | 300 | 417 | 1000 | ||
| Maximum rotational speed2)(مع الالتزام بأقصى تدفق للمدخل المسموح به) | عند Vgmax | nالاسمية | دورة في الدقيقة | 2900 | 2700 | 2240 | 2000 | 1600 |
| عند Vg<Vgx | nالحد الأقصى | دورة في الدقيقة | 4600 | 3300 | 2650 | 2400 | 1600 | |
| where Vgo | nالحد الأقصى | دورة في الدقيقة | 5100 | 3300 | 2650 | 2400 | 1600 | |
| تدفق المدخل3) | at nnom and Vgmax | qvmax | ل/دقيقة | 580 | 675 | 795 | 1000 | 1600 |
| عزم الدوران4) | عند Vgmax and Δp=400bar | T | لا شيء جديد | 1273 | - | - | - | - |
| عند Vgmax and Δp= 350bar | T | لا شيء جديد | 1114 | 1391 | 1978 | 2785 | 5571 | |
| صلابة الدوران | Vgmax إلى Vg/2 | cالحد الأدنى | ك.ن.م/راديان | 44 | 60 | 75 | 115 | 281 |
| Vg/2 to 0 (interpolated) | cالحد الأدنى | ك.ن.م/راديان | 130 | 181 | 262 | 391 | 820 | |
| عزم القصور الذاتي للمجموعة الدوارة | JTW | كجم متر2 | 0.0353 | 0.061 | 0.102 | 0.178 | 0.55 | |
| التسارع الزاوي الأقصى | α | راديان/ثانية2 | 11000 | 10000 | 8300 | 5500 | 4000 | |
| حجم الحالة | V | l | 2.7 | 3.00 | 5.0 | 7.0 | 16.0 | |
| Weight approx. | m | kg | 78 | 100 | 170 | 210 | 430 | |
نطاق السرعة
السرعة الدورانية الدنيا nالحد الأدنى is not restricted. Please consult us regarding applications requiring uniformity of the rotatory motion at low speeds. 1)The minimum and maximum displacement can be steplessly adjusted,(standard setting for sizes 250 to 1000 if ordering code is missing.Vgالحد الأدنى =0.2×Vgالحد الأقصى,cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limitsجي ماكس = Vgماx) 2) The values are applicable: -for the optimum viscosity range from VاختيارcURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits2/s -with hydraulic fluid based on mineral oils 3)Observe limitation of displacement due to counterbalance valve 4) Torque without radial force, with radial force.ملاحظة
▶Theoretical values, without efficiency and tolerances;values rounded ▶Operation above the maximum values or below the minimum Values may result in a loss of function, a reducd service life or in the destruction of the axial piston unit. Other permissible limit values, such as speed variation, reduced angular acceleration as a function of the frequency and the permissible angular acceleration at start (lower than the maximum angular acceleration) can be found in data sheet 90261.cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
| تحديد خصائص التشغيل | ||
| تدفق المدخل | qv=(Vg×n)/(1000×ηv) | [i/min] |
| سرعة الدوران | n=(qv×1000×ηv)/Vg | [rpm] |
| عزم الدوران | T=(Vg×Δp×ηhm)/(20×π) | [نيوتن متر] |
| طاقة | P=(2π×T×ن)/60000=(qv×Δp×ηt)/600 | [ك.و] |
مفتاح
Vg=الإزاحة لكل دورة [سم3] Δp=Differential pressure [bar] n=Rotational speed [rpm] ηv=Volumetric efficiency ηhm=Hydraulic-mechanical efficiency ηt=Total efficiency (nt=nv × nhm)Watch A6VM Product Video
Related Selection Resources
Request a A6VM Quotation
أخبرنا بالتكوين المطلوب، الكمية والتطبيق.
اكتب رمزاً
| 01 | 02 | 03 | 04 | 05 | 06 | 07 | 08 | 09 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | |||
| A6V | M | / | 63 | W | - | V | - |
السائل الهيدروليكي
| 01 | Mineral oil and HFD. HFD for sizes 250 to 1000 only in conjunction with long-life bearing "L"(without code) | ||
| HFB, HFC hydraulic fluid | Size 28 to 200 (without code) | ||
| Sizes 250 to 1000(only in conjunction with long-life bearings"L") | E | ||
وحدة كباس محوري
| 02 | Bent-axis design, variable | A6V |
تحمل عمود القيادة
| 28...200 | 250 | 355 | 500 | 1000 | |||
| 03 | Standard bearings (without code) | ● | ● | ● | ● | - | |
| Long-life bearings | - | ● | ● | ● | ● | L |
نمط التشغيل
| 04 | Motor (plug-in motor A6VE, see data sheet 91606) | M |
المقاس (NG)
| 05 | الإزاحة الهندسية | 28 | 55 | 80 | 107 | 140 | 160 | 200 | 250 | 355 | 500 | 1000 |
جهاز تحكم1)
| 06 | تحكم تناسبي، هيدروليكي | Δpst =10 bar | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | HD1 | |
| Δpst =25 bar | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | HD2 | |||
| Δpst =35 bar | - | - | - | - | - | - | - | ● | ● | ● | ● | HD3 | |||
| تحكم نسبي، كهربائي | الجهد = 12 فولت | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | EP1 | ||
| الجهد = 24 فولت | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | EP2 | |||
| Two-point control, hydraulic | - | - | - | - | - | - | - | ● | ● | ● | ● | HZ | |||
| ● | - | - | - | ● | ● | ● | - | - | - | - | HZ1 | ||||
| - | ● | ● | ● | - | - | - | - | - | - | - | HZ3 | ||||
| تحكم بنقطتين، كهربائي | الجهد = 12 فولت | ● | - | - | - | ● | ● | ● | ● | ● | ● | ● | إي زي 1 | ||
| الجهد = 24 فولت | ● | - | - | - | ● | ● | ● | ● | ● | ● | ● | EZ2 | |||
| الجهد = 12 فولت | - | ● | ● | ● | - | - | - | - | - | - | - | EZ3 | |||
| الجهد = 24 فولت | - | ● | ● | ● | - | - | - | - | - | - | - | EZ4 | |||
| Automatic control,
متعلق بالضغط العالي |
With minimum pressure increase
Δp≤approx.10 bar With pressure increase Δp= 100bar |
● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | HA1 | ||
| ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | HA2 | ||||
| تحكم آلي، متعلق بالسرعة
pst/pHD=3/100 Hydraulic travel direction valve |
- | - | - | - | - | - | - | ● | ● | ● | ○ | دا | |||
| pst/pHD=5/100 | Hydraulic travel direction valve | ● | ● | ● | ● | ● | ● | ● | - | - | - | - | DA1 | ||
| Electric travel direction valve+
electric Vg ماx circuit |
الجهد = 12 فولت | ● | ● | ● | ● | ● | ● | ● | - | - | - | - | DA2 | ||
| الجهد = 24 فولت | ● | ● | ● | ● | ● | ● | ● | - | - | - | - | DA3 | |||
| pst/pHD=8/100 | Hydraulic travel direction valve | ● | ● | ● | ● | ● | ● | ● | - | - | - | - | DA4 | ||
| Electric travel direction valve+
electric Vg ماx circuit |
الجهد = 12 فولت | ● | ● | ● | ● | ● | ● | ● | - | - | - | - | DA5 | ||
| الجهد = 24 فولت | ● | ● | ● | ● | ● | ● | ● | - | - | - | - | DA6 | |||
| 28 | 55 | 80 | 107 | 140 | 160 | 200 | 250 | 355 | 500 | 1000 | ||||
| 07 | بدون تحكم في الضغط / التجاوز | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ||
| التحكم في الضغط | إعداد ثابت | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | D | |
| Hydraulic override, two-point | ● | ● | ● | ● | ● | ● | ● | 2) | 2) | 2) | 2) | E | ||
| Hydraulic remote control, proportional | - | - | - | - | - | - | - | ● | ● | ● | ● | G | ||
•=Available ○= On request - =Not available
1)Specify response time damping when ordering (sizes 28 to 200)
2) 2nd pressure setting fitted as standard with Version D (sizes 250 to 1000)
تجاوزات للتحكمات HA1 و HA2
| 28 | 55 | 80 | 107 | 140 | 160 | 200 | 250 | 355 | 500 | 1000 | ||||
| 08 | Without override (without code) | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ||
| Hydraulic override, remote control, proportional | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | T | ||
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | الجهد = 12 فولت | ● | ● | ● | ● | ● | ● | ● | - | - | - | - | U1 | |
| الجهد = 24 فولت | ● | ● | ● | ● | ● | ● | ● | - | - | - | - | يو تو | ||
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | الجهد = 12 فولت | ● | ● | ● | ● | ● | ● | ● | - | - | - | - | R1 | |
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | الجهد = 24 فولت | ● | ● | ● | ● | ● | ● | ● | - | - | - | - | R2 | |
مسلسل
| 09 | السلسلة 6، الفهرس 3 | 63 |
اتجاه الدوران
| 10 | مشاهد على عمود القيادة، ثنائي الاتجاه | W |
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits3)
| 28 | 55 | 80 | 107 | 140 | 160 | 200 | 250 | 355 | 500 | 1000 | |||
| 11 | Vgmin cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limitsgmax | ● | ● | ● | ● | ● | ● | ● | - | - | - | - | |
| Vgmin =0 to 0.4 Vgmax Vgmax =Vgmax إلى 0.8 فولتgmax | - | - | - | - | - | - | - | ● | ● | ● | ● | 1 | |
| Vgmin > 0.4 فولتgmax إلى 0.8 فولتgmax Vgmax =Vgmax إلى 0.8 فولتgmax | - | - | - | - | - | - | - | ● | ● | ● | ● | 2 | |
مادة مانعة للتسرب
| 12 | FKM (إيلاستومر فلوري) | V |
عمود الدوران
| 28 | 55 | 80 | 107 | 140 | 160 | 200 | 250 | 355 | 500 | 1000 | |||
| 13 | Splined shaft DIN 5480 | ● | ● | ● | ● | ● | ● | ● | - | - | - | - | A |
| ● | ● | ● | ● | ● | ● | - | ● | ● | ● | ● | Z | ||
| عمود متوازي مسنن DIN 6885 | - | - | - | - | - | - | - | ● | ● | ● | ● | P | |
شفة التركيب
| 28 | 55 | 80 | 107 | 140 | 160 | 200 | 250 | 355 | 500 | 1000 | |||
| 14 | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | ذو 4 ثقوب | ● | ● | ● | ● | ● | ● | ● | ● | - | - | - |
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | - | - | - | - | - | - | - | - | ● | ● | ● | ||
Port plate for working line4)
| 28 | 55 | 80 | 107 | 140 | 160 | 200 | 250 | 355 | 500 | 1000 | ||||||
| 15 | منافذ العمل SAE أ و ب في الخلف | 01 | 0 | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | 010 | |
| 7 | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | 017 | ||||
| SAE working ports A and B lateral, opposite | 02 | 0 | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | 020 | ||
| 7 | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | 027 | ||||
| SAE working ports A and B lateral, opposite + rear | 15 | 0 | - | - | - | - | - | - | - | ● | ● | ● | ● | 150 | ||
| Port plate with 1-stage pressure-relief valves for,mountinga counterbalance valve5) | for BVD20 | 37 | 0 | - | - | - | ● | - | - | - | - | - | - | - | 370 | |
| 8 | - | - | - | ● | - | - | - | - | - | - | - | 378 | ||||
| for BVD20/BVD25 | 38 | 0 | - | ● | ● | ● | ● | ● | ● | ●6) | - | - | - | 380 | ||
| 8 | - | ● | ● | ● | ● | ● | ● | ●6) | - | - | - | 388 | ||||
| for BVE | 38 | 0 | - | - | - | ● | ● | ● | ● | - | - | - | - | 380 | ||
| 8 | - | - | - | ● | ● | ● | ● | - | - | - | - | 388 | ||||
0=Without valve
7=Flushing and boost-pressure valve, mounted
8=Counterbalance valve mounted7)
•=Available ○= On request - =Not available
3)Please specify exact settings for Vgmin and Vgmax in plain text when ordering:Vgmin=...cm3,Vgmax=...cm3
4) Fastening thread,metric
5) Only possible in combination with HD,EP and HA control.
6) Type code for counterbalance valve to be quoted separately in accordance with data sheet 95522- BVD or 95525-BVE.
7) Counterbalance valve MHB32,please contact us.
حساس السرعة
| 28 | 55 | 80 | 107 | 140 | 160 | 200 | 250 | 355 | 500 | 10008) | |||
| 16 | بدون حساس سرعة (بدون رمز) | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | O |
| مجهز لحساس سرعة القرص الصلب | ▲ | ▲ | ▲ | ▲ | ▲ | ▲ | ▲ | ● | ● | ● | - | F | |
| مستشعر سرعة القرص الصلب مركب9) | ▲ | ▲ | ▲ | ▲ | ▲ | ▲ | ▲ | ● | ● | ● | - | H | |
| Prepared for DSM/DSA speed sensor | ● | ● | ● | ● | ● | ● | ● | - | - | - | - | U | |
| DSM/DSA speed sensor mounted9) | ● | ● | ● | ● | ● | ● | ● | - | - | - | - | V | |
Swivel angel sensor
| 28 | 55 | 80 | 107 | 140 | 160 | 200 | 250 | 355 | 500 | 1000 | |||
| 17 | Without swivel angle sensor | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | - | |
| مستشعر زاوية الدوران البصرية | - | - | - | - | - | - | - | ● | ● | ● | ● | V | |
| مستشعر زاوية الدوران الكهربائي | - | - | - | - | - | - | - | ● | ● | ● | ● | E | |
موصل للملفات اللولبية
| 28 to 200 | 250 to 1000 | |||
| 18 | Without connector (without solenoid, with hydraulic control only)(sizes 250 to 1000) | ● | - | O |
| - | ● | |||
| DEUTSCH molded connector, 2-pin-without suppressor diode | ● | - | P | |
| HIRSCHMANN connector-without suppressor diode | - | ● | ||
بداية التحكم
| 28 | 55 | 80 | 107 | 140 | 160 | 200 | 250 | 355 | 500 | 1000 | |||
| 19 | At Vgmin (المعيار لـ HA) | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | A |
| عند Vgmax(المعيار لـ HD، HZ، EP، EZ، DA) | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | B | |
الإصدار القياسي/الخاص
| 20 | الإصدار القياسي | |
| Standard version with installation variants, e.g. T ports open or closed, contrary to standard | -Y | |
| Specialversion | -S |
•=Available ○= On request ▲=Not for new projects - =Not available
ملاحظة
بالإضافة إلى رمز النوع، يرجى تحديد البيانات الفنية ذات الصلة عند تقديم طلبك.
8) Please contact us.
9) Specify type code separately for sensor in accordance with data sheet 95132-DSM or 95133-DSA,95135-HDD and observe the requirements for the electronics.
البيانات الفنية
| حجم | غير مقبول | 28 | 55 | 80 | 107 | 140 | 160 | ||
| Geometric displacement, per revolution1) | Vgmax | سم3 | 28.1 | 54.8 | 80 | 107 | 140 | 160 | |
| Vgmin | سم3 | 0 | 0 | 0 | 0 | 0 | 0 | ||
| Vgx | سم3 | 18 | 35 | 51 | 68 | 88 | 61 | ||
| Maximum rotational speed2)(مع الالتزام بأقصى تدفق للمدخل المسموح به) | عند Vgmax | nالاسمية | دورة في الدقيقة | 5550 | 4450 | 3900 | 3550 | 3250 | 3100 |
| عند Vg<Vgx | nالحد الأقصى | دورة في الدقيقة | 8750 | 7000 | 6150 | 5600 | 5150 | 4900 | |
| where Vgo | nالحد الأقصى | دورة في الدقيقة | 10450 | 8350 | 7350 | 6300 | 5750 | 5500 | |
| تدفق المدخل3) | at nnom and Vgmax | qvmax | ل/دقيقة | 156 | 244 | 312 | 380 | 455 | 496 |
| عزم الدوران4) | عند Vgmax and Δp=400bar | T | لا شيء جديد | 179 | 349 | 509 | 681 | 891 | 1019 |
| عند Vgmax and Δp= 350bar | T | لا شيء جديد | 157 | 305 | 446 | 596 | 778 | 891 | |
| صلابة الدوران | Vgmax إلى Vg/2 | cالحد الأدنى | ك.ن.م/راديان | 6 | 10 | 16 | 21 | 34 | 35 |
| Vg/2 to 0 (interpolated) | cالحد الأدنى | ك.ن.م/راديان | 18 | 32 | 48 | 65 | 93 | 105 | |
| عزم القصور الذاتي للمجموعة الدوارة | JTW | كجم متر2 | 0.0014 | 0.0042 | 0.008 | 0.127 | 0.0207 | 0.0253 | |
| التسارع الزاوي الأقصى | α | راديان/ثانية2 | 47000 | 31500 | 24000 | 19000 | 11000 | 11000 | |
| حجم الحالة | V | l | 0.5 | 0.75 | 1.2 | 1.5 | 1.8 | 2.4 | |
| Weight approx. | m | kg | 16 | 28 | 36 | 46 | 61 | 62 | |
| حجم | غير مقبول | 200 | 250 | 355 | 500 | 1000 | ||
| Geometric displacement, per revolution1) | Vgmax | سم3 | 200 | 250 | 355 | 500 | 1000 | |
| Vgmin | سم3 | 0 | 0 | 0 | 0 | 0 | ||
| Vgx | سم3 | 76 | 205 | 300 | 417 | 1000 | ||
| Maximum rotational speed2)(مع الالتزام بأقصى تدفق للمدخل المسموح به) | عند Vgmax | nالاسمية | دورة في الدقيقة | 2900 | 2700 | 2240 | 2000 | 1600 |
| عند Vg<Vgx | nالحد الأقصى | دورة في الدقيقة | 4600 | 3300 | 2650 | 2400 | 1600 | |
| where Vgo | nالحد الأقصى | دورة في الدقيقة | 5100 | 3300 | 2650 | 2400 | 1600 | |
| تدفق المدخل3) | at nnom and Vgmax | qvmax | ل/دقيقة | 580 | 675 | 795 | 1000 | 1600 |
| عزم الدوران4) | عند Vgmax and Δp=400bar | T | لا شيء جديد | 1273 | - | - | - | - |
| عند Vgmax and Δp= 350bar | T | لا شيء جديد | 1114 | 1391 | 1978 | 2785 | 5571 | |
| صلابة الدوران | Vgmax إلى Vg/2 | cالحد الأدنى | ك.ن.م/راديان | 44 | 60 | 75 | 115 | 281 |
| Vg/2 to 0 (interpolated) | cالحد الأدنى | ك.ن.م/راديان | 130 | 181 | 262 | 391 | 820 | |
| عزم القصور الذاتي للمجموعة الدوارة | JTW | كجم متر2 | 0.0353 | 0.061 | 0.102 | 0.178 | 0.55 | |
| التسارع الزاوي الأقصى | α | راديان/ثانية2 | 11000 | 10000 | 8300 | 5500 | 4000 | |
| حجم الحالة | V | l | 2.7 | 3.00 | 5.0 | 7.0 | 16.0 | |
| Weight approx. | m | kg | 78 | 100 | 170 | 210 | 430 | |
نطاق السرعة
السرعة الدورانية الدنيا nالحد الأدنى is not restricted. Please consult us regarding applications requiring uniformity of the rotatory motion at low speeds.
1)The minimum and maximum displacement can be steplessly adjusted,(standard setting for sizes 250 to 1000 if ordering code is missing.Vgالحد الأدنى =0.2×Vgالحد الأقصى,cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limitsجي ماكس = Vgماx)
2) The values are applicable:
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limitsاختيارcURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits2/s
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
ملاحظة
▶القيم النظرية، بدون الكفاءة والتحملات؛ القيم مقربة
▶العمل فوق القيم القصوى أو تحت القيم الدنيا قد يؤدي إلى فقدان الوظيفة، تقليل عمر الخدمة أو تدمير وحدة المكبس المحوري. يمكن العثور على قيم الحد المسموح بها الأخرى، مثل تغير السرعة، تقليل التسارع الزاوي كوظيفة للتردد والتسارع الزاوي المسموح عند البدء (أقل من التسارع الزاوي الأقصى) في ورقة البيانات 90261.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

| تحديد خصائص التشغيل | ||
| تدفق المدخل | qv=(Vg×n)/(1000×ηv) | [i/min] |
| سرعة الدوران | n=(qv×1000×ηv)/Vg | [rpm] |
| عزم الدوران | T=(Vg×Δp×ηhm)/(20×π) | [نيوتن متر] |
| طاقة | P=(2π×T×ن)/60000=(qv×Δp×ηt)/600 | [ك.و] |
مفتاح
Vg=الإزاحة لكل دورة [سم3]
Δp=الضغط التفريقي [بار]
n=Rotational speed [rpm]
ηv=الكفاءة الحجمية
ηhm=الكفاءة الهيدروليكية الميكانيكية
ηt=Total efficiency (nt=nv × nhm)







