A10VNO Open Circuit Variable Piston Pump

The A10VNO variable displacement pump uses a swashplate rotary group for open-circuit systems. Its existing technical table separates inlet, outlet and case-drain limits, which must be checked together at the intended pressure and speed.

  • Swashplate displacement adjustment
  • Open-circuit drive
  • Pressure and flow control
  • Separate inlet and case-drain limits
HOME › Bombas hidráulicas › A10VNO

PRANCE HYDRAULIC · PRODUCT SERIES

A10VNO Open Circuit Variable Piston Pump

Axial piston; variable swashplate · Open circuit

The A10VNO variable displacement pump uses a swashplate rotary group for open-circuit systems. Its existing technical table separates inlet, outlet and case-drain limits, which must be checked together at the intended pressure and speed.

Model

✓cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
A10VNOAxial piston; variable swashplate
Request a QuotationVer Datos Técnicos y Ficha Técnica

Confirm the complete model and approved specification with Prance Hydraulic. Product-series references alone do not establish interchangeability.

Configuration review · Technical documentation · Product selection

Detalles del producto

  • Swashplate displacement adjustment
  • Open-circuit drive
  • Pressure and flow control
  • Separate inlet and case-drain limits

CATEGORIES: Bomba de pistón, Bomba de desplazamiento variable

A10VNO Features & Application

Swashplate displacement adjustment

Specify the full MS order code, installation drawing and operating duty so the quotation can identify the proposed configuration.

Open-circuit drive

Review normal running, startup and reversal where applicable. The pressure and flow requirements can differ between operating states.

Pressure and flow control

Match the complete control option and its command requirements to the existing controller. Similar housings can use different control arrangements.

Separate inlet and case-drain limits

Keep continuous, intermittent and peak conditions separate. Use the row for the selected size and configuration.

A10VNO Specifications

Series / modelA10VNO
Product typeA10VNO Open Circuit Variable Piston Pump
DiseñoAxial piston; variable swashplate
Circuit / selectionOpen circuit
Published nominal sizes28, 45, 63 and 85
Listed nominal outlet pressure210 bar; verify selected configuration
Listed peak outlet pressure250 bar; confirm duty limitations

A10VNO Selection & Configuration

The A10VNO variable displacement pump uses a swashplate rotary group for open-circuit systems. Its existing technical table separates inlet, outlet and case-drain limits, which must be checked together at the intended pressure and speed.

A suitable outlet-pressure rating does not compensate for an unsuitable suction or drain line. Provide reservoir position, suction losses and the drain route, then confirm the pressure/flow control and interface options for the selected size.

A10VNO original product view

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.

Hydraulic pumps · Hydraulic motors · Hydraulic valves

Send the MS nameplate, operating requirements and installation drawing for a configuration review before quoting.

  • Model review — send the full model code or an existing nameplate photograph.
  • Interface matching — confirm shaft, mounting flange, rotation and ports.
  • Operating conditions — provide flow, pressure, speed, fluid and duty cycle.
  • Documentation — request the relevant product data and drawings for your review.
Prance workshop with a row of production equipment

A10VNO Buying Guide

Use this sequence to prepare the A10VNO configuration for review and quotation.

  1. Define required flow at the actual drive speed and continuous pressure.
  2. Identify peak pressure, duration and the work cycle.
  3. Confirm the selected displacement control and any auxiliary-drive requirement.
  4. Match rotation viewed from the shaft end, shaft, flange and ports.
  5. Review inlet conditions, drain routing and the installation envelope.
  6. Confirm fluid, viscosity, temperature, filtration and seals.
  7. Approve the complete model, control, drawing, quantity and delivery terms.
A10VNO original product photograph for installation review

Selection, Documentation & Project Support

Prance technical team image from its company website

Selection Support

Learn more →

Share your hydraulic circuit, operating point and installation requirements for a configuration discussion.


Flow · Pressure · Speed · Interfaces
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

Technical Resources

Learn more →

Review product documentation, model codes and technical data before finalizing the specification.


Datasheets · Model codes · Drawings
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

Project Inquiries

Learn more →

Send your required model, quantity, application and project requirements to discuss your inquiry.


Product inquiries · Configuration review

Configuration, Quantity & Delivery

Confirm the complete MS code, approved drawing and operating limits. Availability, quantity, documentation and delivery date are confirmed in the quotation.

Discuss Your A10VNO Application

Send the full model code, operating duty, installation details and quantity.

Request a A10VNO Quotation

A10VNO Questions Before Ordering

What type of product is the A10VNO?

A10VNO Open Circuit Variable Piston Pump. Design: Axial piston; variable swashplate. Open circuit. Confirm the complete order code for the offered version.

Can a similar pump replace the A10VNO?

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

Define required flow at the actual drive speed and continuous pressure. Identify peak pressure, duration and the work cycle. Attach the nameplate, complete order code, installation drawing and required quantity.

A10VNO Technical Data & Documents

View A10VNO catalog data and operating conditions

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.

Datos técnicos

Rango de presión de operación, entrada

Absolute pressure at port S Pmínimo absoluto—————————12 psi (0,8 bar) Pmáximo absoluto—————————73 psi (5 bar)

Rango de presión de operación, salida

Pressure at port B Nominal pressure PN—————3000 psi (210 bar) Peak pressure Pmadrex——————3600 psi (250 bar) (Pressures to DIN 24312)

Dirección del flujo

De S a B

Presión de drenaje de la caja

Maximum permissible case drain pressure (port Lx): maximum 7 psi (0,5 bar) higher than the inlet pressure at port S, however not higher than 29 psi (2 bar) absolute. PLaboratorios máx—————————29 psi (2 bar)

Tabla de valores (valores teóricos, sin considerar eficiencias y tolerancias; valores redondeados)

Tamaño 28 45 63 85
Desplazamiento Vg máx en3 (cm3) 1.71(28) 2.75 (45) 3.84(63) 5.19(85)
Velocidad2)
máx. a VG máximo n0 máx 11) mín-1 3200 2900 2700 2700
en y0 máx qv0 máx 11) gpm 23.8 34.6 45 60.8
(L/min) (90) (131) (170) (230)
en y0 máx P0 máx 11) HP(kW) 42 (31) 62(46) 79 (59) 107 (80)
a las VG máximo Tmáx lb-pie (Nm) 69 (94) 110 (150) 155 (210) 209 (284)
Rigidez torsional extremo del eje R c lb-ft/rad (Nm/rad) 10882 19480 29770 51029
(14800) (26500) (40500) (69400)
Momento de inercia del grupo rotatorio JTW lb-ft/rad (kgm2) 0.0403 0.0474 0.0949 0.423
(0,001) (0,002) (0,004) (0,006)
Aceleración angular, máx.2) α rad/s2 6800 4900 3500 2500
Volumen de casos V gal(L) 0.08 (0,25) 0.08 (0,3) 0.13 (0,5) 0.21 (0,8)
Peso (con control de pres.) m libras (kg) 25.3 (11,5) 31 (14) 39.7 (18) 48.5 (22)
1)autocebante con presión absoluta de 15 psi (1 bar) en el puerto de entrada S 2) -These values are valid for conditions between the min. required and the max. permissible drive speeds. For external sources of excitation (eg. diesel engine 2-8 fold rotary frequency, cardan shaft 2-fold rotary frequency). -The limit is valid for a single pump. -The load carrying capacity of the connecting parts must be taken into consideration. Caution:Exceeding these limits can lead to a loss of operability, reduction of service life or complete destruction of the axial piston unit. The permissible values can be calculated

Determinación del tamaño de la bomba

Vg=desplazamiento geométrico por revolución en pulgadas3 (cm3) p = pressure differential in psi (bar) n= drive speed in rpm ηv = volumetric efficiency ηMh= mechanical-hydraulic efficiency ηt= eficiencia global (ηt= ηv*ηMh)

Carga radial y axial permisible en el eje de transmisión

Tamaño 28 45 63 85
Fuerza radial, máx. A10VNO technical reference from the existing product documentation en X/2 Fcuántos máximos libra 79 146 225 303
(N) (350) (650) (1000) (1350)
Fuerza axial, máx. A10VNO technical reference from the existing product documentation Fhacha libra 157,4 146 225 303
(N) (700) (650) (1000) (1350)
Watch A10VNO Product Video
A10VNO product video

Request a A10VNO Quotation

Tell us your required configuration, quantity and application.

Demostración de formulario de contacto
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

Código de pedido - Programa estándar

A10VN ○ DRS / 5x - V R C N00
01 02 03 04 05 06 07 08 09 10 11

Unidad de pistones axiales

01 Diseño de plato oscilante, variable, presión nominal 210 bar, presión de pico 250 bar A10VN

Tipo de operación

02 Bomba de circuito abierto ○

Tamaño

28 45 63 85
03 ~Desplazamiento VG máximo en en3 1.71 2.75 3.84 5.19
cm3 28 45 63 85

Dispositivo de control

04 Control de presión
con control de flujo, hidráulico, X-T cerrado DRS

Series

05 Serie 5 Índice 2 - ● ● - 52
Índice 3 ● - - ● 53

Sentido de giro

06 Vista desde el extremo del eje mano derecha R
mano izquierda L

Focas

07 FKM (caucho fluorado) V

Extremo del eje

08 Acanalado según SAE J744 R

Brida de montaje

09 brida SAE de 2 agujeros c

Puertos para líneas de servicio

10 puertos roscados ISO 6149-1 en la parte trasera, métricos - ● - - 40
puertos de brida SAE en la parte trasera, agujeros para pernos métricos ● - ● ● 11

Datos técnicos

Rango de presión de operación, entrada

Presión absoluta en el puerto S

Pmínimo absoluto---------------------------12 psi (0,8 bar)

Pmáximo absoluto---------------------------73 psi (5 bar)

Rango de presión de operación, salida

Presión en el puerto B

Presión nominal PN---------------3000 psi (210 bar)

Presión máxima Pmadrex------------------3600 psi (250 bar)

(Presiones según DIN 24312)

Dirección del flujo

De S a B

Presión de drenaje de la caja

Presión máxima admisible en la carcasa (orificio Lx):

máximo 7 psi (0,5 bar) superior a la presión de entrada en el puerto S, pero no superior a 29 psi (2 bar) absolutos.

PLaboratorios máx---------------------------29 psi (2 bar)

Tabla de valores (valores teóricos, sin considerar eficiencias y tolerancias; valores redondeados)

Tamaño 28 45 63 85
Desplazamiento Vg máx en3 (cm3) 1.71(28) 2.75 (45) 3.84(63) 5.19(85)
Velocidad2)
máx. a VG máximo n0 máx 11) mín-1 3200 2900 2700 2700
Flujo
en y0 máx qv0 máx 11) gpm 23.8 34.6 45 60.8
(L/min) (90) (131) (170) (230)
Poder Δp = 3000 psi (210 bar)
en y0 máx P0 máx 11) HP(kW) 42 (31) 62(46) 79 (59) 107 (80)
Par de torsión Δp = 3000 psi (210 bar)
a las VG máximo Tmáx lb-pie (Nm) 69 (94) 110 (150) 155 (210) 209 (284)
Rigidez torsional extremo del eje R c lb-ft/rad

(Nm/rad)

10882 19480 29770 51029
(14800) (26500) (40500) (69400)
Momento de inercia del grupo rotatorio JTW lb-ft/rad

kg/m²

0.0403 0.0474 0.0949 0.423
(0,001) (0,002) (0,004) (0,006)
Aceleración angular, máx.2) α rad/s2 6800 4900 3500 2500
Volumen de casos V gal(L) 0.08 (0,25) 0.08 (0,3) 0.13 (0,5) 0.21 (0,8)
Peso (con control de pres.) m libras (kg) 25.3 (11,5) 31 (14) 39.7 (18) 48.5 (22)

1)autocebante con presión absoluta de 15 psi (1 bar) en el puerto de entrada S

2) -Estos valores son válidos para condiciones comprendidas entre las velocidades de accionamiento mínimas requeridas y las máximas admisibles.

Para fuentes externas de excitación (ej. frecuencia de giro de 2 a 8 veces del motor diésel, frecuencia de giro de 2 veces del árbol cardán).

-El límite es válido para una sola bomba.

-Se debe tener en cuenta la capacidad de carga de las piezas de unión.

Precaución: Superar estos límites puede provocar una pérdida de operatividad, una reducción de la vida útil o la destrucción completa de la unidad de pistones axiales.

Los valores permitidos se pueden calcular

Determinación del tamaño de la bomba

Flujo qv=(Vg ∙ n ∙ ηv) /231(1000) gpm (L/min)
Par de torsión M=(Vg ∙ Δp) / 24(20) ∙ π ∙ ηMh lb-pie (Nm)
Poder P=(2π ∙ M ∙ n)/33000(60000)=(qv ∙ p)/[1714(600) ∙ ηt]  HP(kW)

Vg=desplazamiento geométrico por revolución en pulgadas3 (cm3)

p = diferencia de presión en psi (bar)

n = velocidad de accionamiento en rpm

ηv = eficiencia volumétrica

ηMh= eficiencia mecánico-hidráulica

ηt= eficiencia global (ηt= ηv*ηMh)

Carga radial y axial permisible en el eje de transmisión

Tamaño 28 45 63 85
Fuerza radial, máx. en X/2 Fcuántos máximos libra 79 146 225 303
(N) (350) (650) (1000) (1350)
Fuerza axial, máx. Fhacha libra 157,4 146 225 303
(N) (700) (650) (1000) (1350)

A10VNO completado