Wenzhou Prance Hydraulic Equipment Co., Ltd
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
The 4WRPEH proportional valve is described with electrical position feedback and integrated electronics. Its technical data identifies a direct-operated spool valve with a steel sleeve. Select the required command interface and spool behavior from the complete model code.
- Direct-operated spool and steel sleeve
- Electrical position feedback
- Integrated electronics (OBE)
- A1 or F1 command variants
PRANCE HYDRAULIC · PRODUCT SERIES
Direct-operated proportional spool valve with steel sleeve · Subplate-mounted electro-hydraulic control
The 4WRPEH proportional valve is described with electrical position feedback and integrated electronics. Its technical data identifies a direct-operated spool valve with a steel sleeve. Select the required command interface and spool behavior from the complete model code.
Modèle

Confirm the complete model and approved specification with Prance Hydraulic. Product-series references alone do not establish interchangeability.
Étude de configuration · Documentation technique · Sélection de produits
Détails du produit
- Direct-operated spool and steel sleeve
- Electrical position feedback
- Integrated electronics (OBE)
- A1 or F1 command variants
CATÉGORIES : Distributeur hydraulique, Valvule proportionnelle
4WRPEH Features & Application
Direct-operated spool and steel sleeve
Keep continuous, intermittent and peak conditions separate. Use the row for the selected size and configuration.
Electrical position feedback
Spool feedback concerns the valve position. Confirm whether the machine also requires separate actuator position or pressure feedback.
Integrated electronics (OBE)
Match the complete control option and its command requirements to the existing controller. Similar housings can use different control arrangements.
A1 or F1 command variants
Match the complete control option and its command requirements to the existing controller. Similar housings can use different control arrangements.
4WRPEH Specifications
| Series / model | 4WRPEH |
|---|---|
| Product type | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits |
| Conception | Direct-operated proportional spool valve with steel sleeve |
| Circuit / selection | Subplate-mounted electro-hydraulic control |
| Listed command variants | A1: ±10 V; F1: 4–20 mA |
| Listed electrical connection | 6P+PE; confirm the approved pin assignment |
| Certification documents | Request documentation for the exact supplied unit where required |
4WRPEH Selection & Configuration
The 4WRPEH proportional valve is described with electrical position feedback and integrated electronics. Its technical data identifies a direct-operated spool valve with a steel sleeve. Select the required command interface and spool behavior from the complete model code.
The series description lists A1 voltage and F1 current interfaces. Match the controller output, connector and wiring to the ordered interface. The switched-off spool position must be checked against the machine circuit; a generic CE claim is not used here as a product certification.

Your Application.
The Right Configuration.
Hydraulic pumps · Hydraulic motors · Hydraulic valves
Send the MS nameplate, operating requirements and installation drawing for a configuration review before quoting.
- Model review — send the full model code or an existing nameplate photograph.
- Interface matching — confirm shaft, mounting flange, rotation and ports.
- Operating conditions — provide flow, pressure, speed, fluid and duty cycle.
- Documentation — request the relevant product data and drawings for your review.

4WRPEH Buying Guide
Use this sequence to prepare the 4WRPEH configuration for review and quotation.
- Select the circuit symbol and required de-energized spool position.
- State working flow, pressure and the pressure-drop condition for rated flow.
- Review spool overlap and command behavior during startup and switch-off.
- Confirm nominal size, subplate pattern, port and seal requirements.
- Match supply voltage, command input, connector and pin assignment.
- Review pilot supply, drain and feedback where the selected valve uses them.
- Approve the exact valve code, circuit drawing, quantity and documentation.

Selection, Documentation & Project Support

Selection Support
Learn more →Share your hydraulic circuit, operating point and installation requirements for a configuration discussion.
Flow · Pressure · Speed · Interfaces

Technical Resources
Learn more →Review product documentation, model codes and technical data before finalizing the specification.
Datasheets · Model codes · Drawings

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
Learn more →cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
Configuration, Quantity & Delivery
Confirm the complete MS code, approved drawing and operating limits. Availability, quantity, documentation and delivery date are confirmed in the quotation.
Discuss Your 4WRPEH Application
Send the full model code, operating duty, installation details and quantity.
Request a 4WRPEH Quotation4WRPEH Questions Before Ordering
What type of product is the 4WRPEH?
4WRPEH Proportional Valve with Integrated Electronics. Design: Direct-operated proportional spool valve with steel sleeve. Subplate-mounted electro-hydraulic control. Confirm the complete order code for the offered version.
Can a similar valve replace the 4WRPEH?
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
Select the circuit symbol and required de-energized spool position. State working flow, pressure and the pressure-drop condition for rated flow. Attach the nameplate, complete order code, installation drawing and required quantity.
4WRPEH Technical Data & Documents
View 4WRPEH catalog data and operating conditions
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
Données techniques(pour des applications en dehors de ces paramètres, veuillez nous consulter)
general
| Conception | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | |
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | |
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | 4.Subplate mounting: Porting pattern according to ISO 4401 | |
| Position d'installation | N'importe lequel | |
| Plage de température ambiante | ℃ | -20 …+60 |
| Storage temperature range with UV protection | ℃ | +10…+40 |
| Transport temperature | ℃ | -30…+80 |
| Sine test according to DIN EN 60068-2-6 | 10…2000 Hz / maximum of 10 g/ 10 cycles/3 axes | |
| Noise test according to DIN EN 60068-2-64 | 20…2000 Hz / 10 gRMS / 30 g peak / 30 min /3 axes | |
| Transport shock according to DIN EN 60068-2-27 | 15g/11 ms/3 axes | |
| Poids | kg | 2.9 |
| Humidité relative maximale (sans condensation) | % | 95 |
| Température maximale de la surface du solénoïde | ℃ | 150 |
| MTTFd value according to EN ISO 13849 | Yaers | 150 (for further details see data sheet 08012) |
Hydraulique
| Huile hydraulique | See table on page 6 | ||||||
| Plage de viscosité | -recommended | mm2/s | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | ||||
| -maximum admissible | mm2/s | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | |||||
| Plage de température du fluide hydraulique (passage fluide) | ℃ | -20 …+70 | |||||
| Degré maximal admissible de contamination du fluide hydraulique, classe de propreté selon ISO 4406 (c) | Classe 18/16/131) | ||||||
| Rated flow at Δp = 35 bar per edge 2) | l/min | 4 | 12 | 15 | 24/25 | 40 | |
| Maximum operating pressure | - Ports A, B, P | bar | 350 | ||||
| -Port T | bar | 250 | |||||
| Limitation of use withregard to the transitionto failsafe(values apply to sum-mated edge) | - Spool symbols C3, C5, C | bar | 350 | 350 | 350 | 350 | 160 |
| -Spool symbols C1, C4 | bar | 350 | 350 | 280 | 250 | 100 | |
| Leakage flow at 100 bar | -Linear characteristic curve L | cm3/min | < 180 | < 300 | – | < 500 | < 900 |
| -Inflected characteristic curve P | cm3/min | < 150 | – | < 180 | < 300 | < 450 | |
static/dynamic
| Hystérésis | % | < 0.1 |
| Plage d'inversion | % | < 0.05 |
| Sensibilité de réponse | % | < 0.05 |
| Manufacturing tolerance qVmax | % | < 10 |
| Temperature drift (temperature range 20℃ … 80 ℃) | Zero shift < 0.25 % with Δ∂= 10 K | |
| Pressure drift | % 100 bar | Zero shift < 0.15 |
| Compensation zéro | Ex factory ±1 % |
| Huile hydraulique | Classification | Suitable sealing materials | Normes | |
| Huiles minérales et hydrocarbures connexes | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | NBR, FKM | DIN 51524 | |
| Biodegradable | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | HETG | NBR, FKM | ISO 15380 |
| HEES | FKM | |||
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | HEPG | FKM | ISO 15380 | |
| Résistant au feu | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | FKM | ISO 12922 |
| -contenant de l'eau | HFC (Fuchs HYDROTHERM 46M, Petrofer Ultra Safe 620) | NBR | ISO 12922 | |
| Important information on hydraulic fluids! ▶There may be limitations regarding the technical valve data (temperature, pressure range, life cycle, maintenance intervals, etc.)! ▶The flash point of the hydraulic fluid used must be 40 K higher than the maximum solenoid surface temperature. ▶Mineral oils and related hydrocarbons: – If mineral oils and related hydrocarbons are used,data sheet 90220 must be complied with! ▶Bio-degradable: – If bio-degradable hydraulic fluids are used, data sheet 90221 must be complied with! ▶Flame-resistant – water-free: – If flame-resistant, water-free hydraulic fluids are used, datasheet 90222 must be complied with! ▶Flame-resistant – containing water: The maximum pressure differential per control edge is 50 bar. Pressure pre-loading atthe tank port > 20 % of the pressure differential; otherwise,increased cavitation. Life cycle as compared to operation with mineral oil HL, HLP 50 % to 100 %. | ||||
electrical, integrated electronics (OBE)
| Relative duty cycle (%) | 100 (continuous operation) |
| Classe de protection selon EN 60529 | IP 65 avec connecteurs enfichables montés et verrouillés |
| Supply voltage Terminal A: Terminal B: Maximum admissible residual ripple | 24 V= At least 19 V=/maximum 36 V= 0V 2.5 Vpp |
| Maximum power consumption | 40 VA |
| Fuse protection, external | 2.5AT |
| Input, version A1 Terminal D: UE Terminal E: | Differential amplifier, Ri = 100 kΩ 0…±10V 0V |
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limitsD-E Terminal E: ID-E | Load, Rsh cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limitsD-E feedback |
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | |
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limitstest Terminal C: | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits |
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limitscURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limitscURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limitscURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits feedback |
| Functional earth and screening | See pin assignment (CE-compliant installation) |
| Adjustment | Calibrated in the factory, see valve characteristic curve |
| Conformité | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits |
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
Related Selection Resources
Request a 4WRPEH Quotation
Tell us your required configuration, quantity and application.
Code de commande
| 01 | 02 | 03 | 04 | 05 | 06 | 07 | 08 | 09 | 10 | 11 | 12 | 13 | 14 | |||
| 4 | WRP | E | H | 6 | B | - | 3X | / | / | 24 | * |
| 01 | 4 ports principaux | 4 |
| 02 | High-response valve, direct operated | WRP |
| 03 | With integrated electronics | E |
| 04 | Control spool/sleeve | H |
| 05 | Size 6 | 6 |
Control spool symbols
| 06 | Symbol | Flow characteristics L | Flow characteristics P | |
![]() |
||||
![]() |
● | ● | c | |
![]() |
● | ● | c1 1) | |
| ● | ● | c4 | ||
![]() |
● | ● | c3 | |
| ● | ● | c5 1) | ||
| 1) With symbols C1 and C5: P→A:qVnom B→T:qVnom/2 P→B:qVnom/2 A→T:qVnom qVnom 2:1 only with rated flow = 40 l/min |
||||
| 07 | Installation side of the inductive position transducer | B |
Rated flow of size 6 with 70 bar valve pressure differential (35 bar/control edge)
| Flow characteristics L | Flow characteristics P | |||
| 8 | 04 l/min | ● | ●(inflection at 40 %) | 04 |
| 12 l/min | ● | 12 | ||
| 15 l/min | ●(inflection at 60 %) | 15 | ||
| 24 l/min | ● | 24 | ||
| 25 l/min | ●(inflection at 60 %) | 25 | ||
| 40 l/min | ● | ●(inflection at 40 %) | 40 | |
●=Delivery range
Flow characteristics
| 09 | Linéaire | L |
| Inflected characteristic curve, linear | P |
| 10 | Component series 30 ... 39 (30 ... 39: Unchanged installation and connection dimensions) | 3X |
Matériau du joint
| 11 | Joints en NBR | M |
| Joints FKM | V |
| 12 | Supply voltage of the integrated electronics: 24 VDC | 24 |
Interfaces de l'électronique de commande
| 13 | Command value input ± 10 V | A1 |
| Valeur de commande entrée 4 ... 20 mA | F1 |
| 14 | Further details in the plain text |
Données techniques(pour des applications en dehors de ces paramètres, veuillez nous consulter)
general
| Conception | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | |
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | |
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | 4.Subplate mounting: Porting pattern according to ISO 4401 | |
| Position d'installation | N'importe lequel | |
| Plage de température ambiante | ℃ | -20 ...+60 |
| Storage temperature range with UV protection | ℃ | +10...+40 |
| Transport temperature | ℃ | -30...+80 |
| Sine test according to DIN EN 60068-2-6 | 10...2000 Hz / maximum of 10 g/ 10 cycles/3 axes | |
| Noise test according to DIN EN 60068-2-64 | 20...2000 Hz / 10 gRMS / 30 g peak / 30 min /3 axes | |
| Transport shock according to DIN EN 60068-2-27 | 15g/11 ms/3 axes | |
| Poids | kg | 2.9 |
| Humidité relative maximale (sans condensation) | % | 95 |
| Température maximale de la surface du solénoïde | ℃ | 150 |
| MTTFd value according to EN ISO 13849 | Yaers | 150 (for further details see data sheet 08012) |
Hydraulique
| Huile hydraulique | See table on page 6 | ||||||
| Plage de viscosité | -recommended | mm2/s | 20...100 | ||||
| -maximum admissible | mm2/s | 10...800 | |||||
| Plage de température du fluide hydraulique (passage fluide) | ℃ | -20 ...+70 | |||||
| Degré maximal admissible de contamination du fluide hydraulique, classe de propreté selon ISO 4406 (c) | Classe 18/16/131) | ||||||
| Rated flow at Δp = 35 bar per edge 2) | l/min | 4 | 12 | 15 | 24/25 | 40 | |
| Maximum operating pressure |
- Ports A, B, P | bar | 350 | ||||
| -Port T | bar | 250 | |||||
| Limitation of use withregard to the transitionto failsafe(values apply to sum-mated edge) | - Spool symbols C3, C5, C | bar | 350 | 350 | 350 | 350 | 160 |
| -Spool symbols C1, C4 | bar | 350 | 350 | 280 | 250 | 100 | |
| Leakage flow at 100 bar | -Linear characteristic curve L | cm3/min | < 180 | < 300 | - | < 500 | < 900 |
| -Inflected characteristic curve P | cm3/min | < 150 | - | < 180 | < 300 | < 450 | |
static/dynamic
| Hystérésis | % | < 0.1 |
| Plage d'inversion | % | < 0.05 |
| Sensibilité de réponse | % | < 0.05 |
| Manufacturing tolerance qVmax | % | < 10 |
| Dérive de température (plage de température 20℃ ... 80℃) | Zero shift < 0.25 % with Δ∂= 10 K | |
| Pressure drift | % 100 bar | Zero shift < 0.15 |
| Compensation zéro | Ex factory ±1 % |
Les classes de propreté spécifiées pour les composants doivent être respectées dans les systèmes hydrauliques. Une filtration efficace prévient les défauts et augmente en même temps la durée de vie des composants.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limitsx=qνnomcURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limitsx/35)
| Huile hydraulique | Classification | Convient matériaux d'étanchéité |
Normes | |
| Huiles minérales et hydrocarbures connexes | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | NBR, FKM | DIN 51524 | |
| Biodegradable | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | HETG | NBR, FKM | ISO 15380 |
| HEES | FKM | |||
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | HEPG | FKM | ISO 15380 | |
| Résistant au feu | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | FKM | ISO 12922 |
| -contenant de l'eau | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits, cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits |
NBR | ISO 12922 | |
| Informations importantes sur les fluides hydrauliques ! -Il peut y avoir des limitations concernant les données techniques de la vanne (température, plage de pression, durée de vie, intervalles de maintenance, etc.) ! cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits. cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits - If mineral oils and related hydrocarbons are used,data sheet 90220 must be complied with! ▶Bio-degradable: - If bio-degradable hydraulic fluids are used, data sheet 90221 must be complied with! ▶Flame-resistant - water-free: - If flame-resistant, water-free hydraulic fluids are used, datasheet 90222 must be complied with! ▶Flame-resistant - containing water: The maximum pressure differential per control edge is 50 bar. Pressure pre-loading atthe tank port > 20 % of the pressure differential; otherwise,increased cavitation. Life cycle as compared to operation with mineral oil HL, HLP 50 % to 100 %. |
||||
electrical, integrated electronics (OBE)
| Relative duty cycle (%) | 100 (continuous operation) |
| Classe de protection selon EN 60529 | IP 65 avec connecteurs enfichables montés et verrouillés |
| Tension d'alimentation Terminal A: Terminal B: Maximum admissible residual ripple |
24 V= At least 19 V=/maximum 36 V= 0V 2.5 Vpp |
| Maximum power consumption | 40 VA |
| Fuse protection, external | 2.5AT |
| Input, version A1 Terminal D: UE Terminal E: |
Differential amplifier, Ri = 100 kΩ 0...±10V 0V |
| Input, version F1 Terminal D: ID-E Terminal E: ID-E |
Load, Rsh = 200 Ω 4 ... (12) ... 20 mA Current loop ID-E feedback |
| Maximum voltage of the differential inputs against 0 V |
|
| Test signal, version A1 Terminal F: Utest Terminal C: |
LVDT 0...±10V cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits |
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limitscURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limitscURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits |
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits Current loop IcURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits feedback |
| Functional earth and screening | See pin assignment (CE-compliant installation) |
| Adjustment | Calibrated in the factory, see valve characteristic curve |
| Conformité | CE according to EMC Directive 2004/108/EC Tested according to EN 61000-6-2 and EN 61000-6-3 |











