4WREE Proportional Valve with Position Feedback

The 4WREE proportional valve combines direction and flow control with electrical spool-position feedback. The existing data distinguishes 4WRE and 4WREE variants, so electronics, weight and connection details must be selected from the correct variant.

  • Electrical spool-position feedback
  • Spring-centered spool
  • Subplate mounting
  • Sizes 6 and 10 distinguished in the table

PRANCE HYDRAULIC · PRODUCT SERIES

4WREE Proportional Valve with Position Feedback

Proportional directional spool valve with electrical position feedback · Subplate-mounted flow and direction control

The 4WREE proportional valve combines direction and flow control with electrical spool-position feedback. The existing data distinguishes 4WRE and 4WREE variants, so electronics, weight and connection details must be selected from the correct variant.

Modèle

✓4WREE original product photograph
4WREEProportional directional spool valve with electrical position feedback
Demander un devisVoir les données techniques et la fiche technique

Confirm the complete model and approved specification with Prance Hydraulic. Product-series references alone do not establish interchangeability.

Étude de configuration · Documentation technique · Sélection de produits

Détails du produit

  • Electrical spool-position feedback
  • Spring-centered spool
  • Subplate mounting
  • Sizes 6 and 10 distinguished in the table

CATÉGORIES : Distributeur hydraulique, Valvule proportionnelle

4WREE Features & Application

Electrical spool-position feedback

Spool feedback concerns the valve position. Confirm whether the machine also requires separate actuator position or pressure feedback.

Spring-centered spool

Specify the full MS order code, installation drawing and operating duty so the quotation can identify the proposed configuration.

Subplate mounting

Check pilot diameter, bolt pattern, shaft engagement or port pattern against the approved installation drawing.

Sizes 6 and 10 distinguished in the table

Include the series and all order-code suffixes in the enquiry. A common nominal size does not establish compatibility.

4WREE Specifications

Series / model4WREE
Product type4WREE Proportional Valve with Position Feedback
ConceptionProportional directional spool valve with electrical position feedback
Circuit / selectionSubplate-mounted flow and direction control
Published nominal sizes6 and 10
FeedbackElectrical spool position
Mounting patternDIN 24340 form A / ISO 4401 / CETOP reference in the existing description

4WREE Selection & Configuration

The 4WREE proportional valve combines direction and flow control with electrical spool-position feedback. The existing data distinguishes 4WRE and 4WREE variants, so electronics, weight and connection details must be selected from the correct variant.

Confirm the command interface and connector pin assignment before replacing a valve. Spool-position feedback describes the valve control loop; it does not measure actuator position or eliminate the need to review the external machine controller.

4WREE original product view

Your Application.
The Right Configuration.

Hydraulic pumps · Hydraulic motors · Hydraulic valves

Send the MS nameplate, operating requirements and installation drawing for a configuration review before quoting.

  • Model review — send the full model code or an existing nameplate photograph.
  • Interface matching — confirm shaft, mounting flange, rotation and ports.
  • Operating conditions — provide flow, pressure, speed, fluid and duty cycle.
  • Documentation — request the relevant product data and drawings for your review.
Prance workshop with a row of production equipment

4WREE Buying Guide

Use this sequence to prepare the 4WREE configuration for review and quotation.

  1. Select the circuit symbol and required de-energized spool position.
  2. State working flow, pressure and the pressure-drop condition for rated flow.
  3. Review spool overlap and command behavior during startup and switch-off.
  4. Confirm nominal size, subplate pattern, port and seal requirements.
  5. Match supply voltage, command input, connector and pin assignment.
  6. Review pilot supply, drain and feedback where the selected valve uses them.
  7. Approve the exact valve code, circuit drawing, quantity and documentation.
4WREE original product photograph for installation review

Selection, Documentation & Project Support

Prance technical team image from its company website

Selection Support

Learn more →

Share your hydraulic circuit, operating point and installation requirements for a configuration discussion.


Flow · Pressure · Speed · Interfaces
Prance quality standards image from its company website

Technical Resources

Learn more →

Review product documentation, model codes and technical data before finalizing the specification.


Datasheets · Model codes · Drawings
Prance sales team image from its company website

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

Learn more →

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.


cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

Configuration, Quantity & Delivery

Confirm the complete MS code, approved drawing and operating limits. Availability, quantity, documentation and delivery date are confirmed in the quotation.

Discuss Your 4WREE Application

Send the full model code, operating duty, installation details and quantity.

Request a 4WREE Quotation

4WREE Questions Before Ordering

What type of product is the 4WREE?

4WREE Proportional Valve with Position Feedback. Design: Proportional directional spool valve with electrical position feedback. Subplate-mounted flow and direction control. Confirm the complete order code for the offered version.

Can a similar valve replace the 4WREE?

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

Select the circuit symbol and required de-energized spool position. State working flow, pressure and the pressure-drop condition for rated flow. Attach the nameplate, complete order code, installation drawing and required quantity.

4WREE Technical Data & Documents

View 4WREE catalog data and operating conditions

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.

Données techniques (pour des applications en dehors de ces paramètres, veuillez nous consulter)

Général

Tailles Taille 6 10
Poids – Type 4WRE kg 2.2 6.3
– Type 4WREE kg 2.4 6.5
Position d'installation Any, preferably horizontal
Plage de température ambiante – Type 4WRE ℃ -20 to +70
– Type 4WREE ℃ -20 to +50
Storage temperature range ℃ -20 to +80
MTTFd values according to EN ISO 13849 Years 150 1) (for more information see data sheet 08012)

hydraulique (measured with HLP46,θhuile=40℃+5℃ and p= 100 bar)

Maximum operating pressure – Port A,B,P bar 315
– Port T bar 210
Rated flow qV rated with Δp = 10 bar l/min 4,8,16,32 25,50,75
Recommended maximum flow l/min 80 180
Huile hydraulique Voir le tableau ci-dessous
Plage de température de l'huile hydraulique ℃ -20 à +80 (de préférence +40 à +50)
Plage de viscosité mm2/s 20 à 380 (de préférence 30 à 46)
Degré maximal admissible de contamination du fluide hydraulique, classe de propreté selon ISO 4406 (c) Classe 20/18/15 2)
Hystérésis % ≤ 1
Plage d'inversion % ≤ 0.05
Sensibilité de réponse % ≤ 0.05
Zero shift upon change of hydraulic %/10K ≤ 0.15
fluid temperature and operating pressure %/100 bar ≤ 0.1
1)cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits. 2) Les classes de propreté spécifiées pour les composants doivent être respectées dans les systèmes hydrauliques. Une filtration efficace prévient les défauts et augmente en même temps la durée de vie des composants.
Huile hydraulique Classification Suitable sealing materials Normes
Huiles minérales et hydrocarbures connexes HL, HLP NBR, FKM DIN 51524
Résistant au feu -contenant de l'eau HFC (Fuchs HYDROTHERM 46M, Petrofer Ultra Safe 620) NBR ISO 12922
Important information on hydraulic fluids! -For more information and data on the use of other hydraulic fluids refer to data sheet 90220 or contact us! -There may be limitations regarding the technical valve data (temperature, pressure range, service life , maintenance intervals, etc.)! -The flash point of the process and operating medium used must be 40 K higher than the maximum solenoid surface temperature. – Flame-resistant- wate-containingr: Maximum pressure differential per control edge 175 bar. Pressure pre-loading at the tank port > 20% of the pressure differential; otherwise, increased cavitation. Life cycle as compared to operation with mineral oil HL,HLP 50% to 100%

Électrique

Taille Taille 6 6
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits Tension continue
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits – Cold value at 20 ℃ Ω 2.65 4.55
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits Ω 4.05 6.82
Cycle de service % 100
Température maximale de la bobine 1) ℃ up to 150
Electrical connection see page 8 and 9 – Type 4WRE With connector according to DIN EN 175301-803 and ISO 4400
Mating connector according to DIN EN 175301-803 and ISO 4400 2)
– Type 4WREE With connector DIN EN 175201-804
Mating connector DIN EN 175201-804 2) IP65 with mating connector mounted and locked
Classe de protection de la vanne selon EN 60529 IP65 with mating connector mounted and locked

Électronique de contrôle

Type 4WRE 4/3 version Digital VT-VRPD-2-2X/V0/0 according to RE 30126
Amplifier in
euro-card format 2) Analog VT-VRPA2-1-1X/V0 according to data sheet 30119 VT-VRPA2-2-1X/VO according to data sheet 30119
Module amplifier 2) Analog VT-MRPA2-1 according to data sheet 30219 VT-MRPA2-2 according to data sheet 30219
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits 4/2 version Analog cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits VT-MRPA1-2 according to data sheet 30219
Module amplifier 2)
Type 4WREE analog command value module Integrated in the valve, see page 9
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
analog command value module cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
analog command value card cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
digital command value card cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
Tension d'alimentation Nominal voltage VDC 24
lower limit value V 19.4
upper limit value V 35
Consommation électrique Imax A <2
of the amplifier Pulse current A 3
1)Due to the temperatures occurring at the surfaces of the solenoid coils, the European standards ISO 13732-1 and EN ISO 4413 need to be adhered to! 2) Separate order

Notice:

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

Request a 4WREE Quotation

Tell us your required configuration, quantity and application.

Démo du formulaire de contact
4WREE original product photograph

Données techniques (pour des applications en dehors de ces paramètres, veuillez nous consulter)

Général

Tailles Taille 6 10
Poids - Type 4WRE kg 2.2 6.3
- Type 4WREE kg 2.4 6.5
Position d'installation Any, preferably horizontal
Plage de température ambiante - Type 4WRE ℃ -20 to +70
- Type 4WREE ℃ -20 to +50
Storage temperature range ℃ -20 to +80
MTTFd values according to EN ISO 13849 Years 150 1) (for more information see data sheet 08012)

hydraulique (measured with HLP46,θhuile=40℃+5℃ and p= 100 bar)

Maximum operating
pressure
- Port A,B,P bar 315
- Port T bar 210
Rated flow qV rated with Δp = 10 bar l/min 4,8,16,32 25,50,75
Recommended maximum flow l/min 80 180
Huile hydraulique Voir le tableau ci-dessous
Plage de température de l'huile hydraulique ℃ -20 à +80 (de préférence +40 à +50)
Plage de viscosité mm2/s 20 à 380 (de préférence 30 à 46)
Degré maximal admissible de contamination du fluide hydraulique, classe de propreté selon ISO 4406 (c) Classe 20/18/15 2)
Hystérésis % ≤ 1
Plage d'inversion % ≤ 0.05
Sensibilité de réponse % ≤ 0.05
Zero shift upon change of hydraulic %/10K ≤ 0.15
fluid temperature and operating pressure %/100 bar ≤ 0.1

1)cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.

2) Les classes de propreté spécifiées pour les composants doivent être respectées dans les systèmes hydrauliques. Une filtration efficace prévient les défauts et augmente en même temps la durée de vie des composants.

Huile hydraulique Classification Convient
matériaux d'étanchéité
Normes
Huiles minérales et hydrocarbures connexes HL, HLP NBR, FKM DIN 51524
Résistant au feu -contenant de l'eau cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits,
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
NBR ISO 12922
Informations importantes sur les fluides hydrauliques !
-Pour plus d'informations et de données sur l'utilisation d'autres fluides hydrauliques, consultez la fiche technique 90220 ou contactez-nous !
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
-Le point d'éclair du fluide de processus et du milieu de fonctionnement utilisé doit être supérieur de 40 K à la température maximale de la surface du solénoïde.
- Résistant au feu - contenant de l'eau : La différence de pression maximale par arête de contrôle est de 175 bar. Précharge de pression au port du réservoir > 20% de la différence de pression ; sinon, cavitation accrue.
- Cycle de vie par rapport à l'opération avec huile minérale HL,HLP 50% à 100%

Électrique

Taille Taille 6 6
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits Tension continue
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits Ω 2.65 4.55
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits Ω 4.05 6.82
Cycle de service % 100
Température maximale de la bobine 1) ℃ up to 150
Electrical connection
see page 8 and 9
- Type 4WRE With connector according to DIN EN 175301-803 and ISO 4400
Mating connector according to DIN EN 175301-803 and ISO 4400 2)
- Type 4WREE With connector DIN EN 175201-804
Mating connector DIN EN 175201-804 2)
IP65 with mating connector mounted and locked
Classe de protection de la vanne selon EN 60529 IP65 with mating connector mounted and locked

Électronique de contrôle

Type 4WRE 4/3 version Digital VT-VRPD-2-2X/V0/0 according to RE 30126
Amplifier in
euro-card format 2) Analog VT-VRPA2-1-1X/V0
according to data sheet 30119
VT-VRPA2-2-1X/VO according to data sheet 30119
Module amplifier 2) Analog VT-MRPA2-1
according to data sheet 30219
VT-MRPA2-2 according to data sheet 30219
Type 4WRE...A... 4/2 version Analog VT-MRPA1-1
according to data sheet 30219
VT-MRPA1-2 according to data sheet 30219
Module amplifier 2)
Type 4WREE analog command value module Integrated in the valve, see page 9
VT- SWMA-1-1X/...according to data sheet 29902
analog command value module VT-SWMAK-1-1X/... selon la fiche technique 29903
analog command value card VT-SWKA-1-1X/... selon la fiche technique 30255
digital command value card VT-HACD -1-1X/... according to data sheet 30143
Tension d'alimentation Nominal voltage VDC 24
lower limit value V 19.4
upper limit value V 35
Consommation électrique Imax A <2
of the amplifier Pulse current A 3

1)Due to the temperatures occurring at the surfaces of the solenoid coils, the European standards ISO 13732-1 and EN ISO 4413 need to be adhered to!

2) Separate order

Notice:

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.

4WREE