Wenzhou Prance Hydraulic Equipment Co., Ltd
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
The 4WRAE proportional valve controls hydraulic direction and flow by direct actuation. The series table includes both WRA and WRAE versions; the WRAE integrated-electronics data must be used when matching the controller and connector.
- Direct actuation
- Spring-centered control spool
- Integrated electronics for WRAE variant
- Subplate mounting
PRANCE HYDRAULIC · PRODUCT SERIES
Direct-operated proportional directional valve · Subplate-mounted direction and flow control
The 4WRAE proportional valve controls hydraulic direction and flow by direct actuation. The series table includes both WRA and WRAE versions; the WRAE integrated-electronics data must be used when matching the controller and connector.
Modèle

Confirm the complete model and approved specification with Prance Hydraulic. Product-series references alone do not establish interchangeability.
Étude de configuration · Documentation technique · Sélection de produits
Détails du produit
- Direct actuation
- Spring-centered control spool
- Integrated electronics for WRAE variant
- Subplate mounting
CATÉGORIES : Distributeur hydraulique, Valvule proportionnelle
4WRAE Features & Application
Direct actuation
Specify the full MS order code, installation drawing and operating duty so the quotation can identify the proposed configuration.
Spring-centered control spool
Match the complete control option and its command requirements to the existing controller. Similar housings can use different control arrangements.
Integrated electronics for WRAE variant
Match the complete control option and its command requirements to the existing controller. Similar housings can use different control arrangements.
Subplate mounting
Check pilot diameter, bolt pattern, shaft engagement or port pattern against the approved installation drawing.
4WRAE Specifications
| Series / model | 4WRAE |
|---|---|
| Product type | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits |
| Conception | Direct-operated proportional directional valve |
| Circuit / selection | Subplate-mounted direction and flow control |
| Published nominal sizes | 6 and 10 |
| Listed WRAE command variants | A1: ±10 V; F1: 4–20 mA |
| Rated-flow test condition | Δp = 10 bar in the existing technical table |
4WRAE Selection & Configuration
The 4WRAE proportional valve controls hydraulic direction and flow by direct actuation. The series table includes both WRA and WRAE versions; the WRAE integrated-electronics data must be used when matching the controller and connector.
Confirm nominal size, spool characteristic and command input before choosing a rated flow. Rated flow is given at a specified pressure drop and is different from maximum permissible flow. Keep the WRA and WRAE electrical data separate during comparison.

Your Application.
The Right Configuration.
Hydraulic pumps · Hydraulic motors · Hydraulic valves
Send the MS nameplate, operating requirements and installation drawing for a configuration review before quoting.
- Model review — send the full model code or an existing nameplate photograph.
- Interface matching — confirm shaft, mounting flange, rotation and ports.
- Operating conditions — provide flow, pressure, speed, fluid and duty cycle.
- Documentation — request the relevant product data and drawings for your review.

4WRAE Buying Guide
Use this sequence to prepare the 4WRAE configuration for review and quotation.
- Select the circuit symbol and required de-energized spool position.
- State working flow, pressure and the pressure-drop condition for rated flow.
- Review spool overlap and command behavior during startup and switch-off.
- Confirm nominal size, subplate pattern, port and seal requirements.
- Match supply voltage, command input, connector and pin assignment.
- Review pilot supply, drain and feedback where the selected valve uses them.
- Approve the exact valve code, circuit drawing, quantity and documentation.

Selection, Documentation & Project Support

Selection Support
Learn more →Share your hydraulic circuit, operating point and installation requirements for a configuration discussion.
Flow · Pressure · Speed · Interfaces

Technical Resources
Learn more →Review product documentation, model codes and technical data before finalizing the specification.
Datasheets · Model codes · Drawings

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
Learn more →cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
Configuration, Quantity & Delivery
Confirm the complete MS code, approved drawing and operating limits. Availability, quantity, documentation and delivery date are confirmed in the quotation.
Discuss Your 4WRAE Application
Send the full model code, operating duty, installation details and quantity.
Request a 4WRAE Quotation4WRAE Questions Before Ordering
What type of product is the 4WRAE?
4WRAE Direct Operated Proportional Valve. Design: Direct-operated proportional directional valve. Subplate-mounted direction and flow control. Confirm the complete order code for the offered version.
Can a similar valve replace the 4WRAE?
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
Select the circuit symbol and required de-energized spool position. State working flow, pressure and the pressure-drop condition for rated flow. Attach the nameplate, complete order code, installation drawing and required quantity.
4WRAE Technical Data & Documents
View 4WRAE catalog data and operating conditions
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
Données techniques
(pour des applications en dehors de ces paramètres, veuillez nous consulter)Général
| Nominal size | NS | 6 | 10 | |
| Installation | optional, preferably horizontal | |||
| Storage temperature range | ℃ | -20 to +80 | ||
| Ambient | 4WRA | ℃ | -20 to +70 | |
| temperature range | 4WRAE | ℃ | -20 to +50 | |
| Poids | 4WRA | kg | 2.0 | 6.6 |
| 4WRAE | kg | 2.2 | 6.8 | |
| Hydraulic (measured with HLP46,Θhuile= 40 ℃±5 ℃) | ||||
| Max. operating pressure | Ports A, B, P | bar | 315 | |
| Port T | bar | 210 | ||
| Nominal flow qV nom at Δp=10 bar | l/min | 7,15,26 | 30,60 | |
| Max. permissible flow | l/min | 42 (80)1) | 75 (140)1) | |
| Pressure fluid | mineral oil (HL, HLP) to DIN 51524 other pressure fluids on request! | |||
| Pressure fluid temperature range | ℃ | -20 à +80 (de préférence +40 à +50) | ||
| Plage de viscosité | mm2/s | 20 à 380 (de préférence 30 à 46) | ||
| Max. permissible degree of pressure fluid contamination cleanlisness class to ISO 4406 (c) | class 20/18/15 2) | |||
| Hystérésis | % | ≤ 5 | ||
| Reversal error | % | ≤ 1 | ||
| Sensibilité de réponse | % | ≤ 0.5 | ||
Electical
| Nominal size | NS | 6 | 10 | |
| Type de tension | DC | |||
| Command value signa | Voltage input “A1” | V | ±10 | |
| with type WRAE | Current input “F1” | mA | 4 à 20 | |
| Max. current per solenoid | A | 2.5 | ||
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | Cold value at 20 ℃ | Ω | 2 | |
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | Max. warm value | Ω | 3 | |
| Duty | % | 100 | ||
| Max. coil temperature 1) | ℃ | 150 | ||
| Electrical connections see page 7 | 4WRA | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | ||
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits 2) | ||||
| 4WRAE | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | |||
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits 2) | ||||
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | |||
Électronique de contrôle
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | Digital amplifier in Eurocard format 2) | VT-VSPD-1-2X (to RE 30523 – middle of 2006) | |
| Analogue amplifier in Eurocard format 2) | VT-VSPA2-1-2X/… to RE 30110 | ||
| Analogue module amplifier 2) | VT-MSPA2-1-1X to RE 30228 | ||
| For 4WRAE | Analogue command value module | integrated into the valves, see page 8 | |
| VT- SWMA-1-1X/… to RE 29902 | |||
| Analogue command value module | VT-SWMKA-1-1X/… to RE 29903 | ||
| Carte de commande numérique | VT-HACD-1-1X/… to RE 30143 | ||
| Analogue command value card | VT-SWKA-1-1X/… to RE 30255 | ||
| Supply voltage 4WRAE, 4WRA 3) | Nominal voltage | VDC | 24 |
| Lower limiting value | V | 21 / 22 (4WRA); 19 (4WRAE) | |
| Upper limiting value | V | 35 | |
| Amplifier current | lmax | A | 1.8 |
| consumption | Max. impulse current | A | 3 |
Note:
For details regarding the environmental simulation test covering EMC (electromagnetic compatibility), climate and mechanical loading see RE 29055-U(declaration regarding environmental compatibility).Watch 4WRAE Product Video
Related Selection Resources
Request a 4WRAE Quotation
Tell us your required configuration, quantity and application.
Données techniques
(pour des applications en dehors de ces paramètres, veuillez nous consulter)
Général
| Nominal size | NS | 6 | 10 | |
| Installation | optional, preferably horizontal | |||
| Storage temperature range | ℃ | -20 to +80 | ||
| Ambient | 4WRA | ℃ | -20 to +70 | |
| temperature range | 4WRAE | ℃ | -20 to +50 | |
| Poids | 4WRA | kg | 2.0 | 6.6 |
| 4WRAE | kg | 2.2 | 6.8 | |
| Hydraulic (measured with HLP46,Θhuile= 40 ℃±5 ℃) | ||||
| Max. operating pressure | Ports A, B, P | bar | 315 | |
| Port T | bar | 210 | ||
| Nominal flow qV nom at Δp=10 bar | l/min | 7,15,26 | 30,60 | |
| Max. permissible flow | l/min | 42 (80)1) | 75 (140)1) | |
| Pressure fluid | mineral oil (HL, HLP) to DIN 51524 other pressure fluids on request! |
|||
| Pressure fluid temperature range | ℃ | -20 à +80 (de préférence +40 à +50) | ||
| Plage de viscosité | mm2/s | 20 à 380 (de préférence 30 à 46) | ||
| Max. permissible degree of pressure fluid contamination cleanlisness class to ISO 4406 (c) | class 20/18/15 2) | |||
| Hystérésis | % | ≤ 5 | ||
| Reversal error | % | ≤ 1 | ||
| Sensibilité de réponse | % | ≤ 0.5 | ||
1)permissible flow with a dual flow path
2)The cleanliness class stated for the components must be adhered too in hydraulic systems. Effective filtration prevents faults from occurring and at the same time increases the component service life.For the selection of filters see catalogue sheets RE 50070,RE 50076, RE 50081, RE 50086 and RE 50088
Electical
| Nominal size | NS | 6 | 10 | |
| Type de tension | DC | |||
| Command value signa | Voltage input "A1" | V | ±10 | |
| with type WRAE | Current input "F1" | mA | 4 à 20 | |
| Max. current per solenoid | A | 2.5 | ||
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | Cold value at 20 ℃ | Ω | 2 | |
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | Max. warm value | Ω | 3 | |
| Duty | % | 100 | ||
| Max. coil temperature 1) | ℃ | 150 | ||
| Electrical connections see page 7 |
4WRA | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | ||
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits 2) | ||||
| 4WRAE | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | |||
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits 2) | ||||
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | |||
Électronique de contrôle
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | Digital amplifier in Eurocard format 2) | VT-VSPD-1-2X (to RE 30523 - middle of 2006) | |
| Analogue amplifier in Eurocard format 2) | VT-VSPA2-1-2X/... to RE 30110 | ||
| Analogue module amplifier 2) | VT-MSPA2-1-1X to RE 30228 | ||
| For 4WRAE | Analogue command value module | integrated into the valves, see page 8 | |
| VT- SWMA-1-1X/... to RE 29902 | |||
| Analogue command value module | VT-SWMKA-1-1X/... to RE 29903 | ||
| Carte de commande numérique | VT-HACD-1-1X/... to RE 30143 | ||
| Analogue command value card | VT-SWKA-1-1X/... to RE 30255 | ||
| Tension d'alimentation 4WRAE, 4WRA 3) |
Nominal voltage | VDC | 24 |
| Lower limiting value | V | 21 / 22 (4WRA); 19 (4WRAE) |
|
| Upper limiting value | V | 35 | |
| Amplifier current | lmax | A | 1.8 |
| consumption | Max. impulse current | A | 3 |
1) Due to the occurring surface temperature of the solenoid coils, the European Standards DIN EN 563 and DIN EN 982must be taken into account!
2) Commande séparée
3) With Bosch Rexroth AG control electronics
Note:
For details regarding the environmental simulation test covering EMC (electromagnetic compatibility), climate and mechanical loading see RE 29055-U(declaration regarding environmental compatibility).







