4WREE Proportional Valve with Position Feedback

The 4WREE proportional valve combines direction and flow control with electrical spool-position feedback. The existing data distinguishes 4WRE and 4WREE variants, so electronics, weight and connection details must be selected from the correct variant.

  • Electrical spool-position feedback
  • Spring-centered spool
  • Subplate mounting
  • Sizes 6 and 10 distinguished in the table
HOME › Hydraulikventile › 4WREE

PRANCE HYDRAULIC · PRODUCT SERIES

4WREE Proportional Valve with Position Feedback

Proportional directional spool valve with electrical position feedback · Subplate-mounted flow and direction control

The 4WREE proportional valve combines direction and flow control with electrical spool-position feedback. The existing data distinguishes 4WRE and 4WREE variants, so electronics, weight and connection details must be selected from the correct variant.

Model

✓4WREE original product photograph
4WREEProportional directional spool valve with electrical position feedback
Request a QuotationTechnische Daten & Datenblatt anzeigen

Confirm the complete model and approved specification with Prance Hydraulic. Product-series references alone do not establish interchangeability.

Configuration review · Technical documentation · Product selection

Produktdetails

  • Electrical spool-position feedback
  • Spring-centered spool
  • Subplate mounting
  • Sizes 6 and 10 distinguished in the table

CATEGORIES: Hydraulikventil, Proportionalventil

4WREE Features & Application

Electrical spool-position feedback

Spool feedback concerns the valve position. Confirm whether the machine also requires separate actuator position or pressure feedback.

Spring-centered spool

Specify the full MS order code, installation drawing and operating duty so the quotation can identify the proposed configuration.

Subplate mounting

Check pilot diameter, bolt pattern, shaft engagement or port pattern against the approved installation drawing.

Sizes 6 and 10 distinguished in the table

Include the series and all order-code suffixes in the enquiry. A common nominal size does not establish compatibility.

4WREE Specifications

Series / model4WREE
Product type4WREE Proportional Valve with Position Feedback
DesignProportional directional spool valve with electrical position feedback
Circuit / selectionSubplate-mounted flow and direction control
Published nominal sizes6 and 10
FeedbackElectrical spool position
Mounting patternDIN 24340 form A / ISO 4401 / CETOP reference in the existing description

4WREE Selection & Configuration

The 4WREE proportional valve combines direction and flow control with electrical spool-position feedback. The existing data distinguishes 4WRE and 4WREE variants, so electronics, weight and connection details must be selected from the correct variant.

Confirm the command interface and connector pin assignment before replacing a valve. Spool-position feedback describes the valve control loop; it does not measure actuator position or eliminate the need to review the external machine controller.

4WREE original product view

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.

Hydraulic pumps · Hydraulic motors · Hydraulic valves

Send the MS nameplate, operating requirements and installation drawing for a configuration review before quoting.

  • Model review — send the full model code or an existing nameplate photograph.
  • Interface matching — confirm shaft, mounting flange, rotation and ports.
  • Operating conditions — provide flow, pressure, speed, fluid and duty cycle.
  • Documentation — request the relevant product data and drawings for your review.
Prance workshop with a row of production equipment

4WREE Buying Guide

Use this sequence to prepare the 4WREE configuration for review and quotation.

  1. Select the circuit symbol and required de-energized spool position.
  2. State working flow, pressure and the pressure-drop condition for rated flow.
  3. Review spool overlap and command behavior during startup and switch-off.
  4. Confirm nominal size, subplate pattern, port and seal requirements.
  5. Match supply voltage, command input, connector and pin assignment.
  6. Review pilot supply, drain and feedback where the selected valve uses them.
  7. Approve the exact valve code, circuit drawing, quantity and documentation.
4WREE original product photograph for installation review

Selection, Documentation & Project Support

Prance technical team image from its company website

Selection Support

Learn more →

Share your hydraulic circuit, operating point and installation requirements for a configuration discussion.


Flow · Pressure · Speed · Interfaces
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

Technical Resources

Learn more →

Review product documentation, model codes and technical data before finalizing the specification.


Datasheets · Model codes · Drawings
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

Project Inquiries

Learn more →

Send your required model, quantity, application and project requirements to discuss your inquiry.


Product inquiries · Configuration review

Configuration, Quantity & Delivery

Confirm the complete MS code, approved drawing and operating limits. Availability, quantity, documentation and delivery date are confirmed in the quotation.

Discuss Your 4WREE Application

Send the full model code, operating duty, installation details and quantity.

Request a 4WREE Quotation

4WREE Questions Before Ordering

What type of product is the 4WREE?

4WREE Proportional Valve with Position Feedback. Design: Proportional directional spool valve with electrical position feedback. Subplate-mounted flow and direction control. Confirm the complete order code for the offered version.

Can a similar valve replace the 4WREE?

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

Select the circuit symbol and required de-energized spool position. State working flow, pressure and the pressure-drop condition for rated flow. Attach the nameplate, complete order code, installation drawing and required quantity.

4WREE Technical Data & Documents

View 4WREE catalog data and operating conditions

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.

Technische Daten (Für Anwendungen außerhalb dieser Parameter sprechen Sie uns bitte an!)

Allgemein

Größen Größe 6 10
Gewicht – Type 4WRE kg 2.2 6.3
– Type 4WREE kg 2.4 6.5
Einbaulage Beliebig, vorzugsweise horizontal
Umgebungstemperaturbereich – Type 4WRE ℃ -20 bis +70
– Type 4WREE ℃ -20 bis +50
Lagertemperaturbereich ℃ -20 bis +80
MTTFd Werte nach EN ISO 13849 Jahre 150 1) (für weitere Informationen siehe Datenblatt 08012)

hydraulisch (gemessen mit HLP46, θÖl= 40 °C + 5 °C und p = 100 bar)

Maximum operating pressure – Port A,B,P Bar 315
– Port T Bar 210
NennvolumenstromV-limitiert mit Δp = 10 bar l/min 4,8,16,32 25,50,75
Empfohlener maximaler Durchfluss l/min 80 180
Hydraulikflüssigkeit Siehe Tabelle unten
Temperaturbereich der Hydraulikflüssigkeit ℃ -20 bis +80 (vorzugsweise +40 bis +50)
Viskositätsbereich mm2/s 20 bis 380 (vorzugsweise 30 bis 46)
Maximal zulässiger Verschmutzungsgrad der Hydraulikflüssigkeit, Reinheitsklasse nach ISO 4406 (c) Klasse 20/18/15 2)
Hysterese % ≤ 1
Inversionsbereich % ≤ 0,05
Antwortsensitivität % ≤ 0,05
Nullpunktverschiebung bei Hydraulikwechsel %/10K ≤ 0,15
Medientemperatur und Betriebsdruck %/100 bar ≤ 0,1
1)Bei den Steuerschieberarten E, E1, EA, W, W1, WA ist in Richtung der Schieberlängsachse eine ausreichende positive Überdeckung ohne Stoß-/Vibrationsbelastung vorhanden; die Einbaulage im Hinblick auf die Hauptbeschleunigungsrichtung ist zu beachten. 2) Bei Hydrauliksystemen müssen die für die Komponenten vorgeschriebenen Sauberkeitsklassen eingehalten werden. Eine effektive Filtration verhindert Störungen und erhöht gleichzeitig die Lebensdauer der Komponenten.
Hydraulikflüssigkeit Klassifikation Suitable sealing materials Standards
Mineralöle und verwandte Kohlenwasserstoffe HL, HLP NBR, FKM DIN 51524
flammhemmend wasserhaltig HFC (Fuchs HYDROTHERM 46M, Petrofer Ultra Safe 620) NBR ISO 12922
Important information on hydraulic fluids! -For more information and data on the use of other hydraulic fluids refer to data sheet 90220 or contact us! -There may be limitations regarding the technical valve data (temperature, pressure range, service life , maintenance intervals, etc.)! -The flash point of the process and operating medium used must be 40 K higher than the maximum solenoid surface temperature. – Flame-resistant- wate-containingr: Maximum pressure differential per control edge 175 bar. Pressure pre-loading at the tank port > 20% of the pressure differential; otherwise, increased cavitation. Life cycle as compared to operation with mineral oil HL,HLP 50% to 100%

Elektrisch

Größe Größe 6 6
Spannungsart Gleichspannung
Magnetspule – Cold value at 20 ℃ Ω 2.65 4.55
Widerstand Maximaler Heißwert Ω 4.05 6.82
Einschaltdauer % 100
Maximale Spulentemperatur 1) ℃ bis zu 150
Electrical connection see page 8 and 9 – Type 4WRE Mit Steckverbindung nach DIN EN 175301-803 und ISO 4400
Gegenstecker nach DIN EN 175301-803 und ISO 4400 2)
– Type 4WREE Mit Steckverbinder DIN EN 175201-804
Gegenstecker DIN EN 175201-804 2) IP65 mit montiertem und verriegeltem Gegenstecker
Schutzart des Ventils nach EN 60529 IP65 mit montiertem und verriegeltem Gegenstecker

Steuerelektronik

Typ 4WRE 4/3-Version Digital VT-VRPD-2-2X/V0/0 nach RE 30126
Verstärker ein
Eurocard-Format 2) Analog VT-VRPA2-1-1X/V0 according to data sheet 30119 VT-VRPA2-2-1X/VO gemäß Datenblatt 30119
Verstärkermodul 2) Analog VT-MRPA2-1 according to data sheet 30219 VT-MRPA2-2 gemäß Datenblatt 30219
Type 4WRE…A… 4/2-Version Analog cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits VT-MRPA1-2 gemäß Datenblatt 30219
Verstärkermodul 2)
Typ 4WREE Analogwert-Befehlsmodul Im Ventil integriert, siehe Seite 9
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
Analogwert-Befehlsmodul cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
analoge Sollwertkarte cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
digitale Sollwertkarte cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
Versorgungsspannung Nennspannung VDC 24
unterer Grenzwert V 19.4
Obergrenzwert V 35
Stromverbrauch IMax A <2
des Verstärkers Pulsstrom A 3
1)Aufgrund der an den Oberflächen der Magnetspulen auftretenden Temperaturen müssen die europäischen Normen ISO 13732-1 und EN ISO 4413 eingehalten werden! 2) Separate order -> Getrennte Bestellung

Hinweis:

Informationen zur Umweltsimulationsprüfung für die Bereiche EMV (elektromagnetische Verträglichkeit), Klima und mechanische Belastung finden Sie im Datenblatt 29061-U (Erklärung zur Umweltverträglichkeit).
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

Request a 4WREE Quotation

Tell us your required configuration, quantity and application.

Kontaktformular-Demo
4WREE original product photograph

Technische Daten (Für Anwendungen außerhalb dieser Parameter sprechen Sie uns bitte an!)

Allgemein

Größen Größe 6 10
Gewicht - Typ 4WRE kg 2.2 6.3
- Typ 4WREE kg 2.4 6.5
Einbaulage Beliebig, vorzugsweise horizontal
Umgebungstemperaturbereich - Typ 4WRE ℃ -20 bis +70
- Typ 4WREE ℃ -20 bis +50
Lagertemperaturbereich ℃ -20 bis +80
MTTFd Werte nach EN ISO 13849 Jahre 150 1) (für weitere Informationen siehe Datenblatt 08012)

hydraulisch (gemessen mit HLP46, θÖl= 40 °C + 5 °C und p = 100 bar)

Maximaler Betrieb
Druck
- Port A, B, P Bar 315
- Port T Bar 210
NennvolumenstromV-limitiert mit Δp = 10 bar l/min 4,8,16,32 25,50,75
Empfohlener maximaler Durchfluss l/min 80 180
Hydraulikflüssigkeit Siehe Tabelle unten
Temperaturbereich der Hydraulikflüssigkeit ℃ -20 bis +80 (vorzugsweise +40 bis +50)
Viskositätsbereich mm2/s 20 bis 380 (vorzugsweise 30 bis 46)
Maximal zulässiger Verschmutzungsgrad der Hydraulikflüssigkeit, Reinheitsklasse nach ISO 4406 (c) Klasse 20/18/15 2)
Hysterese % ≤ 1
Inversionsbereich % ≤ 0,05
Antwortsensitivität % ≤ 0,05
Nullpunktverschiebung bei Hydraulikwechsel %/10K ≤ 0,15
Medientemperatur und Betriebsdruck %/100 bar ≤ 0,1

1)Bei den Steuerschieberarten E, E1, EA, W, W1, WA ist in Richtung der Schieberlängsachse eine ausreichende positive Überdeckung ohne Stoß-/Vibrationsbelastung vorhanden; die Einbaulage im Hinblick auf die Hauptbeschleunigungsrichtung ist zu beachten.

2) Bei Hydrauliksystemen müssen die für die Komponenten vorgeschriebenen Sauberkeitsklassen eingehalten werden. Eine effektive Filtration verhindert Störungen und erhöht gleichzeitig die Lebensdauer der Komponenten.

Hydraulikflüssigkeit Klassifikation Geeignet
Dichtungsmaterialien
Standards
Mineralöle und verwandte Kohlenwasserstoffe HL, HLP NBR, FKM DIN 51524
flammhemmend wasserhaltig HFC (Fuchs HYDROTHERM 46M),
Petrofer Ultra Safe 620
NBR ISO 12922
Wichtige Informationen zu Hydraulikflüssigkeiten!
-Für weitere Informationen und Daten zur Verwendung anderer Hydraulikflüssigkeiten siehe Datenblatt 90220 oder kontaktieren Sie uns!
-Es kann Einschränkungen hinsichtlich der technischen Ventil날daten (Temperatur, Druckbereich, Lebensdauer, Wartungsintervalle usw.) geben!
Der Flammpunkt des verwendeten Prozess- und Betriebsmediums muss 40 K höher sein als die maximale Magnetoberflächentemperatur.
- Flammhemmend – wasserhaltig: Maximaler Differenzdruck pro Steuerkante 175 bar. Druckvorbelastung am Tankanschluss > 20% des Differenzdrucks; andernfalls erhöhte Kavitation.
Lebensdauer im Vergleich zum Betrieb mit Mineralöl HL, HLP 50% bis 100%

Elektrisch

Größe Größe 6 6
Spannungsart Gleichspannung
Magnetspule - Kaltwert bei 20 ℃ Ω 2.65 4.55
Widerstand Maximaler Heißwert Ω 4.05 6.82
Einschaltdauer % 100
Maximale Spulentemperatur 1) ℃ bis zu 150
Elektrischer Anschluss
siehe Seite 8 und 9
- Typ 4WRE Mit Steckverbindung nach DIN EN 175301-803 und ISO 4400
Gegenstecker nach DIN EN 175301-803 und ISO 4400 2)
- Typ 4WREE Mit Steckverbinder DIN EN 175201-804
Gegenstecker DIN EN 175201-804 2)
IP65 mit montiertem und verriegeltem Gegenstecker
Schutzart des Ventils nach EN 60529 IP65 mit montiertem und verriegeltem Gegenstecker

Steuerelektronik

Typ 4WRE 4/3-Version Digital VT-VRPD-2-2X/V0/0 nach RE 30126
Verstärker ein
Eurocard-Format 2) Analog VT-VRPA2-1-1X/V0
laut Datenblatt 30119
VT-VRPA2-2-1X/VO gemäß Datenblatt 30119
Verstärkermodul 2) Analog VT-MRPA2-1
laut Datenblatt 30219
VT-MRPA2-2 gemäß Datenblatt 30219
Typ 4WRE...A... 4/2-Version Analog VT-MRPA1-1
laut Datenblatt 30219
VT-MRPA1-2 gemäß Datenblatt 30219
Verstärkermodul 2)
Typ 4WREE Analogwert-Befehlsmodul Im Ventil integriert, siehe Seite 9
VT-SWMA-1-1X/...gemäß Datenblatt 29902
Analogwert-Befehlsmodul VT-SWMAK-1-1X/... gemäß Datenblatt 29903
analoge Sollwertkarte VT-SWKA-1-1X/... gemäß Datenblatt 30255
digitale Sollwertkarte VT-HACD -1-1X/... gemäß Datenblatt 30143
Versorgungsspannung Nennspannung VDC 24
unterer Grenzwert V 19.4
Obergrenzwert V 35
Stromverbrauch IMax A <2
des Verstärkers Pulsstrom A 3

1)Aufgrund der an den Oberflächen der Magnetspulen auftretenden Temperaturen müssen die europäischen Normen ISO 13732-1 und EN ISO 4413 eingehalten werden!

2) Separate order -> Getrennte Bestellung

Hinweis:

Informationen zur Umweltsimulationsprüfung für die Bereiche EMV (elektromagnetische Verträglichkeit), Klima und mechanische Belastung finden Sie im Datenblatt 29061-U (Erklärung zur Umweltverträglichkeit).

4WREE