Wenzhou Prance Hydraulic Equipment Co., Ltd
Bomba de deslocamento fixo de pistões axiais da série A2FO
1. Bomba de cilindrada fixa A2FO de pistões axiais, design de eixo bentilhado/inclinado, adequada para acionamentos hidrostáticos em circuitos abertos.
2. Utilização em aplicações móveis e industriais
o fluxo de saída é proporcional à velocidade de acionamento e ao deslocamento
Os rolamentos do veio de transmissão são concebidos para proporcionar a vida útil esperada nestas áreas de funcionamento
5. Elevada densidade de potência
REFERÊNCIA DO MODELO PADRÃO BOSCH REXROTH
Fixed displacement, bent-axis pump for open-circuit hydrostatic drives
Bomba de pistão axial de deslocamento fixo com design de eixo inclinado para sistemas móveis e industriais de circuito aberto. Envie o código completo do modelo e os requisitos de operação para revisão da configuração.
Model

A Prance Hydraulic é um fornecedor independente. Os nomes e referências de modelos da Bosch Rexroth são utilizados apenas para identificação e não implicam filiação ou autorização.
Configuration review · Technical documentation · Product selection
Detalhes do Produto
- Fixed displacement axial piston pump with bent-axis design
- Suitable for hydrostatic drives in open circuits
- Use in mobile and industrial applications
- Output flow proportional to drive speed and displacement
- Drive shaft bearings designed for these areas of operation
- Compact construction with high power density
CATEGORIES: Bomba de pistão, Bomba de deslocamento fixo
Principais Características & Uso Típico
Open-circuit operation
A fixed displacement pump for hydrostatic drives in open circuits. Match the inlet conditions and circuit arrangement to the approved technical data.
Bent-axis construction
The axial piston, bent-axis design offers a compact pump layout with high power density for mobile and industrial hydraulic installations.
Speed-dependent flow
For a fixed displacement, output flow varies with drive speed and volumetric efficiency. Confirm your required flow at the intended operating speed.
Configuration matching
Choose the shaft, mounting flange, rotation, seals and service-line ports for the installation. Nominal size alone does not establish compatibility.
Specifications
| Séries | A2FO |
|---|---|
| Product Type | Axial piston fixed displacement pump |
| Design | Bent axis |
| Circuito | Open circuit |
| Aplicações | Mobile and industrial hydraulic drives |
| Nominal Sizes Listed | 10, 12, 16, 23, 28, 32, 45, 56, 63, 80, 90, 107, 125, 160, 180 |
| Listed Displacement Range | 10.3–180 mL/rev |
| Rotação | Clockwise or counterclockwise; confirm selected model code |
| Focas | NBR or FKM options listed; confirm configuration and fluid compatibility |
| Montagem, Eixo & Portas | Confirm availability for the selected nominal size in the datasheet |
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits |
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.

Suporte a Produto Hidráulico & Configuração
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
Hydraulic pumps · Hydraulic motors · Hydraulic valves
Envie a placa de identificação existente, requisitos do circuito e desenho de instalação para que a Prance possa revisar a configuração A2FO proposta antes de orçar.
- Model review — send the full model code or an existing nameplate photograph.
- Interface matching — confirm shaft, mounting flange, rotation and ports.
- Operating conditions — provide flow, pressure, speed, fluid and duty cycle.
- Documentation — request the relevant product data and drawings for your review.

Buying Guide
Before ordering an A2FO pump, confirm the operating point and mechanical interface. For a replacement, a full model code and clear photographs help establish the starting configuration.
- Confirm the required displacement or flow at operating speed.
- Specify continuous and peak system pressure and duty cycle.
- Review the open-circuit layout and inlet conditions.
- Confirm direction of rotation viewed from the shaft end.
- Match the shaft, mounting flange and service-line ports.
- Specify the fluid, seals, filtration and temperature requirements.
- Review the proposed model, documentation and quantity before ordering.

How We Support Your Business

Selection Support
Learn more →Share your hydraulic circuit, operating point and installation requirements for a configuration discussion.
Flow · Pressure · Speed · Interfaces

Technical Resources
Learn more →Review product documentation, model codes and technical data before finalizing the specification.
Datasheets · Model codes · Drawings

Project Inquiries
Learn more →Send your required model, quantity, application and project requirements to discuss your inquiry.
Product inquiries · Configuration review
Configuração, quantidade e entrega
Compatibilidade: verifique o deslocamento, rotação, eixo, flange, portas, selos e limites de operação em relação ao desenho aprovado. A intercambiabilidade não é assumida apenas pelo nome do modelo.
Quantidade mínima de encomenda (MOQ) e prazo de entrega: disponibilidade, quantidade mínima de encomenda e data de entrega dependem da configuração e quantidade confirmadas. Solicite confirmação por escrito junto com o seu orçamento.
Looking for the Right A2FO Pump for Your Application?
Send your model code, required flow and pressure, installation details and quantity.
Start a product discussion with the Prance team.
Perguntas Frequentes
Is the A2FO a fixed displacement pump?
Yes. The A2FO is a fixed displacement axial piston pump with a bent-axis design. Its displacement is not adjusted by a variable displacement control.
Which hydraulic circuit is it intended for?
The current Prance product page specifies open-circuit hydrostatic drives in mobile and industrial applications. Confirm inlet conditions, duty cycle and operating limits before selection.
How do I select the correct A2FO size?
Start with required flow, operating speed, continuous and peak pressure. Then confirm rotation, shaft, mounting flange, ports, fluid and seals against the approved datasheet.
What should I send for a replacement pump inquiry?
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
Ver todas as 15 tamanhos — deslocamento, velocidade, fluxo, potência, torque e massa
| Dimensão nominal | Deslocamento cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits rpm | Limite de velocidade² rpm | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits L/min | Potência a 35 MPa kW | Potência a 40 MPa kW | Binário a 35 MPa N·m | Binário a 40 MPa N·m | Capacidade de enchimento L | Massa aproximada kg |
|---|---|---|---|---|---|---|---|---|---|---|
| 10 | 10.3 | 3150 | 6000 | 32.4 | 18.9 | 21.6 | 57 | 65 | 0.17 | 6 |
| 12 | 12 | 3150 | 6000 | 37.8 | 22 | 25 | 67 | 76 | 0.17 | 6 |
| 16 | 16 | 3150 | 6000 | 50 | 29.2 | 34 | 88 | 101 | 0.17 | 6 |
| 23 | 22.9 | 2500 | 4750 | 57 | 33 | 38 | 126 | 145 | 0.2 | 9.5 |
| 28 | 28.1 | 2500 | 4750 | 70 | 41 | 47 | 156 | 178 | 0.2 | 9.5 |
| 32 | 32 | 2500 | 4750 | 80 | 47 | 53 | 178 | 203 | 0.2 | 9.5 |
| 45 | 45.6 | 2240 | 4250 | 102 | 59.5 | 68 | 254 | 290 | 0.33 | 13.5 |
| 56 | 56.1 | 2000 | 3750 | 112 | 65 | 75 | 312 | 356 | 0.45 | 18 |
| 63 | 63 | 2000 | 3750 | 126 | 73.5 | 84 | 350 | 400 | 0.45 | 18 |
| 80 | 80.4 | 1800 | 3350 | 144 | 84 | 96 | 445 | 511 | 0.55 | 23 |
| 90 | 90 | 1800 | 3350 | 162 | 95 | 108 | 501 | 572 | 0.55 | 23 |
| 107 | 106.7 | 1600 | 3000 | 170 | 100 | 114 | 594 | 678 | 0.8 | 32 |
| 125 | 125 | 1600 | 3000 | 200 | 117 | 133 | 696 | 795 | 0.8 | 32 |
| 160 | 160.4 | 1450 | 2650 | 232 | 135 | 155 | 893 | 1020 | 1.1 | 45 |
| 180 | 180 | 1450 | 2650 | 261 | 152 | 174 | 1003 | 1145 | 1.1 | 45 |
Valores teóricos arredondados transcritos a partir dos dados técnicos existentes do Prance A2FO; eficiências e tolerâncias não estão incluídas. ¹ As velocidades listadas aplicam-se a uma pressão absoluta de 0,1 MPa na entrada S com óleo mineral de densidade 0,88 kg/L. ² Limites de velocidade mais elevados requerem as condições de entrada especificadas. Não considere uma coluna da tabela como aprovação para operação contínua: confirme a pressão, velocidade, ciclo de trabalho e limites de fluido para a configuração oferecida.
Código do modelo, opções de eixo e disponibilidade de portos
| A2F | ○ | 80 | /6 | 1 | R | -P | A | B | 0.5 |
| Unidade de pistões axiais | Modo de funcionamento | Tamanho (mL/rev) | Séries | Índice | Sentido de rotação | Focas | Extremidade do veio | Flange de fixação | Portas da linha de serviço |
| A2F: Design de eixo inclinado, deslocamento fixo | ○: Bomba, circuitos abertos | 10 12 16 | 6 | 1 | (Visto a partir da extremidade do eixo) | P: NBR (borracha de nitrilo) | Ver abaixo | B: ISO 3019-2 de 4 orifícios | Ver abaixo |
| 23 28 32 | |||||||||
| 45 | R: Sentido horário | ||||||||
| 56 63 | V: FKM (fluoroelastômero) | ||||||||
| 80 90 | L: Sentido anti-horário | ||||||||
| 107 125 | |||||||||
| 160 180 |
Extremidade do veio
| Tamanho | 10 | 12 | 16 | 23 | 28 | 32 | 45 | 56 | 63 | 80 | 90 | 107 | 125 | 160 | 180 | |
| Veículo estriado DIN 5480 | A | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | / | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| Z | ✓ | ✓ | / | ✓ | ✓ | / | ✓ | ✓ | / | ✓ | / | ✓ | / | ✓ | / | |
| Veio com chaveta paralela, DIN 6885 | B | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | / | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| P | ✓ | ✓ | / | ✓ | ✓ | / | ✓ | ✓ | / | ✓ | / | ✓ | / | ✓ | / | |
Porto de linha de serviço1)
| Tamanho | 10 | 12 | 16 | 23 | 28 | 32 | 45 | 56 | 63 | 80 | 90 | 107 | 125 | 160 | 180 |
| 05: Portas de flange SAE A e B, no lado e porta de flange SAE S, traseira | / | / | / | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| 06: Portas roscadas A e B, no lado e porta de flange SAE S, traseira | ✓ | ✓ | ✓ | / | / | / | / | / | / | / | / | / | / | / | / |
Utilize estas matrizes como referência de configuração. Confirme o código completo oferecido, desenho e interfaces antes de fazer o pedido; um nome de série correspondente não estabelece intercambialidade.
Fórmulas de dimensionamento e unidades
| Quantidade | Fórmula | Unidades e uso |
|---|---|---|
| Fluxo entregue | q = Vg × n × ηv / 1000 | q em L/min; Vg em mL/rev; n em rpm |
| Torque de eixo necessário | T = Vg × Δp / (2π × ηmh) | T em N·m; Δp em MPa |
| Potência de eixo necessária | P = q × Δp / (60 × ηt) | P em kW; q em L/min; Δp em MPa |
ηv é eficiência volumétrica; ηmh é eficiência mecânico-hidráulica; ηt = ηv × ηmh. Para valores teóricos, defina as eficiências como 1. A unidade de pressão aqui é MPa: não utilize denominadores baseados em bar 20π e 600 com entradas em MPa. A seleção final também requer verificação das condições de entrada, temperatura, interfaces e ciclo de trabalho.
Watch A2FO Product Video
Related Selection Resources
Request an A2FO Quotation
Tell us your required configuration, quantity and application.







