Wenzhou Prance Hydraulic Equipment Co., Ltd.
Bomba de desplazamiento fijo de pistones axiales serie A2FO
1. Bomba de desplazamiento fijo A2FO de pistones axiales, diseño de eje encorvado, adecuada para transmisiones hidrostáticas en circuitos abiertos.
2. Uso en aplicaciones móviles e industriales
el flujo de salida es proporcional a la velocidad de accionamiento y al desplazamiento
4. Los cojinetes del eje de transmisión están diseñados para ofrecer la vida útil esperada en estas áreas de operación.
5. Alta densidad de potencia
Bomba de desplazamiento fijo de pistones axiales serie A2FO
Fixed displacement, bent-axis pump for open-circuit hydrostatic drives
The A2FO series combines an axial piston, bent-axis design with fixed displacement for mobile and industrial hydraulic applications. Output flow is proportional to drive speed and displacement, with the final configuration selected to match your hydraulic system.
Model
✓
Request a QuotationA2FO Series Axial Piston PumpFixed displacement · Bent-axis design · Open circuit
Configuration review · Technical documentation · Product selection
◉Fixed Displacement
⟲Circuito abierto
▦Mobile & Industrial
Detalles del producto
- Fixed displacement axial piston pump with bent-axis design
- Suitable for hydrostatic drives in open circuits
- Use in mobile and industrial applications
- Output flow proportional to drive speed and displacement
- Drive shaft bearings designed for these areas of operation
- Compact construction with high power density
CATEGORIES: Bomba de pistón, Bomba de desplazamiento fijo
Descripción
Key Features & Typical Use
Open-circuit operation
A fixed displacement pump for hydrostatic drives in open circuits. Match the inlet conditions and circuit arrangement to the approved technical data.
Bent-axis construction
The axial piston, bent-axis design offers a compact pump layout with high power density for mobile and industrial hydraulic installations.
Speed-dependent flow
For a fixed displacement, output flow varies with drive speed and volumetric efficiency. Confirm your required flow at the intended operating speed.
Configuration matching
Choose the shaft, mounting flange, rotation, seals and service-line ports for the installation. Nominal size alone does not establish compatibility.
Specifications
| Series | A2FO |
|---|---|
| Product Type | Axial piston fixed displacement pump |
| Diseño | Bent axis |
| Circuito | Open circuit |
| Aplicaciones | Mobile and industrial hydraulic drives |
| Nominal Sizes Listed | 10, 12, 16, 23, 28, 32, 45, 56, 63, 80, 90, 107, 125, 160, 180 |
| Listed Displacement Range | 10.3–180 mL/rev |
| Rotación | Clockwise or counterclockwise; confirm selected model code |
| Focas | NBR or FKM options listed; confirm configuration and fluid compatibility |
| Mounting, Shaft & Ports | Confirm availability for the selected nominal size in the datasheet |
| Technical Documentation | A2FO Series Datasheet — Download PDF ↗ |
A2FO Series — Fixed Displacement Power for Open-Circuit Systems
The A2FO is a fixed displacement pump with an axial piston, bent-axis design. It is intended for hydrostatic drives in open circuits and is used in mobile machinery and industrial hydraulic installations.
Flow depends on displacement, drive speed and volumetric efficiency. Select the pump around your required operating point, then check the shaft, flange, rotation and connections against the installation.
The product’s compact design and drive shaft bearings support its intended mobile and industrial use. Final operating limits must be confirmed for the selected configuration.
Hydraulic Product & Configuration Support
Your Application.
The Right Configuration.
Hydraulic pumps · Hydraulic motors · Hydraulic valves
Prance provides hydraulic products and application support. For the A2FO series, begin with the hydraulic circuit and installation requirements so the proposed configuration can be reviewed before ordering.
- Model review — send the full model code or an existing nameplate photograph.
- Interface matching — confirm shaft, mounting flange, rotation and ports.
- Operating conditions — provide flow, pressure, speed, fluid and duty cycle.
- Documentation — request the relevant product data and drawings for your review.
Buying Guide
Before ordering an A2FO pump, confirm the operating point and mechanical interface. For a replacement, a full model code and clear photographs help establish the starting configuration.
- Confirm the required displacement or flow at operating speed.
- Specify continuous and peak system pressure and duty cycle.
- Review the open-circuit layout and inlet conditions.
- Confirm direction of rotation viewed from the shaft end.
- Match the shaft, mounting flange and service-line ports.
- Specify the fluid, seals, filtration and temperature requirements.
- Review the proposed model, documentation and quantity before ordering.
How We Support Your Business
Selection Support
Learn more →Share your hydraulic circuit, operating point and installation requirements for a configuration discussion.
Flow · Pressure · Speed · Interfaces
Technical Resources
Learn more →Review product documentation, model codes and technical data before finalizing the specification.
Datasheets · Model codes · Drawings
Project Inquiries
Learn more →Send your required model, quantity, application and project requirements to discuss your inquiry.
Product inquiries · Configuration review
Looking for the Right A2FO Pump for Your Application?
Send your model code, required flow and pressure, installation details and quantity.
Start a product discussion with the Prance team.
Preguntas frecuentes
Is the A2FO a fixed displacement pump?
Yes. The A2FO is a fixed displacement axial piston pump with a bent-axis design. Its displacement is not adjusted by a variable displacement control.
Which hydraulic circuit is it intended for?
The current Prance product page specifies open-circuit hydrostatic drives in mobile and industrial applications. Confirm inlet conditions, duty cycle and operating limits before selection.
How do I select the correct A2FO size?
Start with required flow, operating speed, continuous and peak pressure. Then confirm rotation, shaft, mounting flange, ports, fluid and seals against the approved datasheet.
What should I send for a replacement pump inquiry?
Send a clear photograph of the existing nameplate, the full model code if available, mounting dimensions, shaft and port details, operating conditions and required quantity.
Where can I find technical data and the model code?
The original A2FO PDF is linked below. Use it to review the model code and technical data, and confirm the final configuration with Prance before ordering.
A2FO Technical Data
View the listed size, displacement, speed and flow table
| Tamaño nominal | Desplazamiento mL/rev | Listed speed¹ rpm | Theoretical flow L/min at listed speed |
|---|---|---|---|
| A2FO 10 | 10.3 | 3,150 | 32.4 |
| A2FO 12 | 12 | 3,150 | 37.8 |
| A2FO 16 | 16 | 3,150 | 50 |
| A2FO 23 | 22.9 | 2,500 | 57 |
| A2FO 28 | 28.1 | 2,500 | 70 |
| A2FO 32 | 32 | 2,500 | 80 |
| A2FO 45 | 45.6 | 2,240 | 102 |
| A2FO 56 | 56.1 | 2,000 | 112 |
| A2FO 63 | 63 | 2,000 | 126 |
| A2FO 80 | 80.4 | 1,800 | 144 |
| A2FO 90 | 90 | 1,800 | 162 |
| A2FO 107 | 106.7 | 1,600 | 170 |
| A2FO 125 | 125 | 1,600 | 200 |
| A2FO 160 | 160.4 | 1,450 | 232 |
| A2FO 180 | 180 | 1,450 | 261 |
Reference values from the original Prance A2FO page. Speed values apply at 0.1 MPa absolute inlet pressure with mineral oil of density 0.88 kg/L. Flow values are theoretical and rounded. Confirm all limits and conditions against the approved datasheet.
Watch A2FO Product Video
Productos relacionados
Explore more hydraulic pumps from Prance.
Código de modelo
| A2F | ○ | 80 | /6 | 1 | R | -P | A | B | 0.5 |
| Unidad de pistones axiales | Modo de operación | Tamaño (ml/r) | Series | Índice | Sentido de rotación | Focas | Extremo del eje | Brida de montaje | Puertos de la línea de servicio |
| A2F:
Diseño de eje inclinado, fijo dispia- cemento |
○:
Bomba, circuitos abiertos |
10
12 16 |
6 | 1 | (Visto desde el extremo del eje) | P:
NBR (nitrilo) caucho |
Ver más abajo | B:
de 4 agujeros ISO 3019-2 |
Ver más abajo |
| 23
28 32 |
|||||||||
| 45 | R:
En el sentido de las agujas del reloj |
||||||||
| 56
63 |
V:
FKM (fluor~ caucho |
||||||||
| 80
90 |
L
Contra- en el sentido de las agujas del reloj |
||||||||
| 107
125 |
|||||||||
| 160
180 |
Extremo del eje
| Tamaño | 10 | 12 | 16 | 23 | 28 | 32 | 45 | 56 | 63 | 80 | 90 | 107 | 125 | 160 | 180 | |
| Eje estriado DIN 5480 | A | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | / | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| Z | ✓ | ✓ | / | ✓ | ✓ | / | ✓ | ✓ | / | ✓ | / | ✓ | / | ✓ | / | |
| Eje con chaveta paralela, DIN 6885 | B | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | / | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| P | ✓ | ✓ | / | ✓ | ✓ | / | ✓ | ✓ | / | ✓ | / | ✓ | / | ✓ | / | |
Puerto de línea de servicio1)
| Tamaño | 10 | 12 | 16 | 23 | 28 | 32 | 45 | 56 | 63 | 80 | 90 | 107 | 125 | 160 | 180 |
| 05: Puertos de brida SAE A y B,
en el lateral y brida SAE puerto S, trasero |
/ | / | / | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| Puertos roscados A y B,
en el lateral y brida SAE puerto S, trasero |
✓ | ✓ | ✓ | / | / | / | / | / | / | / | / | / | / | / | / |
✓=disponible /=no disponible
1) = las roscas de fijación o los orificios roscados son métricos
Datos técnicos
Tabla de valores (valores teóricos, ignorando $\eta$)mín y ηv; valores redondeados
| Tamaño | 10 | 12 | 16 | 23 | 28 | 32 | 45 | |||
| Desplazamiento | Vg | mL/r | 10.3 | 12 | 16 | 22.9 | 28.1 | 32 | 45.6 | |
| Velocidad máxima | Nmáx1) | rpm | 3150 | 3150 | 3150 | 2500 | 2500 | 2500 | 2240 | |
| nlímite máximo2) | rpm | 6000 | 6000 | 6000 | 4750 | 4750 | 4750 | 4250 | ||
| Caudal máx. | en ymáx | qv máx | L/min | 32.4 | 37.8 | 50 | 57 | 70 | 80 | 102 |
| Poder en | ΔP=35MPa | Pmáx | Nm/MPa | 18.9 | 22 | 29.2 | 33 | 41 | 47 | 59.5 |
| ΔP=40MPa | Pmáx | Nm | 21.6 | 25 | 34 | 38 | 47 | 53 | 68 | |
| Par en | ΔP=35MPa | T | Nm | 57 | 67 | 88 | 126 | 156 | 178 | 254 |
| ΔP=40MPa | T | Nm | 65 | 76 | 101 | 145 | 178 | 203 | 290 | |
| Capacidad de llenado | L | 0.17 | 0.17 | 0.17 | 0.20 | 0.20 | 0.20 | 0.33 | ||
| Masa (aprox.) | m | kg | 6 | 6 | 6 | 9.5 | 9.5 | 9.5 | 13.5 | |
| Tamaño | 56 | 63 | 80 | 90 | 107 | 125 | 160 | 180 | |||
| Desplazamiento | Vg | mL/r | 56.1 | 63 | 80.4 | 90 | 106.7 | 125 | 160.4 | 180 | |
| Velocidad máxima | Nmáx1) | rpm | 2000 | 2000 | 1800 | 1800 | 1600 | 1600 | 1450 | 1450 | |
| nlímite máximo2) | rpm | 3750 | 3750 | 3350 | 3350 | 3000 | 3000 | 2650 | 2650 | ||
| Caudal máx. | en ymáx | qv máx | L/min | 112 | 126 | 144 | 162 | 170 | 200 | 232 | 261 |
| Poder en | ΔP=35MPa | Pmáx | Nm/MPa | 65 | 73.5 | 84 | 95 | 100 | 117 | 135 | 152 |
| ΔP=40MPa | Pmáx | Nm | 75 | 84 | 96 | 108 | 114 | 133 | 155 | 174 | |
| Par en | ΔP=35MPa | T | Nm | 312 | 350 | 445 | 501 | 594 | 696 | 893 | 1003 |
| ΔP=40MPa | T | Nm | 356 | 400 | 511 | 572 | 678 | 795 | 1020 | 1145 | |
| Capacidad de llenado | L | 0.45 | 0.45 | 0.55 | 0.55 | 0.8 | 0.8 | 1.1 | 1.1 | ||
| Masa (aprox.) | m | kg | 18 | 18 | 23 | 23 | 32 | 32 | 45 | 45 | |
1) los valores mostrados son válidos para una presión absoluta (Pabdominales) de 0,1 MPa en la entrada de succión S y cuando se opera con aceite mineral (con una masa específica de 0,88 kg/L)
2) por aumento de la presión de entrada (Pabs>0,1 MPa) las velocidades de rotación se pueden aumentar hasta las velocidades máximas admisibles nlímite máximo (límites de velocidad) (ver diagrama en la página 99)
Determinación del tamaño
| Flujo | qv=(Vg ∙ n ∙ ηv) / 1000 | l/min |
| Par de torsión | T=(Vg ∙ Δp) / 20 ∙ π ∙ ηMh | Nm |
| Poder | P=(2π ∙ T ∙ n)/60000=(qv ∙ Δp)/600 ∙ ηt | kW |
Vg = Desplazamiento por revolución en mL/r
Δp = Presión diferencial en MPa
n = Velocidad en rpm
ηv Eficiencia volumétrica
ηMh Eficiencia mecánico-hidráulica
ηt = Eficiencia general