Wenzhou Prance Hydraulic Equipment Co., Ltd
A2F Fixed Displacement Hydraulic Motor
The A2F product is listed as a fixed displacement hydraulic motor. Its family documentation also includes pump operating conditions, making the intended operating mode and rotation an essential part of selection rather than an assumption from the A2F name.
- Fixed displacement hydraulic motor listing
- ISO mounting flange reference
- Radial shaft-load review required
- Technical material includes separate pump and motor conditions
PRANCE HYDRAULIC · PRODUCT SERIES
Axial piston; fixed displacement · Confirm motor operating mode and circuit
The A2F product is listed as a fixed displacement hydraulic motor. Its family documentation also includes pump operating conditions, making the intended operating mode and rotation an essential part of selection rather than an assumption from the A2F name.
Model

Confirm the complete model and approved specification with Prance Hydraulic. Product-series references alone do not establish interchangeability.
Configuration review · Technical documentation · Product selection
Detalhes do Produto
- Fixed displacement hydraulic motor listing
- ISO mounting flange reference
- Radial shaft-load review required
- Technical material includes separate pump and motor conditions
CATEGORIES: Motor de deslocamento fixo, Motor de pistões
A2F Features & Application
Fixed displacement hydraulic motor listing
For a fixed displacement, flow and speed remain linked by the selected displacement. Check the actual operating point and efficiency.
ISO mounting flange reference
Check pilot diameter, bolt pattern, shaft engagement or port pattern against the approved installation drawing.
Radial shaft-load review required
Calculate the external radial and axial loads at their actual distance from the mounting face. Bearing type alone is not a load rating.
Technical material includes separate pump and motor conditions
Specify the full MS order code, installation drawing and operating duty so the quotation can identify the proposed configuration.
A2F Specifications
| Series / model | A2F |
|---|---|
| Product type | A2F Fixed Displacement Hydraulic Motor |
| Design | Axial piston; fixed displacement |
| Circuit / selection | Confirm motor operating mode and circuit |
| Product role on this page | Hydraulic motor |
| Operating-mode check | Separate motor data from pump data in the family documentation |
A2F Selection & Configuration
The A2F product is listed as a fixed displacement hydraulic motor. Its family documentation also includes pump operating conditions, making the intended operating mode and rotation an essential part of selection rather than an assumption from the A2F name.
For a motor application, use the motor-specific pressure, speed and flow relationships. Do not apply a pump inlet-pressure condition to a motor port. Confirm fluid compatibility and the permissible radial load for the exact shaft and bearing arrangement.

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
Hydraulic pumps · Hydraulic motors · Hydraulic valves
Send the MS nameplate, operating requirements and installation drawing for a configuration review before quoting.
- Model review — send the full model code or an existing nameplate photograph.
- Interface matching — confirm shaft, mounting flange, rotation and ports.
- Operating conditions — provide flow, pressure, speed, fluid and duty cycle.
- Documentation — request the relevant product data and drawings for your review.

A2F Buying Guide
Use this sequence to prepare the MS configuration for review and quotation.
- Define starting and continuous torque, speed range and duty cycle.
- Specify available flow, work-port pressure difference and return pressure.
- Confirm the displacement setting and required behavior during starting and stopping.
- Check shaft, mounting pilot, flange, port orientation and external loads.
- Review case drainage, replenishment and any displacement control.
- Specify fluid conditions and any independent braking requirement.
- Approve the complete model, operating envelope, drawing and quantity.

Selection, Documentation & Project Support

Selection Support
Learn more →Share your hydraulic circuit, operating point and installation requirements for a configuration discussion.
Flow · Pressure · Speed · Interfaces

Technical Resources
Learn more →Review product documentation, model codes and technical data before finalizing the specification.
Datasheets · Model codes · Drawings

Project Inquiries
Learn more →Send your required model, quantity, application and project requirements to discuss your inquiry.
Product inquiries · Configuration review
Configuration, Quantity & Delivery
Confirm the complete MS code, approved drawing and operating limits. Availability, quantity, documentation and delivery date are confirmed in the quotation.
Discuss Your A2F Application
Send the full model code, operating duty, installation details and quantity.
Request a A2F QuotationA2F Questions Before Ordering
What type of product is the A2F?
A2F Fixed Displacement Hydraulic Motor. Design: Axial piston; fixed displacement. Confirm motor operating mode and circuit. Confirm the complete order code for the offered version.
Can a similar motor replace the A2F?
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
A2F Technical Data & Documents
View A2F catalog data and operating conditions
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
Dados Técnicos
Inlet Operating Pressure: Pump : Minimum pressure at ports S, A or B: Pabs——————0. 08MPa In closed circuits, the feed pressure must be between 0.2MPa and 0.6MPa, depending on pump speed and viscosity of hydraulic fluid. •Motor: Pressure at port A or B: Nominal pressure——————–Pn =35MPa Peak pressure———————Pmáx=40MPa The sum of the pressures at ports A and B must not exceed 7OMPa (individual pressure on either side max 40MPa) •outlet Operating Pressure •Pump: Nominal pressure————–Pn=35MPa Peak pressure————–Pmáx=40MPa Maximum permissible case pressure(at port T): Pabs—————0.2MPa •Oil Temperature Range:-25℃~80℃ •Viscosity Range T min——————————————10mm2/s T máx—————-( for short periods ) 1000mm2/s Optimum Operating Viscosity:—————————16-25mm2/s Fluid Recommendation :40 low-solidifing •Filtration of hydraulic Fluid: Recommended filtration 10um. Coarser filtration of 25 to40um is acceptable,However longer service life is achieved. •Speed Range: No limitation on minimum speed, If high uniformity of rotation is required,nmen should not be less than 50r/min,See table on page 5 for maximum speed. •Mounting position: Arbitrarily Choose, the housing must be filled with oil; •Flow direction:| Sentido horário: | Sentido anti-horário |
| A para B S para B (Circuito Aberto) | B para A S para A (Circuito Aberto) |
Contracapa:
![]() |
PresssurePort Drain Port Suction | ||
| Cálculo do Tamanho | |||
| bomba | Fluxo de saída | Q=(Vg×n×ŋv)/1000 | [L/min] |
| Binário de entrada | M=0.159×Vg×Δp/ŋmh | [N:m] | |
| Potência de entrada | P=(Q×Δp)/(60×ŋ)t) | [Kw] | |
| Motor: | Fluxo de entrada | Q=(Vg×n)/(1000×ŋv) | [L/min] |
| Velocidade de saída | n=(Q×1000×ŋv)/Vg | [r/min] | |
| Binário de saída | M=0,159×Vg×Δp×ŋmh | [Nm] | |
| Potência de saída | P=(Q×Δp×ŋt)/60 | [Kw] | |
| Vg=deslocamento geométrico máximo | [ml/r] | ||
| M=binário | [N.m] | ||
| Δp = pressão diferencial | [MPa] | ||
| n=velocidade | [r/min] | ||
| ηv=eficiência volumétrica | |||
| ηm=eficiência mecânica- -hidráulica | |||
| ηt=eficiência global | |||
| Used for close system pump. /motor | sistema | 10~160 | 200~500 | ||
| 1.A,B Thread | ![]() |
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | ![]() |
1. Flange A,B | |
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | ![]() |
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | ![]() |
![]() |
|
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | ![]() |
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | ![]() |
Flange 2.B,S |
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | ![]() |
![]() |
|||
Dados Técnicos Valores Teóricos, Sem Considerar η m e ηV, Valores arredondados.
| Tamanho | 10 | 12 | 23 | 28 | 45 | 55 | 63 | 80 | 107 | 125 | 160 | 200 | 250 | 355 | 500 | ||
| Cilindrada Vg(ml/r) | 9.4 | 11.6 | 22.7 | 28.1 | 44.3 | 54.8 | 63 | 80 | 107 | 125 | 160 | 200 | 250 | 355 | 500 | ||
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | Circuito Fechado | 7500 | 6000 | 5600 | 4750 | 4500 | 3750 | 4000 | 3350 | 3000 | 3150 | 2650 | 2500 | 2500 | 2240 | 2000 | |
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | 0.09 | 4700 | 3750 | 3750 | 2800 | 2850 | 2360 | 2550 | 2120 | 1900 | 2120 | 1650 | 1700 | 1400 | 1250 | 1120 | |
| 0.10 | 5000 | 4000 | 4000 | 3000 | 3000 | 2500 | 2700 | 2240 | 2000 | 2240 | 1750 | 1800 | 1500 | 1320 | 1200 | ||
| 0.15 | 6000 | 4900 | 4900 | 3600 | 3550 | 3000 | 3300 | 2750 | 2450 | 2750 | 2100 | 2180 | 1850 | 1650 | 1500 | ||
| Max Flow Q max(I/min) | Circuito Fechado | 71 | 70 | 127 | 133 | 199 | 206 | 253 | 268 | 321 | 394 | 424 | 500 | 625 | 795 | 1000 | |
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | 0.09 | 43 | 42 | 83 | 76 | 122 | 125 | 156 | 165 | 197 | 257 | 256 | 330 | 340 | 430 | 543 | |
| 0.10 | 46 | 45 | 88 | 82 | 129 | 133 | 165 | 174 | 208 | 272 | 272 | 349 | 364 | 455 | 582 | ||
| 0.15 | 55 | 55 | 108 | 98 | 157 | 159 | 202 | 213 | 251 | 333 | 326 | 423 | 449 | 568 | 728 | ||
| Max Power Pmax(Kw) Δp=35MPa | Circuito Fechado | 41 | 41 | 74 | 78 | 116 | 120 | 147 | 156 | 187 | 230 | 247 | 292 | 365 | 454 | 583 | |
| Open Circuit Inlet Pressure (Pabs =MPa) | 0.09 | 25 | 25 | 48 | 44 | 71 | 73 | 91 | 96 | 115 | 150 | 149 | 192 | 198 | 251 | 317 | |
| 0.10 | 27 | 26 | 51 | 48 | 75 | 78 | 96 | 101 | 121 | 159 | 159 | 204 | 212 | 265 | 340 | ||
| 0.15 | 32 | 32 | 63 | 57 | 92 | 93 | 118 | 124 | 148 | 194 | 190 | 247 | 262 | 331 | 424 | ||
| Electric Motor Speed n=1450/min | Flow Close Circuit | 13.6 | 16.8 | 32.9 | 40.7 | 64.2 | 79.5 | 91.3 | 116 | 155.2 | 181.2 | 232 | 290 | 363 | 515 | 725 | |
| Q(l/min)Open Circuit | 13.2 | 16.3 | 31.9 | 39.5 | 62.3 | 77.1 | 88.6 | 112.5 | 150.5 | 175.8 | 225 | 281 | 352 | 499 | 703 | ||
| P(Kw) Close Δp=35MPa Open | 7.9 | 9.8 | 19.2 | 23.7 | 27.4 | 46 | 53 | 67.7 | 90 | 106 | 135 | 169 | 212 | 300 | 423 | ||
| 7.7 | 9.5 | 18.6 | 23 | 36.3 | 45 | 51.7 | 66 | 88 | 1.3 | 131 | 169 | 212 | 300 | 423 | |||
| Binário (N.m) | Δp= 10MPa | 15 | 18 | 36 | 44.7 | 70 | 87 | 100 | 127 | 170 | 199 | 254 | 318 | 398 | 564 | 795 | |
| Δp=35MPa | 52 | 65 | 126 | 156 | 247 | 305 | 351 | 445 | 595 | 696 | 890 | 1113 | 1391 | 1976 | 2783 | ||
| Peso Aprox. (kg) | 5 | 5 | 12 | 12 | 23 | 23 | 33 | 33 | 44 | 63 | 63 | 88 | 88 | 138 | 185 | ||
Notas:
1.These values are valid provided there is an absolute pressure at suction inlet Sand when operated on mineral oil. Permissible speed nperm can be determined from the nomograph. In motor operation the permissible speed for closed circuit system and boosted operation are also valid for open circuit system. When suction pressure Pabs > 0. 1MPa, the permissible speed can be increased in open circuits (Self-suction operation). But when suction pressure Pabs < 0.1 MPa, the permissible speed must be reduced.
Example:
Given:size 55,Drive speed 2400r/min
Required:pressure Pabs at the suction Inlet S.
Solution:Line 1 on scale nperm drawn towards size 55 crosses line H at point A .line 11 from point A to point B(open circuit) gives the result:
Pabs > 0.094MPa.
The following are always used together:
1.Scales Pabs,type of circuit and line H.
2.Line H,size scale and nperm.Related Selection Resources
Request a A2F Quotation
Tell us your required configuration, quantity and application.
Dados Técnicos
Pressão de Funcionamento à Entrada:
Bomba
Pressão mínima nas portas S, A ou B: Pabs------------------0. 08MPa Em circuitos fechados, a alimentação
a pressão deve estar entre 0,2MPa e 0,6MPa, dependendo da velocidade da bomba e da viscosidade do fluido hidráulico.
•Motor: Pressão na porta A ou B:
Pressão nominal--------------------Pn =35MPa
Pressão máxima---------------------Pmáx=40MPa
A soma das pressões nas portas A e B não deve exceder 70 MPa
(pressão individual em cada um dos lados máx. 40 MPa)
• Pressão de funcionamento da saída
•Bomba: Pressão nominal--------------Pn=35MPa
Pressão de pico--------------Pmáx=40MPa
Pressão máxima admissível na caixa (na porta T):
Pabs---------------0,2MPa
•Gama de Temperatura do Óleo: -25℃~80℃
• Gama de Viscosidade
T min------------------------------------------10 mm2/s
T máx----------------( por curtos períodos ) 1000 mm2/s
Viscosidade ideal de funcionamento:---------------------------16-25 mm2/s
Recomendação de fluido :40 de baixa solidificação
• Filtração de fluido hidráulico:
Filtração recomendada de 10um. Uma filtração mais grosseira de 25 a 40um é aceitável; no entanto, obtém-se uma maior vida útil.
• Gama de Velocidades:
Sem limitação de velocidade mínima,
Se for necessária uma elevada uniformidade de rotação,men não deve ser inferior a 50 r/min, veja a tabela na página 5 para a velocidade máxima.
•Posição de montagem:
Escolha arbitrariamente, a carcaça tem de ser enchida com óleo;
• Sentido do fluxo:
| Sentido horário: | Sentido anti-horário |
| A para B S para B (Circuito Aberto) | B para A S para A (Circuito Aberto) |
Contracapa:
![]() |
PressurePort Orifício de drenagem Aspiração |
||
| Cálculo do Tamanho | |||
| bomba | Fluxo de saída | Q=(Vg×n×ŋv)/1000 | [L/min] |
| Binário de entrada | M=0.159×Vg×Δp/ŋmh | [N:m] | |
| Potência de entrada | P=(Q×Δp)/(60×ŋ)t) | [Kw] | |
| Motor: | Fluxo de entrada | Q=(Vg×n)/(1000×ŋv) | [L/min] |
| Velocidade de saída | n=(Q×1000×ŋv)/Vg | [r/min] | |
| Binário de saída | M=0,159×Vg×Δp×ŋmh | [Nm] | |
| Potência de saída | P=(Q×Δp×ŋt)/60 | [Kw] | |
| Vg=deslocamento geométrico máximo | [ml/r] | ||
| M=binário | [N.m] | ||
| Δp = pressão diferencial | [MPa] | ||
| n=velocidade | [r/min] | ||
| ηv=eficiência volumétrica | |||
| ηm=eficiência mecânica- -hidráulica | |||
| ηt=eficiência global | |||
| Utilizado para fechar sistema bomba. /motor |
sistema | 10~160 | 200~500 | ||
| 1.A,B Tópico |
![]() |
6.A,B Flange |
![]() |
1. Flange A,B | |
| 2. A,B Flange |
![]() |
7.A,B Flange |
![]() |
![]() |
|
| Utilizado para abrir sistema bomba |
3.A,B Flange |
![]() |
5.B,S Verme-espinho |
![]() |
Flange 2.B,S |
| 4.B,S Tópico |
![]() |
![]() |
|||
Dados Técnicos Valores Teóricos, Sem Considerar η m e ηV, Valores arredondados.
| Tamanho | 10 | 12 | 23 | 28 | 45 | 55 | 63 | 80 | 107 | 125 | 160 | 200 | 250 | 355 | 500 | ||
| Cilindrada Vg(ml/r) | 9.4 | 11.6 | 22.7 | 28.1 | 44.3 | 54.8 | 63 | 80 | 107 | 125 | 160 | 200 | 250 | 355 | 500 | ||
| Velocidade máxima n máx (r/min) |
Circuito Fechado | 7500 | 6000 | 5600 | 4750 | 4500 | 3750 | 4000 | 3350 | 3000 | 3150 | 2650 | 2500 | 2500 | 2240 | 2000 | |
| Circuito aberto Pressão de entrada (Pabs=MPa) |
0.09 | 4700 | 3750 | 3750 | 2800 | 2850 | 2360 | 2550 | 2120 | 1900 | 2120 | 1650 | 1700 | 1400 | 1250 | 1120 | |
| 0.10 | 5000 | 4000 | 4000 | 3000 | 3000 | 2500 | 2700 | 2240 | 2000 | 2240 | 1750 | 1800 | 1500 | 1320 | 1200 | ||
| 0.15 | 6000 | 4900 | 4900 | 3600 | 3550 | 3000 | 3300 | 2750 | 2450 | 2750 | 2100 | 2180 | 1850 | 1650 | 1500 | ||
| Fluxo Máximo Q máx.(I/mín.) |
Circuito Fechado | 71 | 70 | 127 | 133 | 199 | 206 | 253 | 268 | 321 | 394 | 424 | 500 | 625 | 795 | 1000 | |
| Circuito aberto Pressão de entrada (Pabs=MPa) |
0.09 | 43 | 42 | 83 | 76 | 122 | 125 | 156 | 165 | 197 | 257 | 256 | 330 | 340 | 430 | 543 | |
| 0.10 | 46 | 45 | 88 | 82 | 129 | 133 | 165 | 174 | 208 | 272 | 272 | 349 | 364 | 455 | 582 | ||
| 0.15 | 55 | 55 | 108 | 98 | 157 | 159 | 202 | 213 | 251 | 333 | 326 | 423 | 449 | 568 | 728 | ||
| Máxima Potência Pmax(kW) Δp=35MPa |
Circuito Fechado | 41 | 41 | 74 | 78 | 116 | 120 | 147 | 156 | 187 | 230 | 247 | 292 | 365 | 454 | 583 | |
| Circuito aberto Pressão de entrada (Pabs =MPa) |
0.09 | 25 | 25 | 48 | 44 | 71 | 73 | 91 | 96 | 115 | 150 | 149 | 192 | 198 | 251 | 317 | |
| 0.10 | 27 | 26 | 51 | 48 | 75 | 78 | 96 | 101 | 121 | 159 | 159 | 204 | 212 | 265 | 340 | ||
| 0.15 | 32 | 32 | 63 | 57 | 92 | 93 | 118 | 124 | 148 | 194 | 190 | 247 | 262 | 331 | 424 | ||
| Motor elétrico Velocidade n=1450/min |
Encerramento de Fluxo Circuito |
13.6 | 16.8 | 32.9 | 40.7 | 64.2 | 79.5 | 91.3 | 116 | 155.2 | 181.2 | 232 | 290 | 363 | 515 | 725 | |
| Q(l/min)Aberto Circuito |
13.2 | 16.3 | 31.9 | 39.5 | 62.3 | 77.1 | 88.6 | 112.5 | 150.5 | 175.8 | 225 | 281 | 352 | 499 | 703 | ||
| P(Kw) Fechar Δp=35MPa Aberto |
7.9 | 9.8 | 19.2 | 23.7 | 27.4 | 46 | 53 | 67.7 | 90 | 106 | 135 | 169 | 212 | 300 | 423 | ||
| 7.7 | 9.5 | 18.6 | 23 | 36.3 | 45 | 51.7 | 66 | 88 | 1.3 | 131 | 169 | 212 | 300 | 423 | |||
| Binário (N.m) | Δp= 10MPa | 15 | 18 | 36 | 44.7 | 70 | 87 | 100 | 127 | 170 | 199 | 254 | 318 | 398 | 564 | 795 | |
| Δp=35MPa | 52 | 65 | 126 | 156 | 247 | 305 | 351 | 445 | 595 | 696 | 890 | 1113 | 1391 | 1976 | 2783 | ||
| Peso Aprox. (kg) | 5 | 5 | 12 | 12 | 23 | 23 | 33 | 33 | 44 | 63 | 63 | 88 | 88 | 138 | 185 | ||
Notas:
1.Estes valores são válidos desde que exista uma pressão absoluta na entrada de aspiração S e quando operado com óleo mineral.
A velocidade admissível nperm pode ser determinada a partir do nomograma. No funcionamento como motor, a velocidade admissível para o sistema em circuito fechado e funcionamento com pressão de carga também é válida para o sistema em circuito aberto. Quando a pressão de aspiração Pabs > 0,1 MPa, a velocidade admissível pode ser aumentada em circuitos abertos (funcionamento por auto-aspiração). No entanto, quando a pressão de aspiração Pabs < 0,1 MPa, a velocidade admissível deve ser reduzida.

Exemplo:
Tamanho 55, Velocidade de acionamento 2400 r/min
Necessário: pressão Pabs na admissão de sucção S.
Solução: A linha 1 na escala nperm traçada para o tamanho 55 cruza a linha H no ponto A. A linha 11 do ponto A ao ponto B (circuito aberto) dá o resultado:
Pabs > 0,094MPa.
Estes são sempre usados em conjunto:
1. Escalas Pabs, tipo de circuito e linha H.
2. Linha H, escala de tamanho e nperm.

















