شركة ونزهو برانس للمعدات الهيدروليكية المحدودة
PVXS Swashplate Variable Displacement Piston Pump
The PVXS variable displacement pump uses a swashplate axial piston design, as stated in the existing technical table. It should not be described as a bent-axis pump. The published model groups are 66, 90, 130, 180 and 250.
- Swashplate axial piston design
- Model sizes 66, 90, 130, 180 and 250
- Flange or foot mounting listed
- Tandem arrangement requires mounting and torque review
PRANCE HYDRAULIC · PRODUCT SERIES
Axial piston; swashplate · Confirm the selected industrial circuit
The PVXS variable displacement pump uses a swashplate axial piston design, as stated in the existing technical table. It should not be described as a bent-axis pump. The published model groups are 66, 90, 130, 180 and 250.
Model

Confirm the complete model and approved specification with Prance Hydraulic. Product-series references alone do not establish interchangeability.
Configuration review · Technical documentation · Product selection
تفاصيل المنتج
- Swashplate axial piston design
- Model sizes 66, 90, 130, 180 and 250
- Flange or foot mounting listed
- Tandem arrangement requires mounting and torque review
CATEGORIES: مضخة ذات إزاحة متغيرة, مضخة مكبسية
PVXS Features & Application
Swashplate axial piston design
Specify the full MS order code, installation drawing and operating duty so the quotation can identify the proposed configuration.
Model sizes 66, 90, 130, 180 and 250
Include the series and all order-code suffixes in the enquiry. A common nominal size does not establish compatibility.
Flange or foot mounting listed
Check pilot diameter, bolt pattern, shaft engagement or port pattern against the approved installation drawing.
Tandem arrangement requires mounting and torque review
Check pilot diameter, bolt pattern, shaft engagement or port pattern against the approved installation drawing.
PVXS Specifications
| Series / model | PVXS |
|---|---|
| Product type | PVXS Swashplate Variable Displacement Piston Pump |
| تصميم | Axial piston; swashplate |
| Circuit / selection | Confirm the selected industrial circuit |
| Published model sizes | 66, 90, 130, 180 and 250 |
| الضغط الاسمي | 350 bar at 100% duty in the existing table |
| Maximum pressure | 420 bar; confirm permitted operating conditions |
| Published speed range | 150–1800 rpm; review the selected operating point |
PVXS Selection & Configuration
The PVXS variable displacement pump uses a swashplate axial piston design, as stated in the existing technical table. It should not be described as a bent-axis pump. The published model groups are 66, 90, 130, 180 and 250.
For an industrial drive, distinguish nominal pressure from the maximum pressure and check the speed range at the required displacement. Tandem mounting also changes the installation and drive-torque review. Confirm the selected control, suction pressure and case-pressure allowance.

Your Application.
The Right Configuration.
Hydraulic pumps · Hydraulic motors · Hydraulic valves
Send the MS nameplate, operating requirements and installation drawing for a configuration review before quoting.
- Model review — send the full model code or an existing nameplate photograph.
- Interface matching — confirm shaft, mounting flange, rotation and ports.
- Operating conditions — provide flow, pressure, speed, fluid and duty cycle.
- Documentation — request the relevant product data and drawings for your review.

PVXS Buying Guide
Use this sequence to prepare the MS configuration for review and quotation.
- Define required flow at the actual drive speed and continuous pressure.
- Identify peak pressure, duration and the work cycle.
- Confirm the selected displacement control and any auxiliary-drive requirement.
- Match rotation viewed from the shaft end, shaft, flange and ports.
- Review inlet conditions, drain routing and the installation envelope.
- Confirm fluid, viscosity, temperature, filtration and seals.
- Approve the complete model, control, drawing, quantity and delivery terms.

Selection, Documentation & Project Support

Selection Support
Learn more →Share your hydraulic circuit, operating point and installation requirements for a configuration discussion.
Flow · Pressure · Speed · Interfaces

Technical Resources
Learn more →Review product documentation, model codes and technical data before finalizing the specification.
Datasheets · Model codes · Drawings

Project Inquiries
Learn more →Send your required model, quantity, application and project requirements to discuss your inquiry.
Product inquiries · Configuration review
Configuration, Quantity & Delivery
Confirm the complete MS code, approved drawing and operating limits. Availability, quantity, documentation and delivery date are confirmed in the quotation.
Discuss Your PVXS Application
Send the full model code, operating duty, installation details and quantity.
Request a PVXS QuotationPVXS Questions Before Ordering
What type of product is the PVXS?
PVXS Swashplate Variable Displacement Piston Pump. Design: Axial piston; swashplate. Confirm the selected industrial circuit. Confirm the complete order code for the offered version.
Can a similar pump replace the PVXS?
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
Define required flow at the actual drive speed and continuous pressure. Identify peak pressure, duration and the work cycle. Attach the nameplate, complete order code, installation drawing and required quantity.
PVXS Technical Data & Documents
View PVXS catalog data and operating conditions
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
البيانات الفنية
| الموديل | 66 | 90 | 130 | 180 | 250 | ||
| تصميم | Swashplate – Axial piston pump | ||||||
| نوع التركيب | مركبة على فلنجة أو قاعدة قدم. الت tandem مركبة على القدم فقط | ||||||
| اتصال أنابيب فلنجة SAE | B | رطل لكل بوصة مربعة | 1 1/2″=3000 | 2″=3000 | 2 1/2″=3000 | 2 1/2″=3000 | 3 1/2″=500 |
| A | 1″=6000 | 1″=6000 | 1″=6000 | 1 1/4″=6000 | 1 1/4″=6000 | ||
| اتجاه الدوران | Clockwise when viewing shaft end of pump Counterclockwise available on request | ||||||
| نطاق السرعة | nالحد الأدنى | دورة في الدقيقة | 150 | ||||
| nالحد الأقصى | 1800 | ||||||
| وضعية التركيب | اختياري، انظر معلومات التركيب | ||||||
| نطاق درجة حرارة البيئة | الحد الأدنى | ℉ | -4 | ||||
| الحد الأقصى | 122 | ||||||
| الوزن | m | lb | 121 | 165 | 234 | 251 | 467 |
| كتلة القصور الذاتي | J | رطل قدم2 | 0.38 | 0.38 | 1.068 | 1.068 | 3.465 |
هيدروليكي الخصائص
| السائل الهيدروليكي | زيت هيدروليكي وفقًا لDIN 51524 الجزء 2. يرجى الرجوع إلى قسم بيانات التطبيق - توصيات السوائل | |||||||
| نطاق درجة حرارة السائل الهيدروليكي | الحد الأدنى | ℉ | -13 (عند التشغيل) | |||||
| الحد الأقصى | 194 | |||||||
| نطاق اللزوجة للتشغيل المستمر | الحد الأدنى | سي إس تي | 10 | |||||
| الحد الأقصى | سي إس تي | 75 | ||||||
| الحد الأقصى المسموح به لزوجة البدء | الحد الأقصى | سي إس تي | 1000 | |||||
| التصفية | ISO 4406 | 18/15/13 | ||||||
| الحد الأقصى الهندسي | ن=1500 دورة في الدقيقة | Vg | in3 | 4.1 | 5.5 | 7.9 | 11 | 15.2 |
| الاسْتِهْلاك | ن=1800 دورة في الدقيقة | |||||||
| الحد الأقصى الهندسي | ن=1500 دورة في الدقيقة | Qg | USجم/غرام | 26 | 36 | 52 | 71 | 99 |
| تدفق المضخة | ن=1800 دورة في الدقيقة | 32 | 43 | 62 | 86 | 119 | ||
| ضغط الحالة | pv الأقصى | رطل لكل بوصة مربعة | حد أقصى 7.2 رطل لكل بوصة مربعة فوق p1. Pالحد الأقصى = 58 مطلق. | |||||
قيادة
| Maximum driving torque – single unit (p2 أقصى. ,η= 100%) | Mواحدة فردية | رطل. قدم | 325 | 444 | 640 | 887 | 1233 |
| Maximum power consumption – single unit (p2 أقصى.,η=100٪؛ n=1800 دورة في الدقيقة) | Pواحدة فردية | hp | 93 | 126 | 182 | 254 | 355 |
| Maximum driving torque limited to splined shaft only – comb. unit | M1 وحدة تجمع. | رطل. قدم | 2×325 | 2×444 | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits |
| الموديل | 66 | 90 | 130 | 180 | 250 | ||
| تصميم | Swashplate – Axial piston pump | ||||||
| نوع التركيب | مركبة على فلنجة أو قاعدة قدم. الت tandem مركبة على القدم فقط | ||||||
| اتصال أنابيب فلنجة SAE | B | رطل لكل بوصة مربعة | 1 1/2″=3000 | 2″=3000 | 2 1/2″=3000 | 2 1/2″=3000 | 3 1/2″=500 |
| A | 1″=6000 | 1″=6000 | 1″=6000 | 1 1/4″=6000 | 1 1/4″=6000 | ||
| اتجاه الدوران | Clockwise when viewing shaft end of pump Counterclockwise available on request | ||||||
| نطاق السرعة | nالحد الأدنى | الحد الأدنى-1 | 150 | ||||
| nالحد الأقصى | 1800 | ||||||
| وضعية التركيب | اختياري، انظر معلومات التركيب | ||||||
| نطاق درجة حرارة البيئة | الحد الأدنى | ℃ | -20 | ||||
| الحد الأقصى | 50 | ||||||
| الوزن | m | kg | 55 | 75 | 106 | 114 | 212 |
| كتلة القصور الذاتي | J | كجم م2 | 0.016 | 0.016 | 0.045 | 0.045 | 0.146 |
الخصائص الهيدروليكية
| الضغط الاسمي (دورة عمل بنسبة 100٪) | PN | بار | 350 | |||||
| ضغط الإدخال | P1 دقيقة | بار | 0.85 مطلق | |||||
| P1 أقصى | بار | 50 | ||||||
| الضغط الأقصى وفقًا لـ DIN 24312 | p2 أقصى | بار | 420 | |||||
| السائل الهيدروليكي | زيت هيدروليكي وفقًا لDIN 51524 الجزء 2. يرجى الرجوع إلى قسم بيانات التطبيق - توصيات السوائل | |||||||
| نطاق درجة حرارة السائل الهيدروليكي | الحد الأدنى | ℃ | -25 (عند التشغيل) | |||||
| الحد الأقصى | 90 | |||||||
| نطاق اللزوجة للتشغيل المستمر | الحد الأدنى | سي إس تي | 10 | |||||
| الحد الأقصى | سي إس تي | 75 | ||||||
| الحد الأقصى المسموح به لزوجة البدء | الحد الأقصى | سي إس تي | 1000 | |||||
| التصفية | ISO 4406 | 18/15/13 | ||||||
| الحد الأقصى الهندسي | ن=1500 دورة في الدقيقة-1 | Vg | سم3 | 66 | 90 | 130 | 180 | 250 |
| الاسْتِهْلاك | ن=1800 دورة في الدقيقة-1 | |||||||
| الحد الأقصى الهندسي | ن=1500 دورة في الدقيقة-1 | Qg | لتر/دقيقة | 99 | 135 | 195 | 270 | 375 |
| تدفق المضخة | ن=1800 دورة في الدقيقة-1 | 118 | 162 | 234 | 324 | 450 | ||
| ضغط الحالة | pv الأقصى | بار | حد أقصى 0.5 بار فوق p1. pmax = 4 بار مطلق. | |||||
قيادة
| Maximum driving torque – single unit (p2 أقصى. ,η= 100%) | Mواحدة فردية | لا شيء جديد | 440 | 600 | 868 | 1202 | 1671 |
| Maximum power consumption – single unit (p2 أقصى.,η=100٪؛ n=1800 دورة في الدقيقة-1) | Pواحدة فردية | كيلوواط | 69 | 94 | 136 | 189 | 265 |
| Maximum driving torque limited to splined shaft only – comb. unit | M1 وحدة تجمع. | لا شيء جديد | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits |
Related Selection Resources
Request a PVXS Quotation
أخبرنا بالتكوين المطلوب، الكمية والتطبيق.
البيانات الفنية
| الموديل | 66 | 90 | 130 | 180 | 250 | ||
| تصميم | لوح التموج - مضخة مكبس أسطواني | ||||||
| نوع التركيب | مركبة على فلنجة أو قاعدة قدم. الت tandem مركبة على القدم فقط | ||||||
| اتصال أنابيب فلنجة SAE | B | رطل لكل بوصة مربعة | 1 1/2"=3000 | 2"=3000 | 2 1/2"=3000 | 2 1/2"=3000 | 3 1/2"=500 |
| A | 1"=6000 | 1"=6000 | 1"=6000 | 1 1/4"=6000 | 1 1/4"=6000 | ||
| اتجاه الدوران | اتجاه عقارب الساعة عند مشاهدة نهاية العمود للمضخة متاح عكس اتجاه عقارب الساعة عند الطلب |
||||||
| نطاق السرعة | nالحد الأدنى | دورة في الدقيقة | 150 | ||||
| nالحد الأقصى | 1800 | ||||||
| وضعية التركيب | اختياري، انظر معلومات التركيب | ||||||
| نطاق درجة حرارة البيئة | الحد الأدنى | ℉ | -4 | ||||
| الحد الأقصى | 122 | ||||||
| الوزن | m | lb | 121 | 165 | 234 | 251 | 467 |
| كتلة القصور الذاتي | J | رطل قدم2 | 0.38 | 0.38 | 1.068 | 1.068 | 3.465 |
هيدروليكي الخصائص
| السائل الهيدروليكي | زيت هيدروليكي وفقًا لDIN 51524 الجزء 2. يرجى الرجوع إلى قسم بيانات التطبيق - توصيات السوائل | |||||||
| نطاق درجة حرارة السائل الهيدروليكي | الحد الأدنى | ℉ | -13 (عند التشغيل) | |||||
| الحد الأقصى | 194 | |||||||
| نطاق اللزوجة للتشغيل المستمر | الحد الأدنى | سي إس تي | 10 | |||||
| الحد الأقصى | سي إس تي | 75 | ||||||
| الحد الأقصى المسموح به لزوجة البدء | الحد الأقصى | سي إس تي | 1000 | |||||
| التصفية | ISO 4406 | 18/15/13 | ||||||
| الحد الأقصى الهندسي | ن=1500 دورة في الدقيقة | Vg | in3 | 4.1 | 5.5 | 7.9 | 11 | 15.2 |
| الاسْتِهْلاك | ن=1800 دورة في الدقيقة | |||||||
| الحد الأقصى الهندسي | ن=1500 دورة في الدقيقة | Qg | USجم/غرام | 26 | 36 | 52 | 71 | 99 |
| تدفق المضخة | ن=1800 دورة في الدقيقة | 32 | 43 | 62 | 86 | 119 | ||
| ضغط الحالة | pv الأقصى | رطل لكل بوصة مربعة | حد أقصى 7.2 رطل لكل بوصة مربعة فوق p1. Pالحد الأقصى = 58 مطلق. | |||||
قيادة
| عزم القيادة الأقصى - وحدة واحدة (p2 أقصى. ,η= 100%) | Mواحدة فردية | رطل. قدم | 325 | 444 | 640 | 887 | 1233 |
| استهلاك الطاقة الأقصى - وحدة واحدة (p2 أقصى.,η=100٪؛ n=1800 دورة في الدقيقة) | Pواحدة فردية | hp | 93 | 126 | 182 | 254 | 355 |
| عزم القيادة الأقصى محدود فقط على العمود المسمح - الوحدة المجمعة | M1 وحدة تجمع. | رطل. قدم | 2x325 | 2x444 | 2x640 | 2x887 | 2x1233 |
| الموديل | 66 | 90 | 130 | 180 | 250 | ||
| تصميم | لوح التموج - مضخة مكبس أسطواني | ||||||
| نوع التركيب | مركبة على فلنجة أو قاعدة قدم. الت tandem مركبة على القدم فقط | ||||||
| اتصال أنابيب فلنجة SAE | B | رطل لكل بوصة مربعة | 1 1/2"=3000 | 2"=3000 | 2 1/2"=3000 | 2 1/2"=3000 | 3 1/2"=500 |
| A | 1"=6000 | 1"=6000 | 1"=6000 | 1 1/4"=6000 | 1 1/4"=6000 | ||
| اتجاه الدوران | اتجاه عقارب الساعة عند مشاهدة نهاية العمود للمضخة متاح عكس اتجاه عقارب الساعة عند الطلب |
||||||
| نطاق السرعة | nالحد الأدنى | الحد الأدنى-1 | 150 | ||||
| nالحد الأقصى | 1800 | ||||||
| وضعية التركيب | اختياري، انظر معلومات التركيب | ||||||
| نطاق درجة حرارة البيئة | الحد الأدنى | ℃ | -20 | ||||
| الحد الأقصى | 50 | ||||||
| الوزن | m | kg | 55 | 75 | 106 | 114 | 212 |
| كتلة القصور الذاتي | J | كجم م2 | 0.016 | 0.016 | 0.045 | 0.045 | 0.146 |
الخصائص الهيدروليكية
| الضغط الاسمي (دورة عمل بنسبة 100٪) | PN | بار | 350 | |||||
| ضغط الإدخال | P1 دقيقة | بار | 0.85 مطلق | |||||
| P1 أقصى | بار | 50 | ||||||
| الضغط الأقصى وفقًا لـ DIN 24312 | p2 أقصى | بار | 420 | |||||
| السائل الهيدروليكي | زيت هيدروليكي وفقًا لDIN 51524 الجزء 2. يرجى الرجوع إلى قسم بيانات التطبيق - توصيات السوائل | |||||||
| نطاق درجة حرارة السائل الهيدروليكي | الحد الأدنى | ℃ | -25 (عند التشغيل) | |||||
| الحد الأقصى | 90 | |||||||
| نطاق اللزوجة للتشغيل المستمر | الحد الأدنى | سي إس تي | 10 | |||||
| الحد الأقصى | سي إس تي | 75 | ||||||
| الحد الأقصى المسموح به لزوجة البدء | الحد الأقصى | سي إس تي | 1000 | |||||
| التصفية | ISO 4406 | 18/15/13 | ||||||
| الحد الأقصى الهندسي | ن=1500 دورة في الدقيقة-1 | Vg | سم3 | 66 | 90 | 130 | 180 | 250 |
| الاسْتِهْلاك | ن=1800 دورة في الدقيقة-1 | |||||||
| الحد الأقصى الهندسي | ن=1500 دورة في الدقيقة-1 | Qg | لتر/دقيقة | 99 | 135 | 195 | 270 | 375 |
| تدفق المضخة | ن=1800 دورة في الدقيقة-1 | 118 | 162 | 234 | 324 | 450 | ||
| ضغط الحالة | pv الأقصى | بار | حد أقصى 0.5 بار فوق p1. pmax = 4 بار مطلق. | |||||
قيادة
| عزم القيادة الأقصى - وحدة واحدة (p2 أقصى. ,η= 100%) | Mواحدة فردية | لا شيء جديد | 440 | 600 | 868 | 1202 | 1671 |
| استهلاك الطاقة الأقصى - وحدة واحدة (p2 أقصى.,η=100٪؛ n=1800 دورة في الدقيقة-1) | Pواحدة فردية | كيلوواط | 69 | 94 | 136 | 189 | 265 |
| عزم القيادة الأقصى محدود فقط على العمود المسمح - الوحدة المجمعة | M1 وحدة تجمع. | لا شيء جديد | 2x440 | 2x600 | 2x868 | 2x1202 | 2x1671 |






-2.webp)
