PVXS Swashplate Variable Displacement Piston Pump

The PVXS variable displacement pump uses a swashplate axial piston design, as stated in the existing technical table. It should not be described as a bent-axis pump. The published model groups are 66, 90, 130, 180 and 250.

  • Swashplate axial piston design
  • Model sizes 66, 90, 130, 180 and 250
  • Flange or foot mounting listed
  • Tandem arrangement requires mounting and torque review

PRANCE HYDRAULIC · PRODUCT SERIES

PVXS Swashplate Variable Displacement Piston Pump

Axial piston; swashplate · Confirm the selected industrial circuit

The PVXS variable displacement pump uses a swashplate axial piston design, as stated in the existing technical table. It should not be described as a bent-axis pump. The published model groups are 66, 90, 130, 180 and 250.

Modèle

✓PVXS original product photograph
PVXSAxial piston; swashplate
Demander un devisVoir les données techniques et la fiche technique

Confirm the complete model and approved specification with Prance Hydraulic. Product-series references alone do not establish interchangeability.

Étude de configuration · Documentation technique · Sélection de produits

Détails du produit

  • Swashplate axial piston design
  • Model sizes 66, 90, 130, 180 and 250
  • Flange or foot mounting listed
  • Tandem arrangement requires mounting and torque review

CATÉGORIES : Pompe à cylindrée variable, Pompe à piston

PVXS Features & Application

Swashplate axial piston design

Specify the full MS order code, installation drawing and operating duty so the quotation can identify the proposed configuration.

Model sizes 66, 90, 130, 180 and 250

Include the series and all order-code suffixes in the enquiry. A common nominal size does not establish compatibility.

Flange or foot mounting listed

Check pilot diameter, bolt pattern, shaft engagement or port pattern against the approved installation drawing.

Tandem arrangement requires mounting and torque review

Check pilot diameter, bolt pattern, shaft engagement or port pattern against the approved installation drawing.

PVXS Specifications

Series / modelPVXS
Product typePVXS Swashplate Variable Displacement Piston Pump
ConceptionAxial piston; swashplate
Circuit / selectionConfirm the selected industrial circuit
Published model sizes66, 90, 130, 180 and 250
Pression nominale350 bar at 100% duty in the existing table
Maximum pressure420 bar; confirm permitted operating conditions
Published speed range150–1800 rpm; review the selected operating point

PVXS Selection & Configuration

The PVXS variable displacement pump uses a swashplate axial piston design, as stated in the existing technical table. It should not be described as a bent-axis pump. The published model groups are 66, 90, 130, 180 and 250.

For an industrial drive, distinguish nominal pressure from the maximum pressure and check the speed range at the required displacement. Tandem mounting also changes the installation and drive-torque review. Confirm the selected control, suction pressure and case-pressure allowance.

PVXS original product view

Your Application.
The Right Configuration.

Hydraulic pumps · Hydraulic motors · Hydraulic valves

Send the MS nameplate, operating requirements and installation drawing for a configuration review before quoting.

  • Model review — send the full model code or an existing nameplate photograph.
  • Interface matching — confirm shaft, mounting flange, rotation and ports.
  • Operating conditions — provide flow, pressure, speed, fluid and duty cycle.
  • Documentation — request the relevant product data and drawings for your review.
Prance workshop with a row of production equipment

PVXS Buying Guide

Use this sequence to prepare the MS configuration for review and quotation.

  1. Define required flow at the actual drive speed and continuous pressure.
  2. Identify peak pressure, duration and the work cycle.
  3. Confirm the selected displacement control and any auxiliary-drive requirement.
  4. Match rotation viewed from the shaft end, shaft, flange and ports.
  5. Review inlet conditions, drain routing and the installation envelope.
  6. Confirm fluid, viscosity, temperature, filtration and seals.
  7. Approve the complete model, control, drawing, quantity and delivery terms.
PVXS original product photograph for installation review

Selection, Documentation & Project Support

Prance technical team image from its company website

Selection Support

Learn more →

Share your hydraulic circuit, operating point and installation requirements for a configuration discussion.


Flow · Pressure · Speed · Interfaces
Prance quality standards image from its company website

Technical Resources

Learn more →

Review product documentation, model codes and technical data before finalizing the specification.


Datasheets · Model codes · Drawings
Prance sales team image from its company website

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

Learn more →

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.


cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

Configuration, Quantity & Delivery

Confirm the complete MS code, approved drawing and operating limits. Availability, quantity, documentation and delivery date are confirmed in the quotation.

Discuss Your PVXS Application

Send the full model code, operating duty, installation details and quantity.

Request a PVXS Quotation

PVXS Questions Before Ordering

What type of product is the PVXS?

PVXS Swashplate Variable Displacement Piston Pump. Design: Axial piston; swashplate. Confirm the selected industrial circuit. Confirm the complete order code for the offered version.

Can a similar pump replace the PVXS?

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

Define required flow at the actual drive speed and continuous pressure. Identify peak pressure, duration and the work cycle. Attach the nameplate, complete order code, installation drawing and required quantity.

PVXS Technical Data & Documents

View PVXS catalog data and operating conditions

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.

Données techniques

MODÈLE 66 90 130 180 250
Conception Swashplate – Axial piston pump
Type de montage Montage par bride ou par pied. La version tandem est uniquement montée sur pied
Raccord de tuyau par bride SAE B psi 1  1/2″=3000 2″=3000 2  1/2″=3000 2  1/2″=3000 3  1/2″=500
A 1″=6000 1″=6000 1″=6000 1  1/4″=6000 1  1/4″=6000
Sens de rotation Clockwise when viewing shaft end of pump Counterclockwise available on request
Plage de vitesse nmin tours par minute 150
nmax 1800
Position d'installation Optionnel, voir les informations de montage
Plage de température ambiante min ℉ -4
max 122
Poids m lb 121 165 234 251 467
Masse d'inertie J lb ft2 0.38 0.38 1.068 1.068 3.465

HYDRAULIQUE  CARACTÉRISTIQUES

Huile hydraulique Huile hydraulique selon DIN 51524 partie 2. Se référer à la section Données d'application - Recommandations sur le fluide
Plage de température de l'huile hydraulique min ℉ -13 (au démarrage)
max 194
Plage de viscosité pour un fonctionnement continu min CST 10
max CST 75
Viscosité maximale autorisée au démarrage max CST 1000
Filtration ISO 4406 18/15/13
Maximum géométrique n=1500rpm Vg in3 4.1 5.5 7.9 11 15.2
déplacement n=1800rpm
Maximum géométrique n=1500rpm Qg USg pm 26 36 52 71 99
débit de la pompe n=1800rpm 32 43 62 86 119
Pression du boîtier pv max psi max. 7,2 psi au-dessus de p1. Pmax = 58 abs.

CONDUITE

Maximum driving torque – single unit (p2 max. ,η= 100%) M1 Unique lb.ft 325 444 640 887 1233
Maximum power consumption – single unit (p2 max.,η=100%; n=1800 rpm) P1 Unique hp 93 126 182 254 355
Maximum driving torque limited to splined shaft only – comb. unit M1 Comb. lb.ft 2×325 2×444 cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
MODÈLE 66 90 130 180 250
Conception Swashplate – Axial piston pump
Type de montage Montage par bride ou par pied. La version tandem est uniquement montée sur pied
Raccord de tuyau par bride SAE B psi 1  1/2″=3000 2″=3000 2  1/2″=3000 2  1/2″=3000 3  1/2″=500
A 1″=6000 1″=6000 1″=6000 1  1/4″=6000 1  1/4″=6000
Sens de rotation Clockwise when viewing shaft end of pump Counterclockwise available on request
Plage de vitesse nmin min-1 150
nmax 1800
Position d'installation Optionnel, voir les informations de montage
Plage de température ambiante min ℃ -20
max 50
Poids m kg 55 75 106 114 212
Masse d'inertie J kg m2 0.016 0.016 0.045 0.045 0.146

CARACTÉRISTIQUES HYDRAULIQUES

Pression nominale (cycle de service 100%) PN bar 350
Pression d'entrée P1 min bar 0,85 absolu
P1 max bar 50
Pression maximale selon DIN 24312 p2 max bar 420
Huile hydraulique Huile hydraulique selon DIN 51524 partie 2. Se référer à la section Données d'application - Recommandations sur le fluide
Plage de température de l'huile hydraulique min ℃ -25 (au démarrage)
max 90
Plage de viscosité pour un fonctionnement continu min CST 10
max CST 75
Viscosité maximale autorisée au démarrage max CST 1000
Filtration ISO 4406 18/15/13
Maximum géométrique n=1500rpm-1 Vg cm3 66 90 130 180 250
déplacement n=1800rpm-1
Maximum géométrique n=1500rpm-1 Qg L/min 99 135 195 270 375
débit de la pompe n=1800rpm-1 118 162 234 324 450
Pression du boîtier pv max bar max.0,5 bar au-dessus de p1. pmax = 4 bar absolu.

CONDUITE

Maximum driving torque – single unit (p2 max. ,η= 100%) M1 Unique Rien 440 600 868 1202 1671
Maximum power consumption – single unit (p2 max.,η=100% ; n=1800 rpm-1) P1 Unique kW 69 94 136 189 265
Maximum driving torque limited to splined shaft only – comb. unit M1 Comb. Rien cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

Request a PVXS Quotation

Tell us your required configuration, quantity and application.

Démo du formulaire de contact
PVXS original product photograph

Données techniques

MODÈLE 66 90 130 180 250
Conception Plateau inclinable - Pompe à pistons axiaux
Type de montage Montage par bride ou par pied. La version tandem est uniquement montée sur pied
Raccord de tuyau par bride SAE B psi 1  1/2"=3000 2"=3000 2  1/2"=3000 2  1/2"=3000 3  1/2"=500
A 1"=6000 1"=6000 1"=6000 1  1/4"=6000 1  1/4"=6000
Sens de rotation Horaire lorsque l'on regarde l'extrémité de l'arbre de la pompe
Anti-horaire disponible sur demande
Plage de vitesse nmin tours par minute 150
nmax 1800
Position d'installation Optionnel, voir les informations de montage
Plage de température ambiante min ℉ -4
max 122
Poids m lb 121 165 234 251 467
Masse d'inertie J lb ft2 0.38 0.38 1.068 1.068 3.465

HYDRAULIQUE  CARACTÉRISTIQUES

Huile hydraulique Huile hydraulique selon DIN 51524 partie 2. Se référer à la section Données d'application - Recommandations sur le fluide
Plage de température de l'huile hydraulique min ℉ -13 (au démarrage)
max 194
Plage de viscosité pour un fonctionnement continu min CST 10
max CST 75
Viscosité maximale autorisée au démarrage max CST 1000
Filtration ISO 4406 18/15/13
Maximum géométrique n=1500rpm Vg in3 4.1 5.5 7.9 11 15.2
déplacement n=1800rpm
Maximum géométrique n=1500rpm Qg USg pm 26 36 52 71 99
débit de la pompe n=1800rpm 32 43 62 86 119
Pression du boîtier pv max psi max. 7,2 psi au-dessus de p1. Pmax = 58 abs.

CONDUITE

Couple de conduite maximal - unité unique (p2 max. ,η= 100%) M1 Unique lb.ft 325 444 640 887 1233
Consommation d'énergie maximale - unité unique (p2 max.,η=100%; n=1800 rpm) P1 Unique hp 93 126 182 254 355
Couple de rotation maximal limité à l'arbre à splines uniquement - unité combinée M1 Comb. lb.ft 2x325 2x444 2x640 2x887 2x1233
MODÈLE 66 90 130 180 250
Conception Plateau inclinable - Pompe à pistons axiaux
Type de montage Montage par bride ou par pied. La version tandem est uniquement montée sur pied
Raccord de tuyau par bride SAE B psi 1  1/2"=3000 2"=3000 2  1/2"=3000 2  1/2"=3000 3  1/2"=500
A 1"=6000 1"=6000 1"=6000 1  1/4"=6000 1  1/4"=6000
Sens de rotation Horaire lorsque l'on regarde l'extrémité de l'arbre de la pompe
Anti-horaire disponible sur demande
Plage de vitesse nmin min-1 150
nmax 1800
Position d'installation Optionnel, voir les informations de montage
Plage de température ambiante min ℃ -20
max 50
Poids m kg 55 75 106 114 212
Masse d'inertie J kg m2 0.016 0.016 0.045 0.045 0.146

CARACTÉRISTIQUES HYDRAULIQUES

Pression nominale (cycle de service 100%) PN bar 350
Pression d'entrée P1 min bar 0,85 absolu
P1 max bar 50
Pression maximale selon DIN 24312 p2 max bar 420
Huile hydraulique Huile hydraulique selon DIN 51524 partie 2. Se référer à la section Données d'application - Recommandations sur le fluide
Plage de température de l'huile hydraulique min ℃ -25 (au démarrage)
max 90
Plage de viscosité pour un fonctionnement continu min CST 10
max CST 75
Viscosité maximale autorisée au démarrage max CST 1000
Filtration ISO 4406 18/15/13
Maximum géométrique n=1500rpm-1 Vg cm3 66 90 130 180 250
déplacement n=1800rpm-1
Maximum géométrique n=1500rpm-1 Qg L/min 99 135 195 270 375
débit de la pompe n=1800rpm-1 118 162 234 324 450
Pression du boîtier pv max bar max.0,5 bar au-dessus de p1. pmax = 4 bar absolu.

CONDUITE

Couple de conduite maximal - unité unique (p2 max. ,η= 100%) M1 Unique Rien 440 600 868 1202 1671
Consommation d'énergie maximale - unité unique (p2 max.,η=100% ; n=1800 rpm-1) P1 Unique kW 69 94 136 189 265
Couple de rotation maximal limité à l'arbre à splines uniquement - unité combinée M1 Comb. Rien 2x440 2x600 2x868 2x1202 2x1671