PVXS Swashplate Variable Displacement Piston Pump

The PVXS variable displacement pump uses a swashplate axial piston design, as stated in the existing technical table. It should not be described as a bent-axis pump. The published model groups are 66, 90, 130, 180 and 250.

  • Swashplate axial piston design
  • Model sizes 66, 90, 130, 180 and 250
  • Flange or foot mounting listed
  • Tandem arrangement requires mounting and torque review

PRANCE HYDRAULIC · PRODUCT SERIES

PVXS Swashplate Variable Displacement Piston Pump

Axial piston; swashplate · Confirm the selected industrial circuit

The PVXS variable displacement pump uses a swashplate axial piston design, as stated in the existing technical table. It should not be described as a bent-axis pump. The published model groups are 66, 90, 130, 180 and 250.

Model

✓PVXS original product photograph
PVXSAxial piston; swashplate
Request a QuotationVer Datos Técnicos y Ficha Técnica

Confirm the complete model and approved specification with Prance Hydraulic. Product-series references alone do not establish interchangeability.

Configuration review · Technical documentation · Product selection

Detalles del producto

  • Swashplate axial piston design
  • Model sizes 66, 90, 130, 180 and 250
  • Flange or foot mounting listed
  • Tandem arrangement requires mounting and torque review

CATEGORIES: Bomba de desplazamiento variable, Bomba de pistón

PVXS Features & Application

Swashplate axial piston design

Specify the full MS order code, installation drawing and operating duty so the quotation can identify the proposed configuration.

Model sizes 66, 90, 130, 180 and 250

Include the series and all order-code suffixes in the enquiry. A common nominal size does not establish compatibility.

Flange or foot mounting listed

Check pilot diameter, bolt pattern, shaft engagement or port pattern against the approved installation drawing.

Tandem arrangement requires mounting and torque review

Check pilot diameter, bolt pattern, shaft engagement or port pattern against the approved installation drawing.

PVXS Specifications

Series / modelPVXS
Product typePVXS Swashplate Variable Displacement Piston Pump
DiseñoAxial piston; swashplate
Circuit / selectionConfirm the selected industrial circuit
Published model sizes66, 90, 130, 180 and 250
Presión nominal350 bar at 100% duty in the existing table
Presión máxima420 bar; confirm permitted operating conditions
Published speed range150–1800 rpm; review the selected operating point

PVXS Selection & Configuration

The PVXS variable displacement pump uses a swashplate axial piston design, as stated in the existing technical table. It should not be described as a bent-axis pump. The published model groups are 66, 90, 130, 180 and 250.

For an industrial drive, distinguish nominal pressure from the maximum pressure and check the speed range at the required displacement. Tandem mounting also changes the installation and drive-torque review. Confirm the selected control, suction pressure and case-pressure allowance.

PVXS original product view

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.

Hydraulic pumps · Hydraulic motors · Hydraulic valves

Send the MS nameplate, operating requirements and installation drawing for a configuration review before quoting.

  • Model review — send the full model code or an existing nameplate photograph.
  • Interface matching — confirm shaft, mounting flange, rotation and ports.
  • Operating conditions — provide flow, pressure, speed, fluid and duty cycle.
  • Documentation — request the relevant product data and drawings for your review.
Prance workshop with a row of production equipment

PVXS Buying Guide

Use this sequence to prepare the MS configuration for review and quotation.

  1. Define required flow at the actual drive speed and continuous pressure.
  2. Identify peak pressure, duration and the work cycle.
  3. Confirm the selected displacement control and any auxiliary-drive requirement.
  4. Match rotation viewed from the shaft end, shaft, flange and ports.
  5. Review inlet conditions, drain routing and the installation envelope.
  6. Confirm fluid, viscosity, temperature, filtration and seals.
  7. Approve the complete model, control, drawing, quantity and delivery terms.
PVXS original product photograph for installation review

Selection, Documentation & Project Support

Prance technical team image from its company website

Selection Support

Learn more →

Share your hydraulic circuit, operating point and installation requirements for a configuration discussion.


Flow · Pressure · Speed · Interfaces
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

Technical Resources

Learn more →

Review product documentation, model codes and technical data before finalizing the specification.


Datasheets · Model codes · Drawings
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

Project Inquiries

Learn more →

Send your required model, quantity, application and project requirements to discuss your inquiry.


Product inquiries · Configuration review

Configuration, Quantity & Delivery

Confirm the complete MS code, approved drawing and operating limits. Availability, quantity, documentation and delivery date are confirmed in the quotation.

Discuss Your PVXS Application

Send the full model code, operating duty, installation details and quantity.

Request a PVXS Quotation

PVXS Questions Before Ordering

What type of product is the PVXS?

PVXS Swashplate Variable Displacement Piston Pump. Design: Axial piston; swashplate. Confirm the selected industrial circuit. Confirm the complete order code for the offered version.

Can a similar pump replace the PVXS?

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

Define required flow at the actual drive speed and continuous pressure. Identify peak pressure, duration and the work cycle. Attach the nameplate, complete order code, installation drawing and required quantity.

PVXS Technical Data & Documents

View PVXS catalog data and operating conditions

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.

Datos técnicos

MODELO 66 90 130 180 250
Diseño Swashplate – Axial piston pump
Tipo de montaje Montaje por brida o patas. El tándem solo se monta por patas.
Conexión de tubería Brida SAE B psi 1  1/2″=3000 2″=3000 2  1/2″=3000 2  1/2″=3000 3  1/2″=500
A 1″=6000 1″=6000 1″=6000 1  1/4″=6000 1  1/4″=6000
Dirección de rotación Clockwise when viewing shaft end of pump Counterclockwise available on request
Rango de velocidad nmín rpm 150
nmáx 1800
Posición de instalación Opcional, ver información de montaje
Rango de temperatura ambiente mín ℉ -4
máx 122
Peso m lb 121 165 234 251 467
Masa de inercia J libras pies2 0.38 0.38 1.068 1.068 3.465

HIDRÁULICO  CARACTERÍSTICAS

Fluido hidráulico Aceite hidráulico según DIN 51524 parte 2. Consulte la sección Datos de aplicación - Recomendaciones de fluidos
Rango de temperatura del fluido hidráulico mín ℉ -13 (al iniciar)
máx 194
Rango de viscosidad para operación continua mín Huso horario central 10
máx Huso horario central 75
Viscosidad de arranque máxima permisible máx Huso horario central 1000
Filtrado ISO 4406 18/15/13
Geometría máxima n = 1500 rpm Vg en3 4.1 5.5 7.9 11 15.2
desplazamiento n=1800 rpm
Geometría máxima n = 1500 rpm Qg EE. UU.Buenas tardes 26 36 52 71 99
caudal de la bomba n=1800 rpm 32 43 62 86 119
Presión de la caja pv máx psi máx. 7.2 psi sobre p1. Pmáx = 58 abs.

CONDUCIR

Maximum driving torque – single unit (p2 máx. ,η = 100%) M1 Sencillo lb·ft 325 444 640 887 1233
Maximum power consumption – single unit (p2 máx.,η=100%; n=1800 rpm) P1 Sencillo hp 93 126 182 254 355
Maximum driving torque limited to splined shaft only – comb. unit M1 Pein. lb·ft 2×325 2×444 cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
MODELO 66 90 130 180 250
Diseño Swashplate – Axial piston pump
Tipo de montaje Montaje por brida o patas. El tándem solo se monta por patas.
Conexión de tubería Brida SAE B psi 1  1/2″=3000 2″=3000 2  1/2″=3000 2  1/2″=3000 3  1/2″=500
A 1″=6000 1″=6000 1″=6000 1  1/4″=6000 1  1/4″=6000
Dirección de rotación Clockwise when viewing shaft end of pump Counterclockwise available on request
Rango de velocidad nmín mín-1 150
nmáx 1800
Posición de instalación Opcional, ver información de montaje
Rango de temperatura ambiente mín ℃ -20
máx 50
Peso m kg 55 75 106 114 212
Masa de inercia J kg m2 0.016 0.016 0.045 0.045 0.146

CARACTERÍSTICAS HIDRÁULICAS

Presión nominal (ciclo de trabajo 100%) PN bar 350
Presión de entrada P1 min bar 0.85 abs
P1máx bar 50
Presión máxima según DIN 24312 p2máx bar 420
Fluido hidráulico Aceite hidráulico según DIN 51524 parte 2. Consulte la sección Datos de aplicación - Recomendaciones de fluidos
Rango de temperatura del fluido hidráulico mín ℃ -25 (al inicio)
máx 90
Rango de viscosidad para operación continua mín Huso horario central 10
máx Huso horario central 75
Viscosidad de arranque máxima permisible máx Huso horario central 1000
Filtrado ISO 4406 18/15/13
Geometría máxima n = 1500 rpm-1 Vg cm3 66 90 130 180 250
desplazamiento n=1800 rpm-1
Geometría máxima n = 1500 rpm-1 Qg L/min 99 135 195 270 375
caudal de la bomba n=1800 rpm-1 118 162 234 324 450
Presión de la caja pv máx bar máx. 0,5 bar sobre p1. pmax = 4 bar abs.

CONDUCIR

Maximum driving torque – single unit (p2 máx. ,η = 100%) M1 Sencillo Nm 440 600 868 1202 1671
Maximum power consumption – single unit (p2 máx.,η=100%; n=1800 rpm-1) P1 Sencillo kW 69 94 136 189 265
Maximum driving torque limited to splined shaft only – comb. unit M1 Pein. Nm cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

Request a PVXS Quotation

Tell us your required configuration, quantity and application.

Demostración de formulario de contacto
PVXS original product photograph

Datos técnicos

MODELO 66 90 130 180 250
Diseño Placa oscilante - Bomba de pistones axiales
Tipo de montaje Montaje por brida o patas. El tándem solo se monta por patas.
Conexión de tubería Brida SAE B psi 1  1/2"=3000 2"=3000 2  1/2"=3000 2  1/2"=3000 3  1/2"=500
A 1"=6000 1"=6000 1"=6000 1  1/4"=6000 1  1/4"=6000
Dirección de rotación En el sentido de las agujas del reloj al mirar el extremo del eje de la bomba
En sentido antihorario disponible bajo petición
Rango de velocidad nmín rpm 150
nmáx 1800
Posición de instalación Opcional, ver información de montaje
Rango de temperatura ambiente mín ℉ -4
máx 122
Peso m lb 121 165 234 251 467
Masa de inercia J libras pies2 0.38 0.38 1.068 1.068 3.465

HIDRÁULICO  CARACTERÍSTICAS

Fluido hidráulico Aceite hidráulico según DIN 51524 parte 2. Consulte la sección Datos de aplicación - Recomendaciones de fluidos
Rango de temperatura del fluido hidráulico mín ℉ -13 (al iniciar)
máx 194
Rango de viscosidad para operación continua mín Huso horario central 10
máx Huso horario central 75
Viscosidad de arranque máxima permisible máx Huso horario central 1000
Filtrado ISO 4406 18/15/13
Geometría máxima n = 1500 rpm Vg en3 4.1 5.5 7.9 11 15.2
desplazamiento n=1800 rpm
Geometría máxima n = 1500 rpm Qg EE. UU.Buenas tardes 26 36 52 71 99
caudal de la bomba n=1800 rpm 32 43 62 86 119
Presión de la caja pv máx psi máx. 7.2 psi sobre p1. Pmáx = 58 abs.

CONDUCIR

Par de giro máximo - unidad simple (p2 máx. ,η = 100%) M1 Sencillo lb·ft 325 444 640 887 1233
Consumo máximo de energía - unidad individual2 máx.,η=100%; n=1800 rpm) P1 Sencillo hp 93 126 182 254 355
Par de giro máximo limitado únicamente al eje estriado - unid. comb. M1 Pein. lb·ft 2x325 2x444 2x640 2x887 2x1233
MODELO 66 90 130 180 250
Diseño Placa oscilante - Bomba de pistones axiales
Tipo de montaje Montaje por brida o patas. El tándem solo se monta por patas.
Conexión de tubería Brida SAE B psi 1  1/2"=3000 2"=3000 2  1/2"=3000 2  1/2"=3000 3  1/2"=500
A 1"=6000 1"=6000 1"=6000 1  1/4"=6000 1  1/4"=6000
Dirección de rotación En el sentido de las agujas del reloj al mirar el extremo del eje de la bomba
En sentido antihorario disponible bajo petición
Rango de velocidad nmín mín-1 150
nmáx 1800
Posición de instalación Opcional, ver información de montaje
Rango de temperatura ambiente mín ℃ -20
máx 50
Peso m kg 55 75 106 114 212
Masa de inercia J kg m2 0.016 0.016 0.045 0.045 0.146

CARACTERÍSTICAS HIDRÁULICAS

Presión nominal (ciclo de trabajo 100%) PN bar 350
Presión de entrada P1 min bar 0.85 abs
P1máx bar 50
Presión máxima según DIN 24312 p2máx bar 420
Fluido hidráulico Aceite hidráulico según DIN 51524 parte 2. Consulte la sección Datos de aplicación - Recomendaciones de fluidos
Rango de temperatura del fluido hidráulico mín ℃ -25 (al inicio)
máx 90
Rango de viscosidad para operación continua mín Huso horario central 10
máx Huso horario central 75
Viscosidad de arranque máxima permisible máx Huso horario central 1000
Filtrado ISO 4406 18/15/13
Geometría máxima n = 1500 rpm-1 Vg cm3 66 90 130 180 250
desplazamiento n=1800 rpm-1
Geometría máxima n = 1500 rpm-1 Qg L/min 99 135 195 270 375
caudal de la bomba n=1800 rpm-1 118 162 234 324 450
Presión de la caja pv máx bar máx. 0,5 bar sobre p1. pmax = 4 bar abs.

CONDUCIR

Par de giro máximo - unidad simple (p2 máx. ,η = 100%) M1 Sencillo Nm 440 600 868 1202 1671
Consumo máximo de energía - unidad individual2 máx.,η=100%; n=1800 rpm-1) P1 Sencillo kW 69 94 136 189 265
Par de giro máximo limitado únicamente al eje estriado - unid. comb. M1 Pein. Nm 2x440 2x600 2x868 2x1202 2x1671