A6VM Variable Displacement Bent Axis Motor

The A6VM variable displacement bent-axis motor is selected around the required torque-speed envelope and control behavior. Its available displacement settings can cover different operating points, but each setting remains subject to pressure, speed and duty limits.

  • Moteur à axe incliné à déploiement variable
  • Multiple displacement-control arrangements
  • Flushing and boost valve options
  • Counterbalance configuration must be specified

PRANCE HYDRAULIC · PRODUCT SERIES

A6VM Variable Displacement Bent Axis Motor

Axial piston; bent axis, variable displacement · Confirm open or closed circuit configuration

The A6VM variable displacement bent-axis motor is selected around the required torque-speed envelope and control behavior. Its available displacement settings can cover different operating points, but each setting remains subject to pressure, speed and duty limits.

Modèle

✓A6VM original product photograph
A6VMAxial piston; bent axis, variable displacement
Demander un devisVoir les données techniques et la fiche technique

Confirm the complete model and approved specification with Prance Hydraulic. Product-series references alone do not establish interchangeability.

Étude de configuration · Documentation technique · Sélection de produits

Détails du produit

  • Moteur à axe incliné à déploiement variable
  • Multiple displacement-control arrangements
  • Flushing and boost valve options
  • Counterbalance configuration must be specified

CATÉGORIES : Moteur à pistons, Moteur à pistons à cylindrée variable

A6VM Features & Application

Moteur à axe incliné à déploiement variable

Specify the displacement range or switching arrangement and verify performance at each required setting.

Multiple displacement-control arrangements

Match the complete control option and its command requirements to the existing controller. Similar housings can use different control arrangements.

Flushing and boost valve options

Account for pilot or replenishment demand and the relevant pressure limits. Include filtration and the return or drain route in the circuit review.

Counterbalance configuration must be specified

Specify the full MS order code, installation drawing and operating duty so the quotation can identify the proposed configuration.

A6VM Specifications

Series / modelA6VM
Product typeA6VM Variable Displacement Bent Axis Motor
ConceptionAxial piston; bent axis, variable displacement
Circuit / selectionConfirm open or closed circuit configuration
Published technical-table sizes28, 55, 80, 107, 140 and 160
Displacement and controlMatch size and control to the exact offered configuration

A6VM Selection & Configuration

The A6VM variable displacement bent-axis motor is selected around the required torque-speed envelope and control behavior. Its available displacement settings can cover different operating points, but each setting remains subject to pressure, speed and duty limits.

Compare starting, continuous and high-speed duty separately. Provide the control type and desired displacement on loss of command or pilot pressure. Confirm whether flushing, boost or counterbalance components are included rather than inferring them from the product photograph.

A6VM original product view

Your Application.
The Right Configuration.

Hydraulic pumps · Hydraulic motors · Hydraulic valves

Send the MS nameplate, operating requirements and installation drawing for a configuration review before quoting.

  • Model review — send the full model code or an existing nameplate photograph.
  • Interface matching — confirm shaft, mounting flange, rotation and ports.
  • Operating conditions — provide flow, pressure, speed, fluid and duty cycle.
  • Documentation — request the relevant product data and drawings for your review.
Prance workshop with a row of production equipment

A6VM Buying Guide

Use this sequence to prepare the A6VM configuration for review and quotation.

  1. Define starting and continuous torque, speed range and duty cycle.
  2. Specify available flow, work-port pressure difference and return pressure.
  3. Confirm the displacement setting and required behavior during starting and stopping.
  4. Check shaft, mounting pilot, flange, port orientation and external loads.
  5. Review case drainage, replenishment and any displacement control.
  6. Specify fluid conditions and any independent braking requirement.
  7. Approve the complete model, operating envelope, drawing and quantity.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

Selection, Documentation & Project Support

Prance technical team image from its company website

Selection Support

Learn more →

Share your hydraulic circuit, operating point and installation requirements for a configuration discussion.


Flow · Pressure · Speed · Interfaces
Prance quality standards image from its company website

Technical Resources

Learn more →

Review product documentation, model codes and technical data before finalizing the specification.


Datasheets · Model codes · Drawings
Prance sales team image from its company website

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

Learn more →

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.


cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

Configuration, Quantity & Delivery

Confirm the complete MS code, approved drawing and operating limits. Availability, quantity, documentation and delivery date are confirmed in the quotation.

Discuss Your A6VM Application

Send the full model code, operating duty, installation details and quantity.

Request a A6VM Quotation

A6VM Questions Before Ordering

What type of product is the A6VM?

AA6VM Variable Displacement Bent Axis Motor. Design: Axial piston; bent axis, variable displacement. Confirm open or closed circuit configuration. Confirm the complete order code for the offered version.

Can a similar motor replace the A6VM?

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.

A6VM Technical Data & Documents

View A6VM catalog data and operating conditions

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.

Données techniques

Taille NG 28 55 80 107 140 160
Déplacement géométrique, par révolution1) VGmax cm3 28.1 54.8 80 107 140 160
Vgmin cm3 0 0 0 0 0 0
Vgx cm3 18 35 51 68 88 61
Vitesse de rotation maximale2)(tout en respectant le débit d'entrée maximal admissible) à VGmax nnom tours par minute 5550 4450 3900 3550 3250 3100
à Vg<Vgx nmax tours par minute 8750 7000 6150 5600 5150 4900
where Vgo nmax tours par minute 10450 8350 7350 6300 5750 5500
Débit d'entrée3) at nnom and VGmax qvmax l/min 156 244 312 380 455 496
Couple4) à VGmax and Δp=400bar T Rien 179 349 509 681 891 1019
à VGmax and Δp= 350bar T Rien 157 305 446 596 778 891
Rigidité rotative VGmax vers Vg/2 cmin kNm/rad 6 10 16 21 34 35
Vg/2 to 0 (interpolated) cmin kNm/rad 18 32 48 65 93 105
Moment d'inertie pour le groupe rotatif JTW kgm2 0.0014 0.0042 0.008 0.127 0.0207 0.0253
Accélération angulaire maximale α rad/s2 47000 31500 24000 19000 11000 11000
Volume du boîtier V l 0.5 0.75 1.2 1.5 1.8 2.4
Poids approx. m kg 16 28 36 46 61 62
Taille NG 200 250 355 500 1000
Déplacement géométrique, par révolution1) VGmax cm3 200 250 355 500 1000
Vgmin cm3 0 0 0 0 0
Vgx cm3 76 205 300 417 1000
Vitesse de rotation maximale2)(tout en respectant le débit d'entrée maximal admissible) à VGmax nnom tours par minute 2900 2700 2240 2000 1600
à Vg<Vgx nmax tours par minute 4600 3300 2650 2400 1600
where Vgo nmax tours par minute 5100 3300 2650 2400 1600
Débit d'entrée3) at nnom and VGmax qvmax l/min 580 675 795 1000 1600
Couple4) à VGmax and Δp=400bar T Rien 1273 - - - -
à VGmax and Δp= 350bar T Rien 1114 1391 1978 2785 5571
Rigidité rotative VGmax vers Vg/2 cmin kNm/rad 44 60 75 115 281
Vg/2 to 0 (interpolated) cmin kNm/rad 130 181 262 391 820
Moment d'inertie pour le groupe rotatif JTW kgm2 0.0353 0.061 0.102 0.178 0.55
Accélération angulaire maximale α rad/s2 11000 10000 8300 5500 4000
Volume du boîtier V l 2.7 3.00 5.0 7.0 16.0
Poids approx. m kg 78 100 170 210 430

Plage de vitesse

La vitesse de rotation minimale nmin is not restricted. Please consult us regarding applications requiring uniformity of the rotatory motion at low speeds. 1)The minimum and maximum displacement can be steplessly adjusted,(standard setting for sizes 250 to 1000 if ordering code is missing.Vgmin =0.2×Vgmax, VGiga = Vgmonx) 2) The values are applicable: -for the optimum viscosity range from Vopt=36 to 16 mm2/s -with hydraulic fluid based on mineral oils 3)Observe limitation of displacement due to counterbalance valve 4) Torque without radial force, with radial force.

Avis

▶Theoretical values, without efficiency and tolerances;values rounded ▶Operation above the maximum values or below the minimum Values may result in a loss of function, a reducd service life or in the destruction of the axial piston unit. Other permissible limit values, such as speed variation, reduced angular acceleration as a function of the frequency and the permissible angular acceleration at start (lower than the maximum angular acceleration) can be found in data sheet 90261.

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
Définir les caractéristiques de fonctionnement
Débit d'entrée qv=(Vg×n)/(1000×ηv) cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
Vitesse de rotation n=(qv×1000×ηv)/Vg [rpm]
Couple T=(Vg×Δp×ηhm)/(20×π) [Nm]
Puissance P=(2π×T×n)/60000=(qv×Δp×ηt)/600 [kW]

Clé

Vg=Cylindrée par tour [cm3] Δp=Differential pressure [bar] n=Rotational speed [rpm] ηv=Volumetric efficiency ηhm=Hydraulic-mechanical efficiency ηtcURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limitst=nv cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limitshm)
Watch A6VM Product Video
A6VM product video

Request a A6VM Quotation

Tell us your required configuration, quantity and application.

Démo du formulaire de contact
A6VM original product photograph

Code source

01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20
A6V M / 63 W - V -

Huile hydraulique

01 Mineral oil and HFD. HFD for sizes 250 to 1000 only in conjunction with long-life bearing "L"(without code)
HFB, HFC hydraulic fluid Size 28 to 200 (without code)
Sizes 250 to 1000(only in conjunction with long-life bearings"L") E

Unité à pistons axiaux

02 Conception à axe incliné, variable A6V

Roulement d'arbre de transmission

28...200 250 355 500 1000
03 Standard bearings (without code) ● ● ● ● -
Long-life bearings - ● ● ● ● L

Mode de fonctionnement

04 Motor (plug-in motor A6VE, see data sheet 91606) M

Taille (NG)

05 Déplacement géométrique 28 55 80 107 140 160 200 250 355 500 1000

Dispositif de commande1)

06 Contrôle proportionnel, hydraulique Δpst =10 bar ● ● ● ● ● ● ● ● ● ● ● HD1
Δpst =25 bar ● ● ● ● ● ● ● ● ● ● ● HD2
Δpst =35 bar - - - - - - - ● ● ● ● HD3
Commande proportionnelle, électrique U=12V ● ● ● ● ● ● ● ● ● ● ● EP1
U=24V ● ● ● ● ● ● ● ● ● ● ● EP2
Two-point control, hydraulic - - - - - - - ● ● ● ● HZ
● - - - ● ● ● - - - - HZ1
- ● ● ● - - - - - - - HZ3
Régulation à deux points, électrique U=12V ● - - - ● ● ● ● ● ● ● EZ1
U=24V ● - - - ● ● ● ● ● ● ● EZ2
U=12V - ● ● ● - - - - - - - EZ3
U=24V - ● ● ● - - - - - - - EZ4
Automatic control,

lié à la haute pression

With minimum pressure increase

Δp≤approx.10 bar

With pressure increase Δp= 100bar

● ● ● ● ● ● ● ● ● ● ● HA1
● ● ● ● ● ● ● ● ● ● ● HA2
Commande automatique, liée à la vitesse

pst/pHD=3/100 Hydraulic travel direction valve

- - - - - - - ● ● ● ○ DA
pst/pHD=5/100 Hydraulic travel direction valve ● ● ● ● ● ● ● - - - - DA1
Electric travel direction valve+

electric Vg monx circuit

U=12V ● ● ● ● ● ● ● - - - - DA2
U=24V ● ● ● ● ● ● ● - - - - DA3
pst/pHD=8/100 Hydraulic travel direction valve ● ● ● ● ● ● ● - - - - DA4
Electric travel direction valve+

electric Vg monx circuit

U=12V ● ● ● ● ● ● ● - - - - DA5
U=24V ● ● ● ● ● ● ● - - - - DA6
28 55 80 107 140 160 200 250 355 500 1000
07 Sans contrôle/override de pression ● ● ● ● ● ● ● ● ● ● ●
Contrôle de la pression réglage fixe ● ● ● ● ● ● ● ● ● ● ● D
Hydraulic override, two-point ● ● ● ● ● ● ● 2) 2) 2) 2) E
Hydraulic remote control, proportional - - - - - - - ● ● ● ● G

•=Available       ○= On request        - =Not available

1)Specify response time damping when ordering (sizes 28 to 200)

2) 2nd pressure setting fitted as standard with Version D (sizes 250 to 1000)

Overrides pour les commandes HA1 et HA2

28 55 80 107 140 160 200 250 355 500 1000
08 Without override (without code) ● ● ● ● ● ● ● ● ● ● ●
Hydraulic override, remote control, proportional ● ● ● ● ● ● ● ● ● ● ● T
Remote control electric override, two-point U=12V ● ● ● ● ● ● ● - - - - U1
U=24V ● ● ● ● ● ● ● - - - - U2
Electric override U=12V ● ● ● ● ● ● ● - - - - R1
+travel direction valve, electric U=24V ● ● ● ● ● ● ● - - - - R2

Séries

09 Série 6, index 3 63

Sens de rotation

10 Vue sur l'arbre de transmission, bidirectionnel W

Setting ranges for displacement3)

28 55 80 107 140 160 200 250 355 500 1000
11 Vgmin = 0 to 0.7 VGmax ● ● ● ● ● ● ● - - - -
Vgmin =0 à 0,4 VGmax          VGmax =VGmax jusqu'à 0,8 VGmax - - - - - - - ● ● ● ● 1
Vgmin > 0,4 VGmax jusqu'à 0,8 VGmax          VGmax =VGmax jusqu'à 0,8 VGmax - - - - - - - ● ● ● ● 2

Matériau d'étanchéité

12 FKM (fluoroélastomère) V

Arbre de transmission

28 55 80 107 140 160 200 250 355 500 1000
13 Arbre à splines DIN 5480 ● ● ● ● ● ● ● - - - - A
● ● ● ● ● ● - ● ● ● ● Z
Parallel keyed shaft DIN 6885 - - - - - - - ● ● ● ● P

Bride de fixation

28 55 80 107 140 160 200 250 355 500 1000
14 cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits à 4 trous ● ● ● ● ● ● ● ● - - -
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits - - - - - - - - ● ● ●

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits4)

28 55 80 107 140 160 200 250 355 500 1000
15 Ports de travail SAE A et B à l'arrière 01 0 ● ● ● ● ● ● ● ● ● ● ● 010
7 ● ● ● ● ● ● ● ● ● ● ● 017
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits 02 0 ● ● ● ● ● ● ● ● ● ● ● 020
7 ● ● ● ● ● ● ● ● ● ● ● 027
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits 15 0 - - - - - - - ● ● ● ● 150
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits5) cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits 37 0 - - - ● - - - - - - - 370
8 - - - ● - - - - - - - 378
for BVD20/BVD25 38 0 - ● ● ● ● ● ● ●6) - - - 380
8 - ● ● ● ● ● ● ●6) - - - 388
for BVE 38 0 - - - ● ● ● ● - - - - 380
8 - - - ● ● ● ● - - - - 388

0=Without valve

7=Flushing and boost-pressure valve, mounted

8=Counterbalance valve mounted7)

•=Available       ○= On request        - =Not available

3)Please specify exact settings for Vgmin and VGmax in plain text when ordering:Vgmin=...cm3,VGmax=...cm3

4) Fastening thread,metric

3) Possible uniquement en combinaison avec le contrôle HD, EP et HA

6) Type code for counterbalance valve to be quoted separately in accordance with data sheet 95522- BVD or 95525-BVE.

7) Counterbalance valve MHB32,please contact us.

Capteur de vitesse

28 55 80 107 140 160 200 250 355 500 10008)
16 Sans capteur de vitesse (sans code) ● ● ● ● ● ● ● ● ● ● ● O
Préparé pour capteur de vitesse HDD ▲ ▲ ▲ ▲ ▲ ▲ ▲ ● ● ● - F
Capteur de vitesse HDD monté9) ▲ ▲ ▲ ▲ ▲ ▲ ▲ ● ● ● - H
Prepared for DSM/DSA speed sensor ● ● ● ● ● ● ● - - - - U
DSM/DSA speed sensor mounted9) ● ● ● ● ● ● ● - - - - V

Swivel angel sensor

28 55 80 107 140 160 200 250 355 500 1000
17 Without swivel angle sensor ● ● ● ● ● ● ● ● ● ● -
Capteur optique d'angle de rotation - - - - - - - ● ● ● ● V
Capteur électrique d'angle de rotation - - - - - - - ● ● ● ● E

Connecteur pour solénoïdes

28 to 200 250 to 1000
18 Without connector (without solenoid, with hydraulic control only)(sizes 250 to 1000) ● - O
- ●
DEUTSCH molded connector, 2-pin-without suppressor diode ● - P
HIRSCHMANN connector-without suppressor diode - ●

Début du contrôle

28 55 80 107 140 160 200 250 355 500 1000
19 At  Vgmin (standard pour HA) ● ● ● ● ● ● ● ● ● ● ● A
À VGmax(standard pour HD, HZ, EP, EZ, DA) ● ● ● ● ● ● ● ● ● ● ● B

Standard/special version

20 Version standard
Version standard avec variantes d'installation, par ex. ports T ouverts ou fermés, contrairement à la norme -Y
Specialversion -S

•=Available       ○= On request      ▲=Not for new projects      - =Not available

Avis

En plus du code type, veuillez spécifier les données techniques pertinentes lors de votre commande.

8) Please contact us.

9) Specify type code separately for sensor in accordance with data sheet 95132-DSM or 95133-DSA,95135-HDD and observe the requirements for the electronics.

Données techniques

Taille NG 28 55 80 107 140 160
Déplacement géométrique, par révolution1) VGmax cm3 28.1 54.8 80 107 140 160
Vgmin cm3 0 0 0 0 0 0
Vgx cm3 18 35 51 68 88 61
Vitesse de rotation maximale2)(tout en respectant le débit d'entrée maximal admissible) à VGmax nnom tours par minute 5550 4450 3900 3550 3250 3100
à Vg<Vgx nmax tours par minute 8750 7000 6150 5600 5150 4900
where Vgo nmax tours par minute 10450 8350 7350 6300 5750 5500
Débit d'entrée3) at nnom and VGmax qvmax l/min 156 244 312 380 455 496
Couple4) à VGmax and Δp=400bar T Rien 179 349 509 681 891 1019
à VGmax and Δp= 350bar T Rien 157 305 446 596 778 891
Rigidité rotative VGmax vers Vg/2 cmin kNm/rad 6 10 16 21 34 35
Vg/2 to 0 (interpolated) cmin kNm/rad 18 32 48 65 93 105
Moment d'inertie pour le groupe rotatif JTW kgm2 0.0014 0.0042 0.008 0.127 0.0207 0.0253
Accélération angulaire maximale α rad/s2 47000 31500 24000 19000 11000 11000
Volume du boîtier V l 0.5 0.75 1.2 1.5 1.8 2.4
Poids approx. m kg 16 28 36 46 61 62
Taille NG 200 250 355 500 1000
Déplacement géométrique, par révolution1) VGmax cm3 200 250 355 500 1000
Vgmin cm3 0 0 0 0 0
Vgx cm3 76 205 300 417 1000
Vitesse de rotation maximale2)(tout en respectant le débit d'entrée maximal admissible) à VGmax nnom tours par minute 2900 2700 2240 2000 1600
à Vg<Vgx nmax tours par minute 4600 3300 2650 2400 1600
where Vgo nmax tours par minute 5100 3300 2650 2400 1600
Débit d'entrée3) at nnom and VGmax qvmax l/min 580 675 795 1000 1600
Couple4) à VGmax and Δp=400bar T Rien 1273 - - - -
à VGmax and Δp= 350bar T Rien 1114 1391 1978 2785 5571
Rigidité rotative VGmax vers Vg/2 cmin kNm/rad 44 60 75 115 281
Vg/2 to 0 (interpolated) cmin kNm/rad 130 181 262 391 820
Moment d'inertie pour le groupe rotatif JTW kgm2 0.0353 0.061 0.102 0.178 0.55
Accélération angulaire maximale α rad/s2 11000 10000 8300 5500 4000
Volume du boîtier V l 2.7 3.00 5.0 7.0 16.0
Poids approx. m kg 78 100 170 210 430

Plage de vitesse

La vitesse de rotation minimale nmin n'est pas limitée. Veuillez nous consulter concernant les applications nécessitant une uniformité du mouvement rotatif à basse vitesse.

1)The minimum and maximum displacement can be steplessly adjusted,(standard setting for sizes 250 to 1000 if ordering code is missing.Vgmin =0.2×Vgmax, VGiga = Vgmonx)

2) Les valeurs sont applicables :

-for the optimum viscosity range from Vopt=36 to 16 mm2/s

-with hydraulic fluid based on mineral oils

3)Observe limitation of displacement due to counterbalance valve

4) Torque without radial force, with radial force.

Avis

▶Valeurs théoriques, sans efficacité ni tolérances ; valeurs arrondies

▶Une opération au-dessus des valeurs maximales ou en dessous des valeurs minimales peut entraîner une perte de fonction, une durée de vie réduite ou la destruction de l'unité de piston axial. D'autres valeurs limites admissibles, telles que la variation de vitesse, l'accélération angulaire réduite en fonction de la fréquence et l'accélération angulaire admissible au démarrage (inférieure à l'accélération angulaire maximale) peuvent être trouvées dans la fiche technique 90261.

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

Définir les caractéristiques de fonctionnement
Débit d'entrée qv=(Vg×n)/(1000×ηv) cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
Vitesse de rotation n=(qv×1000×ηv)/Vg [rpm]
Couple T=(Vg×Δp×ηhm)/(20×π) [Nm]
Puissance P=(2π×T×n)/60000=(qv×Δp×ηt)/600 [kW]

Clé

Vg=Cylindrée par tour [cm3]

Δp=Pression différentielle [bar]

n=Vitesse de rotation [rpm]

ηv=Rendement volumétrique

ηhm=Rendement hydraulique-mécanique

ηtcURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limitst=nv cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limitshm)

A6VM