Wenzhou Prance Hydraulic Equipment Co., Ltd.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
The 4WRAE proportional valve controls hydraulic direction and flow by direct actuation. The series table includes both WRA and WRAE versions; the WRAE integrated-electronics data must be used when matching the controller and connector.
- Direct actuation
- Spring-centered control spool
- Integrated electronics for WRAE variant
- Subplate mounting
PRANCE HYDRAULIC · PRODUCT SERIES
Direct-operated proportional directional valve · Subplate-mounted direction and flow control
The 4WRAE proportional valve controls hydraulic direction and flow by direct actuation. The series table includes both WRA and WRAE versions; the WRAE integrated-electronics data must be used when matching the controller and connector.
Model

Confirm the complete model and approved specification with Prance Hydraulic. Product-series references alone do not establish interchangeability.
Configuration review · Technical documentation · Product selection
Detalles del producto
- Direct actuation
- Spring-centered control spool
- Integrated electronics for WRAE variant
- Subplate mounting
CATEGORIES: Válvula hidráulica, Válvula proporcional
4WRAE Features & Application
Direct actuation
Specify the full MS order code, installation drawing and operating duty so the quotation can identify the proposed configuration.
Spring-centered control spool
Match the complete control option and its command requirements to the existing controller. Similar housings can use different control arrangements.
Integrated electronics for WRAE variant
Match the complete control option and its command requirements to the existing controller. Similar housings can use different control arrangements.
Subplate mounting
Check pilot diameter, bolt pattern, shaft engagement or port pattern against the approved installation drawing.
4WRAE Specifications
| Series / model | 4WRAE |
|---|---|
| Product type | cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits |
| Diseño | Direct-operated proportional directional valve |
| Circuit / selection | Subplate-mounted direction and flow control |
| Published nominal sizes | 6 and 10 |
| Listed WRAE command variants | A1: ±10 V; F1: 4–20 mA |
| Rated-flow test condition | Δp = 10 bar in the existing technical table |
4WRAE Selection & Configuration
The 4WRAE proportional valve controls hydraulic direction and flow by direct actuation. The series table includes both WRA and WRAE versions; the WRAE integrated-electronics data must be used when matching the controller and connector.
Confirm nominal size, spool characteristic and command input before choosing a rated flow. Rated flow is given at a specified pressure drop and is different from maximum permissible flow. Keep the WRA and WRAE electrical data separate during comparison.

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
Hydraulic pumps · Hydraulic motors · Hydraulic valves
Send the MS nameplate, operating requirements and installation drawing for a configuration review before quoting.
- Model review — send the full model code or an existing nameplate photograph.
- Interface matching — confirm shaft, mounting flange, rotation and ports.
- Operating conditions — provide flow, pressure, speed, fluid and duty cycle.
- Documentation — request the relevant product data and drawings for your review.

4WRAE Buying Guide
Use this sequence to prepare the 4WRAE configuration for review and quotation.
- Select the circuit symbol and required de-energized spool position.
- State working flow, pressure and the pressure-drop condition for rated flow.
- Review spool overlap and command behavior during startup and switch-off.
- Confirm nominal size, subplate pattern, port and seal requirements.
- Match supply voltage, command input, connector and pin assignment.
- Review pilot supply, drain and feedback where the selected valve uses them.
- Approve the exact valve code, circuit drawing, quantity and documentation.

Selection, Documentation & Project Support

Selection Support
Learn more →Share your hydraulic circuit, operating point and installation requirements for a configuration discussion.
Flow · Pressure · Speed · Interfaces

Technical Resources
Learn more →Review product documentation, model codes and technical data before finalizing the specification.
Datasheets · Model codes · Drawings

Project Inquiries
Learn more →Send your required model, quantity, application and project requirements to discuss your inquiry.
Product inquiries · Configuration review
Configuration, Quantity & Delivery
Confirm the complete MS code, approved drawing and operating limits. Availability, quantity, documentation and delivery date are confirmed in the quotation.
Discuss Your 4WRAE Application
Send the full model code, operating duty, installation details and quantity.
Request a 4WRAE Quotation4WRAE Questions Before Ordering
What type of product is the 4WRAE?
4WRAE Direct Operated Proportional Valve. Design: Direct-operated proportional directional valve. Subplate-mounted direction and flow control. Confirm the complete order code for the offered version.
Can a similar valve replace the 4WRAE?
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
Select the circuit symbol and required de-energized spool position. State working flow, pressure and the pressure-drop condition for rated flow. Attach the nameplate, complete order code, installation drawing and required quantity.
4WRAE Technical Data & Documents
View 4WRAE catalog data and operating conditions
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
Datos técnicos
(para aplicaciones fuera de estos parámetros, ¡consúltenos!)General
| Tamaño nominal | NS | 6 | 10 | |
| Instalación | opcional, preferiblemente horizontal | |||
| Rango de temperatura de almacenamiento | ℃ | -20 a +80 | ||
| Ambiente | 4WRA | ℃ | -20 a +70 | |
| rango de temperatura | 4WRAE | ℃ | -20 a +50 | |
| Peso | 4WRA | kg | 2.0 | 6.6 |
| 4WRAE | kg | 2.2 | 6.8 | |
| Hidráulico (medido con HLP46, Θaceite= 40 ℃±5 ℃) | ||||
| Presión máx. de servicio | Puertos A, B, P | bar | 315 | |
| Puerto T | bar | 210 | ||
| Caudal nominal qV nom a Δp=10 bar | l/min | 7,15,26 | 30,60 | |
| Flujo máximo permisible | l/min | 42 (80)1) | 75 (140)1) | |
| Fluido a presión | mineral oil (HL, HLP) to DIN 51524 other pressure fluids on request! | |||
| Rango de temperatura del fluido a presión | ℃ | -20 a +80 (preferiblemente de +40 a +50) | ||
| Rango de viscosidad | mm2/s | 20 a 380 (preferiblemente 30 a 46) | ||
| Grado máximo admisible de contaminación del fluido a presión, clase de limpieza según ISO 4406 (c) | clase 20/18/15 2) | |||
| Histéresis | % | ≤ 5 | ||
| Error de inversión | % | ≤ 1 | ||
| Sensibilidad de respuesta | % | ≤ 0.5 | ||
Eléctrico
| Tamaño nominal | NS | 6 | 10 | |
| Tipo de voltaje | DC | |||
| Valor del comando signa | Voltage input “A1” | V | ±10 | |
| con tipo WRAE | Current input “F1” | mA | 4 a 20 | |
| Corriente máx. por solenoide | A | 2.5 | ||
| Bobina de solenoide | Valor en frío a 20 ℃ | Ω | 2 | |
| resistencia | Valor máximo de calor | Ω | 3 | |
| Deber | % | 100 | ||
| Temperatura máx. de la bobina 1) | ℃ | 150 | ||
| Electrical connections see page 7 | 4WRA | con conector de enchufe según DIN EN 175301-803 o ISO 4400 | ||
| conector enchufable según DIN EN 175301-803 o ISO 4400 2) | ||||
| 4WRAE | con conector según DIN EN 175201-804 | |||
| conector enchufable DIN EN 175201-804 2) | ||||
| Protección de válvula según EN 60529 | IP65 con conector enchufable montado y fijo | |||
Electrónica de control
| Para 4WRA | Amplificador digital en formato Eurocard 2) | VT-VSPD-1-2X (to RE 30523 – middle of 2006) | |
| Amplificador analógico en formato Eurocard 2) | VT-VSPA2-1-2X/… to RE 30110 | ||
| Amplificador de módulo analógico 2) | VT-MSPA2-1-1X a RE 30228 | ||
| Para 4WRAE | Módulo de valor de consigna analógico | integrado en las válvulas, ver página 8 | |
| VT- SWMA-1-1X/… to RE 29902 | |||
| Módulo de valor de consigna analógico | VT-SWMKA-1-1X/… to RE 29903 | ||
| tarjeta de valor de mando digital | VT-HACD-1-1X/… to RE 30143 | ||
| Tarjeta de valor de mando analógico | VT-SWKA-1-1X/… to RE 30255 | ||
| Supply voltage 4WRAE, 4WRA 3) | Tensión nominal | VDC | 24 |
| Valor límite inferior | V | 21 / 22 (4WRA); 19 (4WRAE) | |
| Valor límite superior | V | 35 | |
| Corriente del amplificador | lmáx | A | 1.8 |
| consumo | Corriente de impulso máx. | A | 3 |
Nota:
Para obtener detalles sobre la prueba de simulación ambiental que abarca EMC (compatibilidad electromagnética), clima y carga mecánica, consulte RE 29055-U (declaración relativa a la compatibilidad ambiental).Watch 4WRAE Product Video
Related Selection Resources
Request a 4WRAE Quotation
Tell us your required configuration, quantity and application.
Datos técnicos
(para aplicaciones fuera de estos parámetros, ¡consúltenos!)
General
| Tamaño nominal | NS | 6 | 10 | |
| Instalación | opcional, preferiblemente horizontal | |||
| Rango de temperatura de almacenamiento | ℃ | -20 a +80 | ||
| Ambiente | 4WRA | ℃ | -20 a +70 | |
| rango de temperatura | 4WRAE | ℃ | -20 a +50 | |
| Peso | 4WRA | kg | 2.0 | 6.6 |
| 4WRAE | kg | 2.2 | 6.8 | |
| Hidráulico (medido con HLP46, Θaceite= 40 ℃±5 ℃) | ||||
| Presión máx. de servicio | Puertos A, B, P | bar | 315 | |
| Puerto T | bar | 210 | ||
| Caudal nominal qV nom a Δp=10 bar | l/min | 7,15,26 | 30,60 | |
| Flujo máximo permisible | l/min | 42 (80)1) | 75 (140)1) | |
| Fluido a presión | aceite mineral (HL, HLP) según DIN 51524 ¡Otros fluidos a presión bajo petición! |
|||
| Rango de temperatura del fluido a presión | ℃ | -20 a +80 (preferiblemente de +40 a +50) | ||
| Rango de viscosidad | mm2/s | 20 a 380 (preferiblemente 30 a 46) | ||
| Grado máximo admisible de contaminación del fluido a presión, clase de limpieza según ISO 4406 (c) | clase 20/18/15 2) | |||
| Histéresis | % | ≤ 5 | ||
| Error de inversión | % | ≤ 1 | ||
| Sensibilidad de respuesta | % | ≤ 0.5 | ||
1) caudal permisible con una ruta de flujo dual
2) En los sistemas hidráulicos se debe respetar la clase de limpieza especificada para los componentes. Una filtración eficaz evita que se produzcan fallos y al mismo tiempo aumenta la vida útil de los componentes. Para la selección de filtros, véanse las hojas de catálogo RE 50070, RE 50076, RE 50081, RE 50086 y RE 50088.
Eléctrico
| Tamaño nominal | NS | 6 | 10 | |
| Tipo de voltaje | DC | |||
| Valor del comando signa | Entrada de voltaje "A1" | V | ±10 | |
| con tipo WRAE | F1" | mA | 4 a 20 | |
| Corriente máx. por solenoide | A | 2.5 | ||
| Bobina de solenoide | Valor en frío a 20 ℃ | Ω | 2 | |
| resistencia | Valor máximo de calor | Ω | 3 | |
| Deber | % | 100 | ||
| Temperatura máx. de la bobina 1) | ℃ | 150 | ||
| Conexiones eléctricas ver página 7 |
4WRA | con conector de enchufe según DIN EN 175301-803 o ISO 4400 | ||
| conector enchufable según DIN EN 175301-803 o ISO 4400 2) | ||||
| 4WRAE | con conector según DIN EN 175201-804 | |||
| conector enchufable DIN EN 175201-804 2) | ||||
| Protección de válvula según EN 60529 | IP65 con conector enchufable montado y fijo | |||
Electrónica de control
| Para 4WRA | Amplificador digital en formato Eurocard 2) | VT-VSPD-1-2X (hasta RE 30523 - mediados de 2006) | |
| Amplificador analógico en formato Eurocard 2) | VT-VSPA2-1-2X/... a RE 30110 | ||
| Amplificador de módulo analógico 2) | VT-MSPA2-1-1X a RE 30228 | ||
| Para 4WRAE | Módulo de valor de consigna analógico | integrado en las válvulas, ver página 8 | |
| VT- SWMA-1-1X/... a RE 29902 | |||
| Módulo de valor de consigna analógico | VT-SWMKA-1-1X/... a RE 29903 | ||
| tarjeta de valor de mando digital | VT-HACD-1-1X/... a RE 30143 | ||
| Tarjeta de valor de mando analógico | VT-SWKA-1-1X/... a RE 30255 | ||
| Tensión de alimentación 4WRAE, 4WRA 3) |
Tensión nominal | VDC | 24 |
| Valor límite inferior | V | 21 / 22 (4WRA); 19 (4WRAE) |
|
| Valor límite superior | V | 35 | |
| Corriente del amplificador | lmáx | A | 1.8 |
| consumo | Corriente de impulso máx. | A | 3 |
1) ¡Debido a la temperatura superficial de las bobinas del solenoide que se produce, se deben tener en cuenta las normas europeas DIN EN 563 y DIN EN 982!
2) Pedido separado
3) Con electrónica de control de Bosch Rexroth AG
Nota:
Para obtener detalles sobre la prueba de simulación ambiental que abarca EMC (compatibilidad electromagnética), clima y carga mecánica, consulte RE 29055-U (declaración relativa a la compatibilidad ambiental).







