شركة ونزهو برانس للمعدات الهيدروليكية المحدودة
AA4VG Closed Circuit Variable Piston Pump
The AA4VG pump is offered for closed-circuit hydrostatic drives with integrated auxiliary oil supply. Its AA4VG code and interface data must be checked independently when comparing an A4VG configuration, even where nominal displacement appears similar.
- Integrated auxiliary supply
- Flow reverses through neutral
- Adjustable pressure cut-off
- Through-drive configuration requires matching
PRANCE HYDRAULIC · PRODUCT SERIES
Axial piston; variable swashplate · Closed circuit
The AA4VG pump is offered for closed-circuit hydrostatic drives with integrated auxiliary oil supply. Its AA4VG code and interface data must be checked independently when comparing an A4VG configuration, even where nominal displacement appears similar.
Model

Confirm the complete model and approved specification with Prance Hydraulic. Product-series references alone do not establish interchangeability.
Configuration review · Technical documentation · Product selection
تفاصيل المنتج
- Integrated auxiliary supply
- Flow reverses through neutral
- Adjustable pressure cut-off
- Through-drive configuration requires matching
CATEGORIES: مضخة مكبسية, مضخة ذات إزاحة متغيرة
AA4VG Features & Application
Integrated auxiliary supply
Account for pilot or replenishment demand and the relevant pressure limits. Include filtration and the return or drain route in the circuit review.
Flow reverses through neutral
Review combined drive torque and simultaneous demand, including any additional pump connected to the drive.
Adjustable pressure cut-off
Keep continuous, intermittent and peak conditions separate. Use the row for the selected size and configuration.
Through-drive configuration requires matching
Review combined drive torque and simultaneous demand, including any additional pump connected to the drive.
AA4VG Specifications
| Series / model | AA4VG |
|---|---|
| Product type | AA4VG Closed Circuit Variable Piston Pump |
| تصميم | Axial piston; variable swashplate |
| Circuit / selection | Closed circuit |
| Published nominal sizes | 28, 40, 56, 71, 90 and 125 |
| Circuit | Closed circuit; verify charge and control requirements |
AA4VG Selection & Configuration
The AA4VG pump is offered for closed-circuit hydrostatic drives with integrated auxiliary oil supply. Its AA4VG code and interface data must be checked independently when comparing an A4VG configuration, even where nominal displacement appears similar.
Provide the complete machine loop, charge requirements and control specification. Confirm shaft and port standards, pressure cut-off settings and the torque capacity of any through-drive assembly before approving a replacement.

Your Application.
The Right Configuration.
Hydraulic pumps · Hydraulic motors · Hydraulic valves
Send the MS nameplate, operating requirements and installation drawing for a configuration review before quoting.
- Model review — send the full model code or an existing nameplate photograph.
- Interface matching — confirm shaft, mounting flange, rotation and ports.
- Operating conditions — provide flow, pressure, speed, fluid and duty cycle.
- Documentation — request the relevant product data and drawings for your review.

AA4VG Buying Guide
Use this sequence to prepare the AA4VG configuration for review and quotation.
- Define required flow at the actual drive speed and continuous pressure.
- Identify peak pressure, duration and the work cycle.
- Confirm the selected displacement control and any auxiliary-drive requirement.
- Match rotation viewed from the shaft end, shaft, flange and ports.
- Review inlet conditions, drain routing and the installation envelope.
- Confirm fluid, viscosity, temperature, filtration and seals.
- Approve the complete model, control, drawing, quantity and delivery terms.

Selection, Documentation & Project Support

Selection Support
Learn more →Share your hydraulic circuit, operating point and installation requirements for a configuration discussion.
Flow · Pressure · Speed · Interfaces

Technical Resources
Learn more →Review product documentation, model codes and technical data before finalizing the specification.
Datasheets · Model codes · Drawings

Project Inquiries
Learn more →Send your required model, quantity, application and project requirements to discuss your inquiry.
Product inquiries · Configuration review
Configuration, Quantity & Delivery
Confirm the complete MS code, approved drawing and operating limits. Availability, quantity, documentation and delivery date are confirmed in the quotation.
Discuss Your AA4VG Application
Send the full model code, operating duty, installation details and quantity.
Request a AA4VG QuotationAA4VG Questions Before Ordering
What type of product is the AA4VG?
AA4VG Closed Circuit Variable Piston Pump. Design: Axial piston; variable swashplate. Closed circuit. Confirm the complete order code for the offered version.
Can a similar pump replace the AA4VG?
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
Define required flow at the actual drive speed and continuous pressure. Identify peak pressure, duration and the work cycle. Attach the nameplate, complete order code, installation drawing and required quantity.
AA4VG Technical Data & Documents
View AA4VG catalog data and operating conditions
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
البيانات الفنية
| حجم | غير مقبول | 28 | 40 | 56 | 71 | 90 | 125 | |||
| الإزاحة الهندسية لكل دورة | Vg max | in3 | 1.71 | 2.44 | 3.42 | 4.33 | 5.49 | 7.63 | ||
| مضخة متغيرة الإزاحة | سم3 | 28 | 40 | 56 | 71 | 90 | 125 | |||
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | Vg Sp | in3 | 0.37 | 0.52 | 0.71 | 1.20 | 1.20 | 1.73 | ||
| سم3 | 6.1 | 8.6 | 11.6 | 19.6 | 19.6 | 28.3 | ||||
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits1) | الحد الأقصى عند Vجي ماكس | nالاسمية | دورة في الدقيقة | 4250 | 4000 | 3600 | 3300 | 3050 | 2950 | |
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits2) | nالأقصى 1 | دورة في الدقيقة | 4500 | 4200 | 3900 | 3600 | 3300 | 3250 | ||
| intermittent, maximum3) | nالأقصى 2 | دورة في الدقيقة | 5000 | 5000 | 4500 | 4100 | 3800 | 3450 | ||
| الحد الأدنى | nالحد الأدنى | دورة في الدقيقة | 500 | 500 | 500 | 500 | 500 | 500 | ||
| تدفق | عند nالاسمية و Vجي ماكس | qv | gpm | 31.4 | 42.3 | 53.4 | 61.8 | 72.6 | 94 | |
| لتر/دقيقة | 119 | 160 | 202 | 234 | 275 | 356 | ||||
| طاقة4) | عند nالاسمية, Vجي ماكس و | Δp = 5800 psi | P | hp | 106 | 143 | 180 | 209 | 245 | 319 |
| Δp =400 bar | P | كيلوواط | 79 | 107 | 134 | 156 | 183 | 238 | ||
| عزم الدوران4) | عند Vجي ماكس و | Δp =5800 psi | T | Ib-ft | 131 | 188 | 263 | 333 | 423 | 587 |
| Δp =400 bar | T | لا شيء جديد | 178 | 255 | 357 | 452 | 573 | 796 | ||
| Ap =1450 psi | T | رطل-قدم | 33 | 47 | 66 | 83 | 105 | 147 | ||
| Ap =100 bar | T | لا شيء جديد | 45 | 64 | 89 | 113 | 143 | 199 | ||
| صلابة الدوران لعمود القيادة | S | c | رطل-قدم/راديان | 23159 | 50892 | 59595 | 72871 | 116609 | 161010 | |
| ك.ن.م/راديان | 31.4 | 69 | 80.8 | 98.8 | 158.1 | 218.3 | ||||
| T | c | رطل-قدم/راديان | – | – | 70068 | 89171 | – | 185939 | ||
| ك.ن.م/راديان | – | – | 95 | 120.9 | – | 252.1 | ||||
| U | c | رطل-قدم/راديان | – | 37468 | – | – | 79362 | – | ||
| ك.ن.م/راديان | – | 50.8 | – | – | 107.6 | – | ||||
| عزم القصور الذاتي للمجموعة الدوارة | JTW | lbs-ft2 | 0.0522 | 0.0902 | 0.1566 | 0.2302 | 0.3536 | 0.5505 | ||
| كجم متر2 | 0.0022 | 0.0038 | 0.0066 | 0.0097 | 0.0149 | 0.0232 | ||||
| التسارع الزاوي الأقصى5) | α | راديان/ثانية2 | 38000 | 30000 | 24000 | 21000 | 18000 | 14000 | ||
| حجم الحالة | V | غالون | 0.24 | 0.29 | 0.40 | 0.34 | 0.40 | 0.55 | ||
| I | 0.9 | 1.1 | 1.5 | 1.3 | 1.5 | 2.1 | ||||
| الوزن (بدون القيادة عبر) تقريبًا. | m | Ibs | 64 | 68 | 84 | 110 | 132 | 176 | ||
| كيلوغرام | 29 | 31 | 38 | 50 | 60 | 80 | ||||
ملاحظة
▶Theoretical values, without efficiency and tolerances;values rounded ▶Operation above the maximum values or below the minimum values may result in a loss of function,a reduced service life or in the destruction of the axial piston unit. Prance recommends testing the loads by means of experiment or calculation /simulation and comparison with the permissible values.تحديد خصائص التشغيل
مفتاح
Vg Displacement per revolution [in3(سم3)] Δp Differential pressure [psi(bar)] n Rotational speed [rpm] ηv Volumetric efficiency ηhm Hydraulic-mechanical efficiency ηt الكفاءة الكلية (ηt= ηv*ηhm) 1)The values are applicable: – for the optimum viscosity range from Vopt = 170 to 82 SUS(36 to 16 mm2/s) – for hydraulic fluid based on mineral oils (for HF hydraulic fluids,observe the technical data in 90225) 2)Valid at half corner power (e.g. at Vجي ماكس and pN/2) 3) Valid at Δp = 1000 to 2200 psi (70 to 150 bar) or Δp < 4350 psi(300 bar) and t < 0.1 s 4)Without boost pump 5)The data are valid for values between the minimum required and maximum permissible rotational speed. Valid for external excitation (e.g. diesel engine 2 to 8 times rotary frequency, cardan shaft twice the rotary frequency). The limit value is only valid for a single pump. The load capacity of the connecting parts must be considered.القوى الشعاعية والمحورية المسموح بها على عمود القيادة
▼Splined shaft ANSI B92.1a| حجم | غير مقبول | 28 | 40 | 40 | 56 | 56 | 71 | ||
| عمود الدوران | in | 1 | 1 | 1 1/4 | 1 1/4 | 1 3/8 | 1 1/4 | ||
| Maximum radial force at distance a(from shaft collar) | ![]() |
Fq الحد الأقصى | lbf | 671 | 958 | 766 | 1073 | 975 | 1360 |
| N | 2983 | 4261 | 3409 | 4772 | 4338 | 6050 | |||
| a | in | 0.75 | 0.75 | 0.94 | 0.94 | 0.94 | 0.94 | ||
| mm | 19 | 19 | 24 | 24 | 24 | 24 | |||
| Maximum axial force | ![]() |
+Fax max | lbf | 350 | 477 | 477 | 654 | 654 | 954 |
| N | 1557 | 2120 | 2120 | 2910 | 2910 | 4242 | |||
| -Fax max | lbf | 94 | 198 | 198 | 355 | 355 | 620 | ||
| N | 417 | 880 | 880 | 1490 | 1490 | 2758 | |||
| حجم | غير مقبول | 71 | 90 | 90 | 125 | 125 | ||
| عمود الدوران | in | 1 3/8 | 1 1/4 | 1 3/4 | 1 3/4 | 2 | ||
| Maximum radial force at distance a(from shaft collar) | ![]() |
Fq الحد الأقصى | lbf | 1236 | 1724 | 1232 | 1711 | 1497 |
| N | 550 | 7670 | 5478 | 7609 | 6658 | |||
| a | in | 0.94 | 0.94 | 1.32 | 1.32 | 1.57 | ||
| mm | 24 | 24 | 33.5 | 33.5 | 40 | |||
| Maximum axial force | ![]() |
+Fax max | lbf | 954 | 973 | 973 | 1361 | 1361 |
| N | 4242 | 4330 | 4330 | 6053 | 6053 | |||
| -Fax max | lbf | 620 | 600 | 600 | 797 | 797 | ||
| N | 2758 | 2670 | 2670 | 3547 | 3547 | |||
ملاحظة
▶The axial and radial forces generally influence the service life of the bearings. ▶Special requirements apply in the case of belt drive and cardan shaft. Please contact u| حجم | غير مقبول | 28 | 40 | 56 | 71 | 90 | 125 | |||
| Torque at Vg max and | Δp = 5800 psi1) | T | رطل-قدم | 131 | 188 | 263 | 333 | 423 | 587 | |
| Δp = 400 bar1) | T | لا شيء جديد | 178 | 255 | 357 | 452 | 573 | 796 | ||
| Maximum input torque at drive shaft2) cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | S | TE الحد الأقصى | رطل-قدم | 232 | 444 | 444 | 444 | 1210 | 1210 | |
| لا شيء جديد | 314 | 602 | 602 | 602 | 1640 | 1640 | ||||
| in | 1 | 1 1/4 | 1 1/4 | 1 1/4 | 1 3/4 | 1 3/4 | ||||
| T | TE الحد الأقصى | رطل-قدم | – | – | 715 | 715 | – | 1969 | ||
| لا شيء جديد | – | – | 970 | 970 | – | 2670 | ||||
| in | – | – | 1 3/8 | 1 3/8 | – | 2 | ||||
| U3) | TE الحد الأقصى | رطل-قدم | – | 232 | – | – | 444 | – | ||
| لا شيء جديد | – | 314 | – | – | 602 | – | ||||
| in | – | 1 | – | – | 1 1/4 | – | ||||
| عزم الدوران المسموح به عبر القيادة القصوى4) | TD الحد الأقصى | رطل-قدم | 170 | 232 | 384 | 487 | 606 | 819 | ||
| لا شيء جديد | 231 | 314 | 521 | 660 | 822 | 1110 | ||||
توزيع عزم الدوران
| عزم الدوران الإدخالي | TE=T1+T2+T3 |
| TE < TE max | |
| عزم الدوران عبر القيادة | TD=T2+T3 |
| TD < TD max |
Related Selection Resources
Request a AA4VG Quotation
أخبرنا بالتكوين المطلوب، الكمية والتطبيق.
اكتب رمزاً
| 01 | 02 | 03 | 04 | 05 | 06 | 07 | 08 | 09 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | ||
| AA4V | G | D | / | 32 | - | N |
وحدة كباس محوري
| 01 | Swashplate design, variable, nominal pressure 5800 psi (400 bar), maximum pressure 6500 psi (450 bar) | AA4V |
نمط التشغيل
| 02 | مضخة، دائرة مغلقة | G |
الحجم (نيجيريا)
| 03 | الإزاحة الهندسية، انظر "البيانات الفنية" في الصفحة 8 | in3/rev. | 1.71 | 2.44 | 3.42 | 4.33 | 5.49 | 7.63 |
| cm3/rev. | 28 | 40 | 56 | 71 | 90 | 125 |
جهاز تحكم
| 28 | 40 | 56 | 71 | 90 | 125 | |||||
| 04 | بدون وحدة تحكم | ● | ● | ● | ● | ● | ● | إن في | ||
| تحكم تناسبي، هيدروليكي | Pilot-pressure related p = 87 to 260 psi (6 to 18 bar) | ○ | ○ | ● | ● | ● | ● | HD3 | ||
| مؤازر ميكانيكي | ● | ● | ● | ● | ● | ● | واجب منزلي | |||
| تحكم نسبي، كهربائي | الجهد = 12 فولت | ● | ● | ● | ● | ● | ● | الحلقة 3 | ||
| الجهد = 24 فولت | ● | ● | ● | ● | ● | ● | الحلقة الرابعة | |||
| تحكم بنقطتين، كهربائي | الجهد = 12 فولت | ● | ● | ● | ● | ● | ● | إي زي 1 | ||
| الجهد = 24 فولت | ● | ● | ● | ● | ● | ● | EZ2 | |||
| تحكم آلي، متعلق بالسرعة | الجهد = 12 فولت | ● | ● | ● | ● | ● | ● | DA1 | ||
| الجهد = 24 فولت | ● | ● | ● | ● | ● | ● | DA2 | |||
| Hydraulic control, direct operated | ○ | ○ | ● | ● | ● | ● | دي جي | |||
| تحكم كهربائي، تشغيل مباشر،,
صمامان خافضان للضغط |
الجهد = 12 فولت | ● | ● | ● | ● | - | - | إي تي 5 | ||
| الجهد = 24 فولت | ● | ● | ● | ● | - | - | إي تي 6 | |||
قطع الضغط
| 05 | Pressure cut-off (standard) | D |
مفتاح الوضع المحايد
| 06 | بدون مفتاح وضع حيادي (بدون رمز) | ● | |
| مفتاح الوضع المحايد (للتحكم في الأجهزة فقط) | ● | L |
محدد الشوط الميكانيكي
| 07 | بدون محدث شوط ميكانيكي (بدون رمز) | ● | |
| محدد شوط ميكانيكي، قابل للتعديل من الخارج | ● | M |
منفذ ضغط غرفة الشوط
| 28 | 40 | 56 | 71 | 90 | 125 | |||
| 08 | |Without stroking chamber pressure port X3, ، X4 (without code) | ● | ● | ● | ● | ● | ● | |
| منفذ ضغط غرفة الشوط X3, ، X4 | ○ | ○ | ● | ● | ● | ● | T | |
صمام تحكم مزدوج الفعل
| إن في | عالي الدقة | واجب منزلي | دي جي | دا | إي بي | سهل | ||||
| 09 | بدون صمام تحكم DA | ● | ● | ● | ● | - | ● | ● | 1 | |
| صمام تحكم مزدوج الفعل، إعداد ثابت | ● | ● | ● | ● | ● | - | 2 | |||
| DA control valve, mechanically adjustable with position lever | اتجاه التشغيل، في اتجاه عقارب الساعة | - | ● | ● | ● | ● | ● | - | ٣ آر | |
| اتجاه التشغيل,
عكس عقارب الساعة |
- | ● | ● | ● | ● | ● | - | 3L | ||
| صمام تحكم مزدوج الفعل، إعداد ثابت، فتحات لجهاز التحكم التجريبي | - | ○ | ○ | - | ○ | ○ | - | 7 | ||
| DA control valve, fixed setting and
brake inch valve mounted, control with brake fluid |
بناءً على الزيوت المعدنية | - | - | - | - | ● | - | - | 8 | |
•= available ○= on request -= not available
البرنامج المفضل
مسلسل
| 10 | المسلسل 3، الفهرس 2 | 32 |
اتجاه الدوران
| 11 | تمت معاينته على عمود الدوران | مع عقارب الساعة | R |
| عكس عقارب الساعة | L |
مادة مانعة للتسرب
| 12 | NBR (nitrile rubber), shaft seal in FKM (fluoroelastomer) | N |
عمود الدوران
| 28 | 40 | 56 | 71 | 90 | 125 | ||||
| 13 | عمود مسنن
ANSIB92.1a |
لمضخة واحدة | ● | ● | ● | ● | ● | ● | S |
| for combination pump - 1st pump | _1) | _1) | ● | ● | _1) | ● | T | ||
| only for combination pump -2nd pump | - | ● | - | - | ● | - | U | ||
شفة التركيب
| 28 | 40 | 56 | 71 | 90 | 125 | ||||
| 14 | SAEJ744 | ثقبان | ● | ● | ● | - | - | - | C |
| 2+4 فتحات | - | - | - | ● | ● | ● | F | ||
منفذ عامل
| 28 | 40 | 56 | 71 | 90 | 125 | ||||
| 15 | SAE working port A and B, top and bottom | منفذ الشفط S السفلي | - | ● | ● | ● | ● | ● | 52 |
| SAE working port A and B, top and bottom | منفذ الشفط S العلوي | - | ○ | ● | - | - | ○ | 53 | |
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits2) | منفذ الشفط S السفلي | ● | - | - | - | - | - | 60 | |
| SAE working port A and B, same side left2) | منفذ الشفط S السفلي | - | - | - | ● | - | - | ||
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits2) | منفذ الشفط S العلوي | - | - | - | - | - | ○ | 63 | |
Boost مضخة
| 16 | بدون مضخة تعزيز مدمجة | بدون محرك مرور | N |
| مع قيادة من خلال | K | ||
| مضخة تعزيز مدمجة | مع وبدون قيادة من خلال | F |
Through drives3)
| 28 | 40 | 56 | 71 | 90 | 125 | ||||
| 17 | بدون قيادة من خلال، الإصدارات N و F فقط (رقم 16) | ● | ● | ● | ● | ● | ● | 00 | |
| فلنجة SAE J7444) | سرّة لعمود مسنن | ||||||||
| ٢-٨٢ (أ) | نصف بوصة 9T 16/32DP5) | ● | ● | ● | ● | ● | ● | 01 | |
| ١٠١-٢ (ب) | ثمن بوصة 13T 16/32DP5) | ● | ● | ● | ● | ● | ● | 02 | |
| 1in 15T 16/32DP5) | ● | ● | ● | ● | ● | ● | 04 | ||
| 127-2 (C)6) | بوصة واحدة 1 1/4 14T 12/24DP5) | - | - | ● | ● | ● | ● | 07 | |
| 152-2/4 (D) | 13/4 in 13T 8/16DP5) | - | - | - | - | - | ● | 69 | |
• = متوفر ○ = عند الطلب - = غير متوفر
البرنامج المفضل
1) Standard for combination pump - 1st pump: Shaft S
2) Only possible without attachment filter
3)Specifications for version with integrated boost pump,please contact us for version without boost pump
4) 2 = 2-hole; 4 = 4-hole
5) محور للعمود المسنن وفقًا لـ ANSI B92.1a
6) NG90 to 125 with additional 4-hole-flange (127-4)
صمام تخفيف الضغط العالي
| Setting range Δp | 28 | 40 | 56 | 71 | 90 | 125 | ||||
| 18 | High pressure relief valve, pilot operated | 1450 to 6100 psi
(100 to 420 bar) |
مع تجاوز | - | - | - | ● | ● | ● | 1 |
| High-pressure relief valve, direct operated,
إعداد ثابت |
3600 to 6100 psi
(250 to 420 bar) |
بدون تجاوز | ● | ● | ● | - | - | - | 3 | |
| مع تجاوز | ● | ● | ● | - | - | - | 4 | |||
| 1450 to 3600 bar
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits |
بدون تجاوز | ● | ● | ● | - | - | - | 5 | ||
| مع تجاوز | ● | ● | ● | - | - | - | 6 | |||
دائرة تعزيز الترشيح / إمداد ضغط التعزيز الخارجي
| 28 | 40 | 56 | 71 | 90 | 125 | |||
| 19 | الترشيح في خط شفط مضخة التعزيز | ● | ● | ● | ● | ● | ● | S |
| الترشيح في خط ضغط مضخة التعزيز
Ports for external boost circuit filtration (Fe و Fa) |
● | ● | ● | ● | ● | ● | D | |
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | - | ● | ● | - | - | - | K | |
| مرشح الملحق مع صمام بدء بارد | - | ● | ● | ● | ● | ● | F | |
| مرشح الملحق مع صمام بدء بارد ومؤشر تلوث بصري | - | ● | ● | ● | ● | ● | P | |
| مرشح الملحق مع صمام بدء بارد ومؤشر تلوث كهربائي | - | ● | ● | ● | ● | ● | B | |
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | ● | ● | ● | ● | ● | ● | E | |
مستشعر زاوية الدوران
| 28 | 40 | 56 | 71 | 90 | 125 | |||
| 20 | بدون مستشعر زاوية الدوران (بدون رمز) | ● | ● | ● | ● | ● | ● | |
| مستشعر زاوية الدوران الكهربائي7) | ○ | ○ | ● | ○ | ○ | ○ | R | |
موصل للملفات اللولبية8)
| 21 | بدون موصل (بدون رمز)، فقط للتحكم الهيدروليكي البحت | ● | ||
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | بدون صمام ثنائي للحماية من الجهد الزائد | ● | P | |
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | ● | Q | ||
نسخة قياسية / خاصة
| 22 | الإصدار القياسي | بدون رمز | |
| مُدمج مع جزء ملحق أو مضخة ملحقة | -K | ||
| الإصدار الخاص | -S | ||
| مُدمج مع جزء ملحق أو مضخة ملحقة | -SK |
• = متوفر ○ = عند الطلب - = غير متوفر
البرنامج المفضل
ملاحظة
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
بالإضافة إلى رمز النوع، يرجى تحديد البيانات الفنية ذات الصلة عند تقديم طلبك.
يُرجى الاتصال بنا إذا تم استخدام مستشعر زاوية الدوران للتحكم
قد تختلف موصلات المكونات الكهربائية الأخرى.
البيانات الفنية
| حجم | غير مقبول | 28 | 40 | 56 | 71 | 90 | 125 | |||
| الإزاحة الهندسية لكل دورة | Vg max
|
in3 | 1.71 | 2.44 | 3.42 | 4.33 | 5.49 | 7.63 | ||
| مضخة متغيرة الإزاحة | سم3 | 28 | 40 | 56 | 71 | 90 | 125 | |||
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits | Vg Sp
|
in3 | 0.37 | 0.52 | 0.71 | 1.20 | 1.20 | 1.73 | ||
| سم3 | 6.1 | 8.6 | 11.6 | 19.6 | 19.6 | 28.3 | ||||
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits1) | الحد الأقصى عند Vجي ماكس | nالاسمية | دورة في الدقيقة | 4250 | 4000 | 3600 | 3300 | 3050 | 2950 | |
| cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits2) | nالأقصى 1 | دورة في الدقيقة | 4500 | 4200 | 3900 | 3600 | 3300 | 3250 | ||
| intermittent, maximum3) | nالأقصى 2 | دورة في الدقيقة | 5000 | 5000 | 4500 | 4100 | 3800 | 3450 | ||
| الحد الأدنى | nالحد الأدنى | دورة في الدقيقة | 500 | 500 | 500 | 500 | 500 | 500 | ||
| تدفق | عند nالاسمية و Vجي ماكس | qv | gpm | 31.4 | 42.3 | 53.4 | 61.8 | 72.6 | 94 | |
| لتر/دقيقة | 119 | 160 | 202 | 234 | 275 | 356 | ||||
| طاقة4) | عند nالاسمية, Vجي ماكس و | Δp = 5800 psi | P | hp | 106 | 143 | 180 | 209 | 245 | 319 |
| Δp =400 bar | P | كيلوواط | 79 | 107 | 134 | 156 | 183 | 238 | ||
| عزم الدوران4) | عند Vجي ماكس و | Δp =5800 psi | T | Ib-ft | 131 | 188 | 263 | 333 | 423 | 587 |
| Δp =400 bar | T | لا شيء جديد | 178 | 255 | 357 | 452 | 573 | 796 | ||
| Ap =1450 psi | T | رطل-قدم | 33 | 47 | 66 | 83 | 105 | 147 | ||
| Ap =100 bar | T | لا شيء جديد | 45 | 64 | 89 | 113 | 143 | 199 | ||
| صلابة الدوران لعمود القيادة | S | c | رطل-قدم/راديان | 23159 | 50892 | 59595 | 72871 | 116609 | 161010 | |
| ك.ن.م/راديان | 31.4 | 69 | 80.8 | 98.8 | 158.1 | 218.3 | ||||
| T | c | رطل-قدم/راديان | - | - | 70068 | 89171 | - | 185939 | ||
| ك.ن.م/راديان | - | - | 95 | 120.9 | - | 252.1 | ||||
| U | c | رطل-قدم/راديان | - | 37468 | - | - | 79362 | - | ||
| ك.ن.م/راديان | - | 50.8 | - | - | 107.6 | - | ||||
| عزم القصور الذاتي للمجموعة الدوارة | JTW | lbs-ft2 | 0.0522 | 0.0902 | 0.1566 | 0.2302 | 0.3536 | 0.5505 | ||
| كجم متر2 | 0.0022 | 0.0038 | 0.0066 | 0.0097 | 0.0149 | 0.0232 | ||||
| التسارع الزاوي الأقصى5) | α | راديان/ثانية2 | 38000 | 30000 | 24000 | 21000 | 18000 | 14000 | ||
| حجم الحالة | V | غالون | 0.24 | 0.29 | 0.40 | 0.34 | 0.40 | 0.55 | ||
| I | 0.9 | 1.1 | 1.5 | 1.3 | 1.5 | 2.1 | ||||
| الوزن (بدون القيادة عبر) تقريبًا. | m | Ibs | 64 | 68 | 84 | 110 | 132 | 176 | ||
| كيلوغرام | 29 | 31 | 38 | 50 | 60 | 80 | ||||
ملاحظة
▶القيم النظرية، بدون الكفاءة والتحملات؛ القيم مقربة
▶Operation above the maximum values or below the minimum values may result in a loss of function, a reduced service life or in the destruction of the axial piston unit. Bosch Rexroth recommend testing the load by means of experiment or calculation/simulation and comparison with the permissible values.
تحديد خصائص التشغيل
| تدفق | qv=(Vg ∙ n ∙ ηv) /231 | gpm | (Vg ∙ n ∙ ηv) / 1000 | لتر/دقيقة |
| عزم الدوران | T=(Vg ∙ Δp) /(24 ∙ π ∙ ηhm) | رطل-قدم | (Vg ∙ Δp) /(24 ∙ π ∙ ηhm) | لا شيء جديد |
| طاقة | P=(2π ∙ T ∙ n)/33000=(qv ∙ Δp)/(1714 ∙ ηt) | HP | (2π ∙ M ∙ n)/60000=(qv ∙ Δp∙ ηt)/600 | كيلوواط |
مفتاح
Vg Displacement per revolution [in3(سم3)]
Δp Differential pressure [psi(bar)]
ن سرعة الدوران [دورة في الدقيقة]
ηv الكفاءة الحجمية
ηhm الكفاءة الهيدروليكية الميكانيكية
ηt الكفاءة الكلية (ηt= ηv*ηhm)
1)The values are applicable:
- for the optimum viscosity range from Vopt = 170 to 82 SUS(36 to 16 mm2/s)
- for hydraulic fluid based on mineral oils (for HF hydraulic fluids,observe the technical data in 90225)
2)Valid at half corner power (e.g. at Vجي ماكس and pN/2)
3) Valid at Δp = 1000 to 2200 psi (70 to 150 bar) or Δp < 4350 psi(300 bar) and t < 0.1 s
4)Without boost pump
5)The data are valid for values between the minimum required and maximum permissible rotational speed.
Valid for external excitation (e.g. diesel engine 2 to 8 times rotary frequency, cardan shaft twice the rotary frequency).
The limit value is only valid for a single pump.
The load capacity of the connecting parts must be considered.
القوى الشعاعية والمحورية المسموح بها على عمود القيادة
▼Splined shaft ANSI B92.1a
| حجم | غير مقبول | 28 | 40 | 40 | 56 | 56 | 71 | ||
| عمود الدوران | in | 1 | 1 | 1 1/4 | 1 1/4 | 1 3/8 | 1 1/4 | ||
| Maximum radial force at distance a(from shaft collar) | ![]() |
Fq الحد الأقصى | lbf | 671 | 958 | 766 | 1073 | 975 | 1360 |
| N | 2983 | 4261 | 3409 | 4772 | 4338 | 6050 | |||
| a | in | 0.75 | 0.75 | 0.94 | 0.94 | 0.94 | 0.94 | ||
| mm | 19 | 19 | 24 | 24 | 24 | 24 | |||
| Maximum axial force | ![]() |
+Fax max | lbf | 350 | 477 | 477 | 654 | 654 | 954 |
| N | 1557 | 2120 | 2120 | 2910 | 2910 | 4242 | |||
| -Fax max | lbf | 94 | 198 | 198 | 355 | 355 | 620 | ||
| N | 417 | 880 | 880 | 1490 | 1490 | 2758 | |||
| حجم | غير مقبول | 71 | 90 | 90 | 125 | 125 | ||
| عمود الدوران | in | 1 3/8 | 1 1/4 | 1 3/4 | 1 3/4 | 2 | ||
| Maximum radial force at distance a(from shaft collar) | ![]() |
Fq الحد الأقصى | lbf | 1236 | 1724 | 1232 | 1711 | 1497 |
| N | 550 | 7670 | 5478 | 7609 | 6658 | |||
| a | in | 0.94 | 0.94 | 1.32 | 1.32 | 1.57 | ||
| mm | 24 | 24 | 33.5 | 33.5 | 40 | |||
| Maximum axial force | ![]() |
+Fax max | lbf | 954 | 973 | 973 | 1361 | 1361 |
| N | 4242 | 4330 | 4330 | 6053 | 6053 | |||
| -Fax max | lbf | 620 | 600 | 600 | 797 | 797 | ||
| N | 2758 | 2670 | 2670 | 3547 | 3547 | |||
ملاحظة
▶The axial and radial forces generally influence the service life of the bearings.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.
| حجم | غير مقبول | 28 | 40 | 56 | 71 | 90 | 125 | |||
| Torque at Vg max and | Δp = 5800 psi1) | T | رطل-قدم | 131 | 188 | 263 | 333 | 423 | 587 | |
| Δp = 400 bar1) | T | لا شيء جديد | 178 | 255 | 357 | 452 | 573 | 796 | ||
| Maximum input torque
at drive shaft2) cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits |
S | TE الحد الأقصى | رطل-قدم | 232 | 444 | 444 | 444 | 1210 | 1210 | |
| لا شيء جديد | 314 | 602 | 602 | 602 | 1640 | 1640 | ||||
| in | 1 | 1 1/4 | 1 1/4 | 1 1/4 | 1 3/4 | 1 3/4 | ||||
| T | TE الحد الأقصى | رطل-قدم | - | - | 715 | 715 | - | 1969 | ||
| لا شيء جديد | - | - | 970 | 970 | - | 2670 | ||||
| in | - | - | 1 3/8 | 1 3/8 | - | 2 | ||||
| U3) | TE الحد الأقصى | رطل-قدم | - | 232 | - | - | 444 | - | ||
| لا شيء جديد | - | 314 | - | - | 602 | - | ||||
| in | - | 1 | - | - | 1 1/4 | - | ||||
| عزم الدوران المسموح به عبر القيادة القصوى4) | TD الحد الأقصى | رطل-قدم | 170 | 232 | 384 | 487 | 606 | 819 | ||
| لا شيء جديد | 231 | 314 | 521 | 660 | 822 | 1110 | ||||
توزيع عزم الدوران

| عزم الدوران عند المضخة الأولى | T1 |
| عزم الدوران عند المضخة الثانية | T2 |
| عزم الدوران عند المضخة الثالثة | T3 |
| عزم الدوران الإدخالي | TE=T1+T2+T3 |
| TE < TE max | |
| عزم الدوران عبر القيادة | TD=T2+T3 |
| TD < TD max |
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
3) Shaft "U" is only permitted as drive shaft on the 2nd pump on a combination pump of the same size.
4)Note maximum input torque for shaft S!









