A10VG Closed Circuit Variable Piston Pump

The A10VG variable displacement pump serves closed-circuit hydraulic drives. Moving the swashplate through neutral changes flow direction, while the boost circuit supplies replenishment and control oil according to the selected configuration.

  • Integrated boost and pilot-oil supply
  • Flow reversal through swashplate neutral
  • High-pressure relief and boost functions
  • Control and pressure cut-off options

PRANCE HYDRAULIC · PRODUCT SERIES

A10VG Closed Circuit Variable Piston Pump

Axial piston; variable swashplate · Closed circuit

The A10VG variable displacement pump serves closed-circuit hydraulic drives. Moving the swashplate through neutral changes flow direction, while the boost circuit supplies replenishment and control oil according to the selected configuration.

Model

✓A10VG original product photograph
A10VGAxial piston; variable swashplate
Request a Quotationعرض البيانات الفنية وورقة البيانات

Confirm the complete model and approved specification with Prance Hydraulic. Product-series references alone do not establish interchangeability.

Configuration review · Technical documentation · Product selection

تفاصيل المنتج

  • Integrated boost and pilot-oil supply
  • Flow reversal through swashplate neutral
  • High-pressure relief and boost functions
  • Control and pressure cut-off options

CATEGORIES: مضخة مكبسية, مضخة ذات إزاحة متغيرة

A10VG Features & Application

Integrated boost and pilot-oil supply

Account for pilot or replenishment demand and the relevant pressure limits. Include filtration and the return or drain route in the circuit review.

Flow reversal through swashplate neutral

Review combined drive torque and simultaneous demand, including any additional pump connected to the drive.

High-pressure relief and boost functions

Account for pilot or replenishment demand and the relevant pressure limits. Include filtration and the return or drain route in the circuit review.

Control and pressure cut-off options

Match the complete control option and its command requirements to the existing controller. Similar housings can use different control arrangements.

A10VG Specifications

Series / modelA10VG
Product typeA10VG Closed Circuit Variable Piston Pump
تصميمAxial piston; variable swashplate
Circuit / selectionClosed circuit
Published nominal sizes18, 28, 45 and 63
Listed geometric displacement18, 28, 46 and 63 cm³/rev

A10VG Selection & Configuration

The A10VG variable displacement pump serves closed-circuit hydraulic drives. Moving the swashplate through neutral changes flow direction, while the boost circuit supplies replenishment and control oil according to the selected configuration.

Size the main loop and boost supply together. Include leakage replacement, flushing demand, control flow and the intended neutral behavior. Confirm relief and pressure cut-off settings from the exact control code rather than treating them as interchangeable adjustments.

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

Your Application.
The Right Configuration.

Hydraulic pumps · Hydraulic motors · Hydraulic valves

Send the MS nameplate, operating requirements and installation drawing for a configuration review before quoting.

  • Model review — send the full model code or an existing nameplate photograph.
  • Interface matching — confirm shaft, mounting flange, rotation and ports.
  • Operating conditions — provide flow, pressure, speed, fluid and duty cycle.
  • Documentation — request the relevant product data and drawings for your review.
Prance workshop with a row of production equipment

A10VG Buying Guide

Use this sequence to prepare the A10VG configuration for review and quotation.

  1. Define required flow at the actual drive speed and continuous pressure.
  2. Identify peak pressure, duration and the work cycle.
  3. Confirm the selected displacement control and any auxiliary-drive requirement.
  4. Match rotation viewed from the shaft end, shaft, flange and ports.
  5. Review inlet conditions, drain routing and the installation envelope.
  6. Confirm fluid, viscosity, temperature, filtration and seals.
  7. Approve the complete model, control, drawing, quantity and delivery terms.
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

Selection, Documentation & Project Support

Prance technical team image from its company website

Selection Support

Learn more →

Share your hydraulic circuit, operating point and installation requirements for a configuration discussion.


Flow · Pressure · Speed · Interfaces
Prance quality standards image from its company website

Technical Resources

Learn more →

Review product documentation, model codes and technical data before finalizing the specification.


Datasheets · Model codes · Drawings
Prance sales team image from its company website

Project Inquiries

Learn more →

Send your required model, quantity, application and project requirements to discuss your inquiry.


Product inquiries · Configuration review

Configuration, Quantity & Delivery

Confirm the complete MS code, approved drawing and operating limits. Availability, quantity, documentation and delivery date are confirmed in the quotation.

Discuss Your A10VG Application

Send the full model code, operating duty, installation details and quantity.

Request a A10VG Quotation

A10VG Questions Before Ordering

What type of product is the A10VG?

A10VG Closed Circuit Variable Piston Pump. Design: Axial piston; variable swashplate. Closed circuit. Confirm the complete order code for the offered version.

Can a similar pump replace the A10VG?

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

Define required flow at the actual drive speed and continuous pressure. Identify peak pressure, duration and the work cycle. Attach the nameplate, complete order code, installation drawing and required quantity.

A10VG Technical Data & Documents

View A10VG catalog data and operating conditions

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.

البيانات الفنية

حجم غير مقبول 18 28 45 63
Geometric displacement, per revolution
مضخة متغيرة الإزاحة Vg max   سم3 18 28 46 63
boost pump (at p = 20 bar) Vg Sp   سم3 5.5 6.1 8.6 14.9
سرعة الدوران1) الحد الأقصى عند Vجي ماكس nالاسمية الحد الأدنى-1 4000 3900 3300 3000
limited maximum2) nالأقصى 1 الحد الأدنى-1 4850 4200 3550 3250
intermittent maximum3) nالأقصى 2 الحد الأدنى-1 5200 4500 3800 3500
الحد الأدنى nالحد الأدنى الحد الأدنى-1 500 500 500 500
عزم الدوران4) with Vجي ماكس و Δp =300 bar M لا شيء جديد 86 134 215 301
Δp =100 bar M لا شيء جديد 28.6 44.6 72 100.3
صلابة الدوران لعمود القيادة S c ك.ن.م/راديان 20.28 32.14 53.40 78.37
T c ك.ن.م/راديان – – 73.80 92.37
Moment of inertia of the rotary group JTW كجم متر2 0.00093 0.0017 0.0033 0.0056
التسارع الزاوي الأقصى5) α راديان/ثانية2 6800 5500 4000 3300
حجم الحالة V l 0.45 0.64 0.75 1.1
الوزن (بدون القيادة عبر) تقريبًا.6) m kg 18 25 27 39

ملاحظة

▶Theoretical values, without efficiency and tolerances;values rounded ▶Operation above the maximum values or below the minimum values may result in a loss of function,a reduced service life or in the destruction of the axial piston unit. Prance recommends testing the loads by means of experiment or calculation /simulation and comparison with the permissible values.

تحديد خصائص التشغيل

مفتاح

Vg  الإزاحة لكل دورة في [سم3] Δp  Differential pressure [bar] n   Rotational speed [rpm] ηv   Volumetric efficiency ηhm  Hydraulic-mechanical efficiency ηt   الكفاءة الكلية (ηt= ηv*ηhm) 1)The values are applicable: – for the optimum viscosity range from Vopt = 36 … 16 mm2/s – for hydraulic fluid based on mineral oils (for HF hydraulic fluids,observe the technical data in 90225) 2)Valid at half corner power (e.g. at Vg max and pi/2) 3) Valid at Ap = 70 … 150 bar or Ap < 300 bar and t < 0.1 s 4)Without boost pump 5)The data are valid for values between the minimum required and maximum permissible rotational speed. Valid for external excitation (e. g. diesel engine 2 to 8 times rotary frequency; cardan shaft twice the rotary frequency). The limit value is only valid for a single pump. The load capacity of the connection parts must be considered. 6)Weight may vary by equipment.

Permissible radial and axial loading of the drive shaft

حجم غير مقبول 18 28 28 45 45 63 63
عمود الدوران in 7/8 1 1 1/4 1 1 1/4 1 1/4 1 3/8
Maximum radial force at distance a (to the shaft collar) cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits Fq الحد الأقصى N 1300 2500 2500 3600 3600 5000 5000
a mm 16.5 17.5 17.5 17.5 17.5 17.5 17.5
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits +Fax max N 973 987 987 1500 1500 2200 2200
-Fax max N 973 987 987 1500 1500 2200 2200

ملاحظة

▶The axial and radial loading generally influence the bearing service life. ▶Special requirements apply in the case of belt drive and cardan shaft. Please contact us.

عزم الإدخال والعزم المسموح بهما للقيادة عبر

حجم غير مقبول 18 28 45 63
عزم الإدخال الأقصى على عمود القيادة2)
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits S ME الحد الأقصى لا شيء جديد 192 314 314 602
in 7/8 1 1 1 1/4
T ME الحد الأقصى لا شيء جديد – 602 602 970
in – 1 1/4 1 1/4 1 3/8
عزم الدوران المسموح به عبر القيادة القصوى ME الحد الأقصى لا شيء جديد 112 220 314 439

توزيع عزم الدوران

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
عزم الدوران الإدخالي ME=M1+M2+M3
ME < ME max
عزم الدوران عبر القيادة MD=M2+M3
MD < MD max
1) Efficiency not considered 2) For drive shafts free of radial force
Watch A10VG Product Video
A10VG product video

Request a A10VG Quotation

أخبرنا بالتكوين المطلوب، الكمية والتطبيق.

نموذج الاتصال التجريبي
A10VG original product photograph

اكتب رمزاً

01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22
A10V G / 10 - N C

وحدة كباس محوري

01 تصميم لوح التآكل، متغير، الضغط الاسمي 350 بار، أقصى ضغط 400 بار A10V

نمط التشغيل

02 مضخة، دائرة مغلقة G

المقاس (NG)

03 الإزاحة الهندسية، انظر "البيانات الفنية" في الصفحة 8 18 28 45 63

جهاز تحكم

18 28 45 63
04 Proportional control

هيدروليكي

pilot-pressure related, with inlet filtration in P and X1/X2 ● ● ● ● HD3
mechanical servo ● ● ● ● واجب منزلي
تحكم آلي، متعلق بالسرعة1) الجهد = 12 فولت - ● ● ● DA1
الجهد = 24 فولت - ● ● ● DA2
Hydraulic control direct operated ● ● ● ● دي جي
تحكم نسبي، كهربائي with proportional solenoid with inlet filtration in P and X1/X2 الجهد = 12 فولت ● ● ● ● الحلقة 3
الجهد = 24 فولت ● ● ● ● الحلقة الرابعة
تحكم بنقطتين، كهربائي with switching solenoid الجهد = 12 فولت ● ● ● ● إي زي 1
الجهد = 24 فولت ● ● ● ● EZ2
Electric control, direct operated

two pressure reducing valves (FTDRE)

الجهد = 12 فولت - ● ● - ET3
الجهد = 24 فولت - ● ● - ET4
Electric pressure controller,

negative control,

with 4/2 directional valve and one pressure reducing valve1)

de-energized, stroking chamber is controlled via X1 الجهد = 24 فولت - ● ● ● ED2
de-energized, stroking chamber is controlled via X2 الجهد = 24 فولت - ● ● ● ED4

قطع الضغط

18 28 45 63
05 Without pressure cut-off (without code) ● ● ● ●
With pressure cut-off - ● ● ● D

مفتاح الوضع المحايد

18 28 45 63
06 بدون مفتاح وضع حيادي (بدون رمز) ● ● ● ●
Neutral position switch with DEUTSCH connector (only for HW control) ● ● ● ● L

محدد الشوط الميكانيكي2)

18 28 45 63
07 بدون محدث شوط ميكانيكي (بدون رمز) ● ● ● ●
محدد شوط ميكانيكي، قابل للتعديل من الخارج ● ● ● ● L

منفذ ضغط غرفة الشوط2)

18 28 45 63
08 بدون ضغط منفذ ضغط حجرة (إكس)3, ، X4(without code) ● ● ● ●
Stroking chamber pressure portX3, ، X4 ● ● ● ● L

• = متوفر ○ = عند الطلب - = غير متوفر     البرنامج المفضل

1) Only possible in combination with pressure cut-off(DA.D..., ED.D...)

2) Not available in combination with DG control device

DA control valve for NG28 ... 63

عالي الدقة واجب منزلي دي جي دا إي بي سهل ET ED
09 بدون صمام تحكم DA ● ● ● - ● ● ● ● 1
صمام تحكم مزدوج الفعل، إعداد ثابت ● ● ● ● ● - - - 2
DA control valve, mechanically adjustable,

with position lever

direction of actuation, counter-clockwise ● ● ● ● ● - - - 3L
اتجاه التشغيل، في اتجاه عقارب الساعة ● ● ● ● ● - - - ٣ آر
صمام تحكم مزدوج الفعل، إعداد ثابت، فتحات لجهاز التحكم التجريبي ● ● - ● ● - - - 7
DA control valve, fixed setting, and hydraulic inch valve mounted,control with mineral oil - - - ● - - - - 8

مسلسل

10 Series 1, index 0 10

اتجاه الدوران

18 28 45 63
11 تمت معاينته على عمود الدوران مع عقارب الساعة ● ● ● ● R
عكس عقارب الساعة ● ● ● ● L

مادة مانعة للتسرب

18 28 45 63
12 NBR (nitrile rubber), shaft seal made of FKM (fluoroelastomer) ● ● ● ● N

عمود الدوران

18 28 45 63
13 عمود مسنن

ANSI B92.1a-1976

لمضخة واحدة ● ● ● ● S
لمضخة مركبة ● ● ● ● T

شفة التركيب

18 28 45 63
14 SAE J744 ثقبان ● ● ● ● C

منفذ عامل

15 Port thread: Metric with profile sealing ring sealing according to DIN 3852

Fastening thread at the SAE working port and through drive: Metric according to DIN 13

18 28 45 63
SAE working port A and B, same side left cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits - ● ● ● 10
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

- ● ● ● 13
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

18 28 45 63
Threaded port A and B, same side right cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits ● - - - 16

مضخة تعزيز

18 28 45 63
16 بدون مضخة تعزيز مدمجة بدون محرك مرور ● ● ● ● N
مع قيادة من خلال ● ● ● ● K
مضخة تعزيز مدمجة مع وبدون قيادة من خلال ● ● ● ● F

• = متوفر ○ = عند الطلب - = غير متوفر     البرنامج المفضل

من خلال القيادة3)

18 28 45 63
17 Without through drive, only for version N and F (position 16) ● ● ● ● 00
فلنجة SAE J744 سرّة لعمود مسنن4)
٢-٨٢ (أ) ٥/٨ بوصة 9T 16/32DP ● ● ● ● 01
٣/٤ بوصة 11 سن 16/32DP - ● ● ● 52
101-2(ب) 7/8 in 13 سن 16/32DP ● ● ● ● 02
١ بوصة 15T 16/32DP - ● ● ● 04
127-2 (C) 1 1/4 بوصة 14 سن 12/24 دي بي - - - ● 07

صمام تخفيف الضغط العالي

Setting range Δpعالي الدقة 18 28 45 63
18 صمام تخفيف الضغط العالي

direct operated, fixed setting

250 ... 320 bar بدون تجاوز ● ● ● ● 3
مع تجاوز ● ● ● ● 5
100 ... 250 bar بدون تجاوز - ● ● ● 4
مع تجاوز - ● ● ● 6

دائرة تعزيز الترشيح / إمداد ضغط التعزيز الخارجي

18 28 45 63
19 الترشيح في خط شفط مضخة التعزيز ● ● ● ● S
الترشيح في خط ضغط مضخة التعزيز

Ports for external boost circuit filtration (Fe and G (Fa))

- ●5) ●5) ● D
External boost pressure supply (on version without integrated boost pump - N, K) ● ● ● ● E

موصل للملفات اللولبية6)

18 28 45 63
20 Without connector (without code), only with purely hydraulic controls ● ● ● ●
DEUTSCH molded connector

2-pin, DT04-2P

بدون صمام ثنائي للحماية من الجهد الزائد ● ● ● ● P
with suppressor diode (only for EZ, DA and ED switching solenoid) ● ● ● ● Q

Flushing valve

18 28 45 63
21 Without flushing valve (without code) ● ● ● ●
Flushing valve SAE connection diagram, metric mounting ● ● ● ● 1
metric threaded ports ● ● ● ● 3

الإصدار القياسي/الخاص

22 الإصدار القياسي بدون رمز
الإصدار الخاص -S

•= متوفر ○= عند الطلب -= غير متوفر     البرنامج المفضل

ملاحظة

▶Note the project planning notes on page 59!

بالإضافة إلى رمز النوع، يرجى تحديد البيانات الفنية ذات الصلة عند تقديم طلبك.

▶Please note that not all type code combinations are available although the individual functions are marked as being available.

3)Specifications for version with integrated boost pump,please contact us for version without boost pump

4)Hub for splined shaft according to ANSI B92.1a-1976(drive shaft allocation according to SAE J744)

5) Pressure filtration is not possible in connection with DA control valve

قد تختلف موصلات المكونات الكهربائية الأخرى.

البيانات الفنية

حجم غير مقبول 18 28 45 63
Geometric displacement, per revolution
مضخة متغيرة الإزاحة Vg max

 

سم3 18 28 46 63
boost pump (at p = 20 bar) Vg Sp

 

سم3 5.5 6.1 8.6 14.9
سرعة الدوران1) الحد الأقصى عند Vجي ماكس nالاسمية الحد الأدنى-1 4000 3900 3300 3000
limited maximum2) nالأقصى 1 الحد الأدنى-1 4850 4200 3550 3250
intermittent maximum3) nالأقصى 2 الحد الأدنى-1 5200 4500 3800 3500
الحد الأدنى nالحد الأدنى الحد الأدنى-1 500 500 500 500
تدفق عند nالاسمية و Vجي ماكس qv لتر/دقيقة 72 109 152 189
طاقة4) عند nالاسمية,  Vجي ماكس و Δp =300 bar P كيلوواط 36 54.6 75.9 94.5
عزم الدوران4) with Vجي ماكس و Δp =300 bar M لا شيء جديد 86 134 215 301
Δp =100 bar M لا شيء جديد 28.6 44.6 72 100.3
صلابة الدوران لعمود القيادة S c ك.ن.م/راديان 20.28 32.14 53.40 78.37
T c ك.ن.م/راديان - - 73.80 92.37
Moment of inertia of the rotary group JTW كجم متر2 0.00093 0.0017 0.0033 0.0056
التسارع الزاوي الأقصى5) α راديان/ثانية2 6800 5500 4000 3300
حجم الحالة V l 0.45 0.64 0.75 1.1
الوزن (بدون القيادة عبر) تقريبًا.6) m kg 18 25 27 39

ملاحظة

▶القيم النظرية، بدون الكفاءة والتحملات؛ القيم مقربة

▶Operation above the maximum values or below the minimum values may result in a loss of function,a reduced service life or in the destruction of the axial piston unit. Prance recommends testing the loads by means of experiment or calculation /simulation and comparison with the permissible values.

تحديد خصائص التشغيل

تدفق qv=(Vg ∙ n ∙ ηv) / 1000 لتر/دقيقة
عزم الدوران م = (فg ∙ Δp) / (20 ∙ π ∙ ηhm) لا شيء جديد
طاقة P = (2π ∙ م ∙ ن) / 60000 = (qv ∙ Δp) / (600 ∙ ηt)  كيلوواط

مفتاح

Vg  الإزاحة لكل دورة في [سم3]

Δp ضغط تفاضلي [بار]

ن سرعة الدوران [دورة في الدقيقة]

ηv   الكفاءة الحجمية

ηhm  الكفاءة الهيدروليكية الميكانيكية

ηt   الكفاءة الكلية (ηt= ηv*ηhm)

1)The values are applicable:

- for the optimum viscosity range from Vopt = 36 ... 16 mm2/s

- for hydraulic fluid based on mineral oils (for HF hydraulic fluids,observe the technical data in 90225)

2)Valid at half corner power (e.g. at Vg max and pi/2)

3) Valid at Ap = 70 ... 150 bar or Ap < 300 bar and t < 0.1 s

4)Without boost pump

5)The data are valid for values between the minimum required and maximum permissible rotational speed.

Valid for external excitation (e. g. diesel engine 2 to 8 times rotary frequency; cardan shaft twice the rotary frequency).

The limit value is only valid for a single pump.

The load capacity of the connection parts must be considered.

6)Weight may vary by equipment.

Permissible radial and axial loading of the drive shaft

حجم غير مقبول 18 28 28 45 45 63 63
عمود الدوران in 7/8 1 1 1/4 1 1 1/4 1 1/4 1 3/8
Maximum radial

force at distance a

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

Fq الحد الأقصى N 1300 2500 2500 3600 3600 5000 5000
a mm 16.5 17.5 17.5 17.5 17.5 17.5 17.5
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits +Fax max N 973 987 987 1500 1500 2200 2200
-Fax max N 973 987 987 1500 1500 2200 2200

ملاحظة

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits.

عزم الإدخال والعزم المسموح بهما للقيادة عبر

حجم غير مقبول 18 28 45 63
عزم الدوران عند Vجي ماكس cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits1) M لا شيء جديد 86 134 220 301
عزم الإدخال الأقصى على عمود القيادة2)
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits S ME الحد الأقصى لا شيء جديد 192 314 314 602
in 7/8 1 1 1 1/4
T ME الحد الأقصى لا شيء جديد - 602 602 970
in - 1 1/4 1 1/4 1 3/8
عزم الدوران المسموح به عبر القيادة القصوى ME الحد الأقصى لا شيء جديد 112 220 314 439

توزيع عزم الدوران

عزم الدوران عند المضخة الأولى M1
عزم الدوران عند المضخة الثانية M2
عزم الدوران عند المضخة الثالثة M3
عزم الدوران الإدخالي ME=M1+M2+M3
ME < ME max
عزم الدوران عبر القيادة MD=M2+M3
MD < MD max

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits

A10VG