🔍
Hydraulic High Pressure Piston Motor A6VM catalog product view
Hydraulic High Pressure Piston Motor A6VM
Hydraulic High Pressure Piston Motor A6VM
Hydraulic High Pressure Piston Motor A6VM
Hydraulic High Pressure Piston Motor A6VM
Hydraulic High Pressure Piston Motor A6VM
  1. Hydraulic High Pressure Piston Motor A6VM catalog product view
  2. Hydraulic High Pressure Piston Motor A6VM
  3. Hydraulic High Pressure Piston Motor A6VM
  4. Hydraulic High Pressure Piston Motor A6VM
  5. Hydraulic High Pressure Piston Motor A6VM
  6. Hydraulic High Pressure Piston Motor A6VM

Hydraulic High Pressure Piston Motor A6VM

1.Robust motor with long service life .

2.Approved for very high rotational speeds

3.High control range (can be swiveled to zero)

4.Variety of contra Is Optionally with flushing and boost-pressure valve mounted

5.Optionally with Integrated or mounted counterbalance valve

6.Bent-axis design

وصف تفصيلي

This equipment is equipped with a robust motor that features a durable structure and high wear resistance, ensuring a long service life even in harsh working environments such as high load, high temperature and frequent start-stop, which reduces maintenance frequency and overall operational costs. The motor is approved for very high rotational speeds, enabling stable and reliable operation at extreme high-speed conditions without excessive vibration, noise or component damage, making it suitable for high-speed hydraulic drive scenarios requiring efficient power output. It has a high control range and can be swiveled to zero displacement, allowing flexible adjustment of output flow from maximum to zero, realizing precise control of the hydraulic system and avoiding energy waste. It offers a variety of control options to adapt to different system requirements, and can be optionally equipped with mounted flushing and boost-pressure valve to enhance oil cleanliness and maintain stable boost pressure. Additionally, it can be optionally configured with an integrated or mounted counterbalance valve to prevent load drift and ensure safe operation. Adopting a bent-axis design, it optimizes power transmission efficiency, reduces internal mechanical wear, and ensures compact structure while enhancing operational stability.

التقييم وطلب عرض الأسعار

The A6VM series is used in mobile drive circuits where torque, speed and installation envelope must match the machine layout. Confirm displacement, speed range, case drain routing and mounting interface before ordering.

المعلومات التي يجب تضمينها في طلب عرض الأسعار الخاص بك

  • Required torque and speed at working pressure
  • Displacement preference or calculated value
  • Mounting flange, shaft and port orientation
  • Application duty cycle and ambient conditions

الموارد ذات الصلة

اطلب عرض سعر · مركز التنزيل · تصنيع أصلي / تصنيع تصميمي أصلي

اكتب رمزاً

01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20
A6V M / 63 W - V -

Hydraulic fluid

01 Mineral oil and HFD. HFD for sizes 250 to 1000 only in conjunction with long-life bearing "L"(without code)
HFB, HFC hydraulic fluid Size 28 to 200 (without code)
Sizes 250 to 1000(only in conjunction with long-life bearings"L") E

وحدة كباس محوري

02 Bent-axis design, variable A6V

Drive shaft bearing

28...200 250 355 500 1000
03 Standard bearings (without code) ● ● ● ● -
Long-life bearings - ● ● ● ● L

نمط التشغيل

04 Motor (plug-in motor A6VE, see data sheet 91606) M

المقاس (NG)

05 Geometric displacement 28 55 80 107 140 160 200 250 355 500 1000

جهاز تحكم1)

06 تحكم تناسبي، هيدروليكي Δpst =10 bar ● ● ● ● ● ● ● ● ● ● ● HD1
Δpst =25 bar ● ● ● ● ● ● ● ● ● ● ● HD2
Δpst =35 bar - - - - - - - ● ● ● ● HD3
تحكم نسبي، كهربائي الجهد = 12 فولت ● ● ● ● ● ● ● ● ● ● ● EP1
الجهد = 24 فولت ● ● ● ● ● ● ● ● ● ● ● EP2
Two-point control, hydraulic - - - - - - - ● ● ● ● HZ
● - - - ● ● ● - - - - HZ1
- ● ● ● - - - - - - - HZ3
تحكم بنقطتين، كهربائي الجهد = 12 فولت ● - - - ● ● ● ● ● ● ● إي زي 1
الجهد = 24 فولت ● - - - ● ● ● ● ● ● ● EZ2
الجهد = 12 فولت - ● ● ● - - - - - - - EZ3
الجهد = 24 فولت - ● ● ● - - - - - - - EZ4
Automatic control,

متعلق بالضغط العالي

 With minimum pressure increase

Δp≤approx.10 bar

With pressure increase Δp= 100bar

 ● ● ● ● ● ● ● ● ● ● ● HA1
● ● ● ● ● ● ● ● ● ● ● HA2
تحكم آلي، متعلق بالسرعة

pst/pHD=3/100 Hydraulic travel direction valve

 - - - - - - - ● ● ● ○ دا
pst/pHD=5/100 Hydraulic travel direction valve ● ● ● ● ● ● ● - - - - DA1
Electric travel direction valve+

electric Vg ماx circuit

 الجهد = 12 فولت ● ● ● ● ● ● ● - - - - DA2
الجهد = 24 فولت ● ● ● ● ● ● ● - - - - DA3
pst/pHD=8/100 Hydraulic travel direction valve ● ● ● ● ● ● ● - - - - DA4
Electric travel direction valve+

electric Vg ماx circuit

 الجهد = 12 فولت ● ● ● ● ● ● ● - - - - DA5
الجهد = 24 فولت ● ● ● ● ● ● ● - - - - DA6
28 55 80 107 140 160 200 250 355 500 1000
07 Without pressure control/override ● ● ● ● ● ● ● ● ● ● ●
التحكم في الضغط fixed setting ● ● ● ● ● ● ● ● ● ● ● D
Hydraulic override, two-point ● ● ● ● ● ● ● 2) 2) 2) 2) E
Hydraulic remote control, proportional － － － － － － － ● ● ● ● G

•=Available       ○= On request        － =Not available

1)Specify response time damping when ordering (sizes 28 to 200)

2) 2nd pressure setting fitted as standard with Version D (sizes 250 to 1000)

Overrides for the HA1 and HA2 controls

28 55 80 107 140 160 200 250 355 500 1000
08 Without override (without code) ● ● ● ● ● ● ● ● ● ● ●
Hydraulic override, remote control, proportional ● ● ● ● ● ● ● ● ● ● ● T
Remote control electric override, two-point الجهد = 12 فولت ● ● ● ● ● ● ● － － － － U1
الجهد = 24 فولت ● ● ● ● ● ● ● － － － － يو تو
Electric override الجهد = 12 فولت ● ● ● ● ● ● ● － － － － R1
+travel direction valve, electric الجهد = 24 فولت ● ● ● ● ● ● ● － － － － R2

مسلسل

09 Series 6, index 3 63

اتجاه الدوران

10 Viewed on drive shaft, bidirectional W

Setting ranges for displacement3)

28 55 80 107 140 160 200 250 355 500 1000
11 Vgmin = 0 to 0.7 Vgmax ● ● ● ● ● ● ● － － － －
Vgmin =0 to 0.4 Vgmax          Vgmax =Vgmax to 0.8 Vgmax － － － － － － － ● ● ● ● 1
Vgmin > 0.4 Vgmax to 0.8 Vgmax          Vgmax =Vgmax to 0.8 Vgmax － － － － － － － ● ● ● ● 2

مادة مانعة للتسرب

12 FKM (إيلاستومر فلوري) V

عمود الدوران

28 55 80 107 140 160 200 250 355 500 1000
13 Splined shaft DIN 5480 ● ● ● ● ● ● ● － － － － A
● ● ● ● ● ● － ● ● ● ● Z
Parallel keyed shaft DIN 6885 － － － － － － － ● ● ● ● P

شفة التركيب

28 55 80 107 140 160 200 250 355 500 1000
14 ISO 3019-2 ذو 4 ثقوب ● ● ● ● ● ● ● ● － － －
8-hole － － － － － － － － ● ● ●

Port plate for working line4)

28 55 80 107 140 160 200 250 355 500 1000
15 SAE working ports A and B at rear 01 0 ● ● ● ● ● ● ● ● ● ● ● 010
7 ● ● ● ● ● ● ● ● ● ● ● 017
SAE working ports A and B lateral, opposite 02 0 ● ● ● ● ● ● ● ● ● ● ● 020
7 ● ● ● ● ● ● ● ● ● ● ● 027
SAE working ports A and B lateral, opposite + rear 15 0 － － － － － － － ● ● ● ● 150
Port plate with 1-stage pressure-relief valves for,mountinga counterbalance valve5) for BVD20 37 0 － － － ● － － － － － － － 370
8 － － － ● － － － － － － － 378
for BVD20/BVD25 38 0 － ● ● ● ● ● ● ●6) － － － 380
8 － ● ● ● ● ● ● ●6) － － － 388
for BVE 38 0 － － － ● ● ● ● － － － － 380
8 － － － ● ● ● ● － － － － 388

0=Without valve

7=Flushing and boost-pressure valve, mounted

8=Counterbalance valve mounted7)

•=Available       ○= On request        － =Not available

3)Please specify exact settings for Vgmin and Vgmax in plain text when ordering:Vgmin=...cm3,Vgmax=...cm3

4) Fastening thread,metric

5) Only possible in combination with HD,EP and HA control.

6) Type code for counterbalance valve to be quoted separately in accordance with data sheet 95522- BVD or 95525-BVE.

7) Counterbalance valve MHB32,please contact us.

Speed sensor

28 55 80 107 140 160 200 250 355 500 10008)
16 Without speed sensor (without code) ● ● ● ● ● ● ● ● ● ● ● O
Prepared for HDD speed sensor ▲ ▲ ▲ ▲ ▲ ▲ ▲ ● ● ● － F
HDD speed sensor mounted9) ▲ ▲ ▲ ▲ ▲ ▲ ▲ ● ● ● － H
Prepared for DSM/DSA speed sensor ● ● ● ● ● ● ● － － － － U
DSM/DSA speed sensor mounted9) ● ● ● ● ● ● ● － － － － V

Swivel angel sensor

28 55 80 107 140 160 200 250 355 500 1000
17 Without swivel angle sensor ● ● ● ● ● ● ● ● ● ● －
Optical swivel angle sensor － － － － － － － ● ● ● ● V
Electric swivel angle sensor － － － － － － － ● ● ● ● E

Connector for solenoids

28 to 200 250 to 1000
18 Without connector (without solenoid, with hydraulic control only)(sizes 250 to 1000) ● － O
－ ●
DEUTSCH molded connector, 2-pin-without suppressor diode ● － P
HIRSCHMANN connector-without suppressor diode － ●

بداية التحكم

28 55 80 107 140 160 200 250 355 500 1000
19 At  Vgmin (standard for HA) ● ● ● ● ● ● ● ● ● ● ● A
At Vgmax(standard for HD, HZ, EP, EZ, DA) ● ● ● ● ● ● ● ● ● ● ● B

Standard/special version

20 Standard version
Standard version with installation variants, e.g. T ports open and closed contrary to standard -Y
Specialversion -S

•=Available       ○= On request      ▲=Not for new projects      － =Not available

Notice

بالإضافة إلى رمز النوع، يرجى تحديد البيانات الفنية ذات الصلة عند تقديم طلبك.

8) Please contact us.

9) Specify type code separately for sensor in accordance with data sheet 95132-DSM or 95133-DSA,95135-HDD and observe the requirements for the electronics.

البيانات الفنية

حجم غير مقبول 28 55 80 107 140 160
Geometric displacement, per revolution1) Vgmax سم3 28.1 54.8 80 107 140 160
Vgmin سم3 0 0 0 0 0 0
Vgx سم3 18 35 51 68 88 61
Maximum rotational speed2)(while adhering to the maximum permissible inlet flow) at Vgmax nnom دورة في الدقيقة 5550 4450 3900 3550 3250 3100
at Vg<Vgx nالحد الأقصى دورة في الدقيقة 8750 7000 6150 5600 5150 4900
where Vgo nالحد الأقصى دورة في الدقيقة 10450 8350 7350 6300 5750 5500
Inlet flow3) at nnom and Vgmax qvmax l/min 156 244 312 380 455 496
Torque4) at Vgmax and Δp=400bar T لا شيء جديد 179 349 509 681 891 1019
at Vgmax and Δp= 350bar T لا شيء جديد 157 305 446 596 778 891
Rotary stiffness Vgmax to Vg/2 cmin kNm/rad 6 10 16 21 34 35
Vg/2 to 0 (interpolated) cmin kNm/rad 18 32 48 65 93 105
Moment of inertia for rotary group JTW kgm2 0.0014 0.0042 0.008 0.127 0.0207 0.0253
Maximum angular acceleration α rad/s2 47000 31500 24000 19000 11000 11000
Case volume V l 0.5 0.75 1.2 1.5 1.8 2.4
Weight approx. m kg 16 28 36 46 61 62
حجم غير مقبول 200 250 355 500 1000
Geometric displacement, per revolution1) Vgmax سم3 200 250 355 500 1000
Vgmin سم3 0 0 0 0 0
Vgx سم3 76 205 300 417 1000
Maximum rotational speed2)(while adhering to the maximum permissible inlet flow) at Vgmax nnom دورة في الدقيقة 2900 2700 2240 2000 1600
at Vg<Vgx nالحد الأقصى دورة في الدقيقة 4600 3300 2650 2400 1600
where Vgo nالحد الأقصى دورة في الدقيقة 5100 3300 2650 2400 1600
Inlet flow3) at nnom and Vgmax qvmax l/min 580 675 795 1000 1600
Torque4) at Vgmax and Δp=400bar T لا شيء جديد 1273 － － － －
at Vgmax and Δp= 350bar T لا شيء جديد 1114 1391 1978 2785 5571
Rotary stiffness Vgmax to Vg/2 cmin kNm/rad 44 60 75 115 281
Vg/2 to 0 (interpolated) cmin kNm/rad 130 181 262 391 820
Moment of inertia for rotary group JTW kgm2 0.0353 0.061 0.102 0.178 0.55
Maximum angular acceleration α rad/s2 11000 10000 8300 5500 4000
Case volume V l 2.7 3.00 5.0 7.0 16.0
Weight approx. m kg 78 100 170 210 430

Speed range

The minimum rotational speed nmin is not restricted. Please consult us regarding applications requiring uniformity of the rotatory motion at low speeds.

1)The minimum and maximum displacement can be steplessly adjusted,(standard setting for sizes 250 to 1000 if ordering code is missing.Vgmin =0.2×Vgالحد الأقصى, Vجي ماكس = Vgماx)

2) The values are applicable:

-for the optimum viscosity range from Vopt=36 to 16 mm2/s

-with hydraulic fluid based on mineral oils

3)Observe limitation of displacement due to counterbalance valve

4) Torque without radial force, with radial force.

Notice

▶Theoretical values, without efficiency and tolerances;values rounded

▶Operation above the maximum values or below the minimum Values may result in a loss of function, a reducd service life or in the destruction of the axial piston unit. Other permissible limit values, such as speed variation, reduced angular acceleration as a function of the frequency and the permissible angular acceleration at start (lower than the maximum angular acceleration) can be found in data sheet 90261.

▼Permissible displacement in relation to rotational speed

Determining the operating characteristics
Inlet flow qv=(Vg×n)/(1000×ηv) [i/min]
Rotational speed n=(qv×1000×ηv)/Vg [rpm]
Torque T=(Vg×Δp×ηhm)/(20×π) [Nm]
طاقة P=(2π×T×n)/60000=(qv×Δp×ηt)/600 [kW]

Key

Vg=Displacement per revolution [cm3]

Δp=Differential pressure [bar]

n=Rotational speed [rpm]

ηv=Volumetric efficiency

ηhm=Hydraulic-mechanical efficiency

ηt=Total efficiency (nt=nv × nhm)

Variable Displacement Piston motor A6VM for Crane

A6VM